Run this command across the source:
perl -pi.bak -e 's/(20[012][0-9])-20[12][012]/$1-2023/g' `git ls-files`
and remove changes to po{,-docs}/*.po{,t} (these will be regenerated
later when we run 'make dist').
This commit deprecates luks-open/luks-open-ro/luks-close for the more
generic sounding names cryptsetup-open/cryptsetup-close, which also
correspond directly to the cryptsetup commands.
The optional cryptsetup-open readonly flag is used to replace the
functionality of luks-open-ro.
The optional cryptsetup-open crypttype parameter can be used to select
the type (corresponding to cryptsetup open --type), which allows us to
open BitLocker-encrypted disks with no extra effort. As a convenience
the crypttype parameter may be omitted, and libguestfs will use a
heuristic (based on vfs-type output) to try to determine the correct
type to use.
The deprecated functions and the new functions are all (re-)written in
OCaml.
There is no new test here, unfortunately. It would be nice to test
Windows BitLocker support in this new API, however the Linux tools do
not support creating BitLocker disks, and while it is possible to
create one under Windows, the smallest compressed disk I could create
is 37M because of a mixture of the minimum support size for BitLocker
disks and the fact that encrypted parts of NTFS cannot be compressed.
Also synchronise with common module.
The internal_yara_scan runs the Yara engine with the previously loaded
rules against the given file.
For each rule matching against the scanned file, a struct containing
the file name and the rule identifier is returned.
The gathered list of yara_detection structs is serialised into XDR format
and written to a file.
Signed-off-by: Matteo Cafasso <noxdafox@gmail.com>
Introduce a new API to create a new squashfs filesystem out of a path
in the guest. It can be configured to exclude paths based on patterns,
and to select which compression use for the filesystem.
The advantage of running mksquashfs directly in the appliance is that
ownerships are properly saved, as opposed to tar_out + local untar.
Run the following command over the source:
perl -pi.bak -e 's/(20[01][0-9])-2016/$1-2017/g' `git ls-files`
(Thanks Rich for the perl snippet, as used in past years.)
Expose the aug_transform API through the library, so it's possible to
add/remove Augeas transformations to handle files in custom places using
existing lenses.
This function allows to download file system data units (blocks) from
the given partition.
The API can be used to detect data hidden within filesystem bad blocks
or slack space.
Moreover for filesystems such as Ext3 and Ext4, this function is the
only way to retrieve deleted files. An example is given in the function
tests.
Signed-off-by: Matteo Cafasso <noxdafox@gmail.com>
- generator: Added tsk_dirent struct
The tsk_dirent struct contains the information gathered via TSK APIs.
The struct contains the following fields:
* tsk_inode: inode of a file
* tsk_type: type of file such as for dirwalk command
* tsk_size: file size in bytes
* tsk_name: path relative to its disk partition
* tsk_flags: bitfield containing extra information
* tsk_spare[1-5]: extra space for future usage
- configure: Added libtsk compile-time check
Ensure libtsk is available at compile time.
If not, daemon routines depending on it won't be available.
- API: internal_filesystem_walk
The internal_filesystem_walk command walks through the FS structures
of a disk partition and returns all the files or directories
which could be found.
The command is able to retrieve information regