This change was done almost entirely automatically using the script
below. This uses the OCaml lexer to read the source files and extract
the strings and locations. Strings which are "candidates" (in this
case, longer than 3 lines) are replaced in the output with quoted
string literals.
Since the OCaml lexer is used, it already substitutes all escape
sequences correctly. I diffed the output of the generator and it is
identical after this change, except for UUIDs, which change because of
how Utils.stable_uuid is implemented.
Thanks: Nicolas Ojeda Bar
$ ocamlfind opt -package unix,compiler-libs.common find_strings.ml \
-o find_strings.opt -linkpkg
$ for f in $( git ls-files -- \*.ml ) ; do ./find_strings.opt $f ; done
open Printf
let read_whole_file path =
let buf = Buffer.create 16384 in
let chan = open_in path in
let maxlen = 16384 in
let b = Bytes.create maxlen in
let rec loop () =
let r = input chan b 0 maxlen in
if r > 0 then (
Buffer.add_substring buf (Bytes.to_string b) 0 r;
loop ()
)
in
loop ();
close_in chan;
Buffer.contents buf
let count_chars c str =
let count = ref 0 in
for i = 0 to String.length str - 1 do
if c = String.unsafe_get str i then incr count
done;
!count
let subs = ref []
let consider_string str loc =
let nr_lines = count_chars '\n' str in
if nr_lines > 3 then
subs := (str, loc) :: !subs
let () =
Lexer.init ();
let filename = Sys.argv.(1) in
let content = read_whole_file filename in
let lexbuf = Lexing.from_string content in
let rec loop () =
let token = Lexer.token lexbuf in
(match token with
| Parser.EOF -> ();
| STRING (s, loc, sopt) ->
consider_string s loc; (* sopt? *)
loop ();
| token ->
loop ();
)
in
loop ();
(* The list of subs is already reversed, which is convenient
* because we must the file substitutions in reverse order.
*)
let subs = !subs in
let new_content = ref content in
List.iter (
fun (str, loc) ->
let { Location.loc_start = { pos_cnum = p1 };
loc_end = { pos_cnum = p2 } } = loc in
let len = String.length !new_content in
let before = String.sub !new_content 0 (p1-1) in
let after = String.sub !new_content (p2+1) (len - p2 - 1) in
new_content := before ^ "{|" ^ str ^ "|}" ^ after
) subs;
let new_content = !new_content in
if content <> new_content then (
(* Update the file in place. *)
let new_filename = filename ^ ".new"
and backup_filename = filename ^ ".bak" in
let chan = open_out new_filename in
fprintf chan "%s" new_content;
close_out chan;
Unix.rename filename backup_filename;
Unix.rename new_filename filename
)
This acts just like FString except that we do reverse device name
translation on it. The only use is in the 'pvs-full' API where we
will use it (in a subsequent commit) to reverse translate the pv_name
field (a device name) before returning it from the daemon.
Compare this to the 'pvs' API which also returns a list of device
names, but using the generator's 'RStructList (RDevice,...)' return
type, where RDevice is similarly reverse translated.
Note in the library-side bindings, because the name has already been
translated in the daemon, we just treat it exactly the same as
FString. The vast majority of this patch is this mechanical change.
Since OCaml 5.1.1, changes to custom blocks caused C finalizers that
call caml_enter_blocking_section to stop working (if they ever did
before). They are relatively inflexible compared to registering an
OCaml finalizer (Gc.finalise) to call Guestfs.close, so use that
instead.
Suggested-by: Guillaume Munch-Maccagnoni
See: https://github.com/ocaml/ocaml/issues/12820
See: db48794fa8
Since OCaml 4 the old and confusing caml_enter_blocking_section and
caml_leave_blocking_section calls have been replaced with
caml_release_runtime_system and caml_acquire_runtime_system (in that
order). Use the new names.
Run this command across the source:
perl -pi.bak -e 's/(20[012][0-9])-20[12][012]/$1-2023/g' `git ls-files`
and remove changes to po{,-docs}/*.po{,t} (these will be regenerated
later when we run 'make dist').
In some places in the generator we were still generating "noalloc".
It was hidden from the previous regexp I used to replace these because
of string escaping.
Updates: commit a69cde79ca
Add a simple way to do not even provide prototypes of deprecated
functions in the C library: this way, users (like our tools) can build
against the library making sure to not use any deprecated function, not
even when compiler deprecation warnings are disabled.
Add it to the majority of our tools/internal libraries, and make sure
that it is not defined when building the API bridges of our bindings.
Right now, deprecated functions of the library do not trigger any
compiler deprecation warning by default; they do that only if
GUESTFS_WARN_DEPRECATED=1 is defined. However, this is not something
that seems to be done often -- at least none of the projects using the
libguestfs C API does that.
Hence, do a small behaviour change to change this on the other way
round: now deprecated functions trigger compiler deprecation warnings by
default, using GUESTFS_NO_WARN_DEPRECATED to disable this (and revert
to the previous behaviour). Even though deprecated functions will not
be removed, we really want users to migrate away from them, as they were
deprecated for good reasons.
Define GUESTFS_NO_WARN_DEPRECATED where needed:
- in all the bindings, as they bind all the functions including the
deprecated ones
- in the guestfish actions, as it exposes almost all the APIs
- in the C API test, as it runs the automated tests of all the APIs that
have them
- for two tests that explicitly test deprecated functions
Some filesystems fall back silently to read-only if there are problems
such a dirty filesystem and an unrecoverable journal. Almost all
conversions involve writing to the root filesystem, so these will
inevitably fail later on with a strange error message.
Test the root filesystem is writable by creating and deleting a
temporary file, and if the creation fails then give better
diagnostics.
Reported-by: Piotr Kliczewski
We reimplemented some functions which can now be found in the OCaml
stdlib since 4.01 (or earlier). The functions I have dropped are:
- String.map
- |>
- iteri (replaced by List.iteri)
- mapi (replaced by List.mapi)
Note that our definition of iteri was slightly wrong: the type of the
function parameter was too wide, allowing (int -> 'a -> 'b) instead of
(int -> 'a -> unit).
I also added this new function to the Std_utils.String module as an
export from stdlib String:
- String.iteri
Thanks: Pino Toscano
If you have a struct containing ‘field’, eg:
type t = { field : int }
then previously to pattern-match on this type, eg. in function
parameters, you had to write:
let f { field = field } =
(* ... use field ... *)
In OCaml >= 3.12 it is possible to abbreviate cases where the field
being matched and the variable being bound have the same name, so now
you can just write:
let f { field } =
(* ... use field ... *)
(Similarly for a field prefixed by a Module name you can use
‘{ Module.field }’ instead of ‘{ Module.field = field }’).
This style is widely used inside the OCaml compiler sources, and is
briefer than the long form, so it makes sense to use it. Furthermore
there was one place in virt-dib where we are already using this new
style, so the old code did not compile on OCaml < 3.12.
See also:
https://forge.ocamlcore.org/docman/view.php/77/112/leroy-cug2010.pdf
This change allows parts of the daemon to be written in the OCaml
programming language. I am using the ‘Main Program in C’ method along
with ‘-output-obj’ to create an object file from the OCaml code /
runtime, as described here:
https://caml.inria.fr/pub/docs/manual-ocaml/intfc.html
Furthermore, change the generator to allow individual APIs to be
implemented in OCaml. This is picked by setting:
impl = OCaml <ocaml_function>;
The generator creates ‘do_function’ (the same one you would have to
write by hand in C), with the function calling the named
‘ocaml_function’ and dealing with marshalling/unmarshalling the OCaml
parameters.
The new module ‘Std_utils’ contains only functions which are pure
OCaml and depend only on the OCaml stdlib. Therefore these functions
may be used by the generator.
The new module is moved to ‘common/mlstdutils’.
This also removes the "<stdlib>" hack, and the code which copied the
library around.
Also ‘Guestfs_config’, ‘Libdir’ and ‘StringMap’ modules are moved
since these are essentially the same.
The bulk of this change is just updating files which use
‘open Common_utils’ to add ‘open Std_utils’ where necessary.
Previously we had lots of types like String, Device, StringList,
DeviceList, etc. where Device was just a String with magical
properties (but only inside the daemon), and DeviceList was just a
list of Device strings.
Replace these with some simple top-level types:
String
StringList
and move the magic into a subtype.
The change is mechanical, for example:
old ---> new
FileIn "filename" String (FileIn, "filename")
DeviceList "devices" StringList (Device, "devices")
Handling BufferIn is sufficiently different from a plain String
throughout all the bindings that it still uses a top-level type.
(Compare with FileIn/FileOut where the only difference is in the
protocol, but the bindings can uniformly treat it as a plain String.)
There is no semantic change, and the generated files are identical
except for a minor change in the (deprecated) Perl
%guestfs_introspection table.
- Make module name explicit, so it's more obvious which module a
function is defined in.
- Group lines of code by feature.
- Capitalize some module names properly.
Just code motion, no functional change.
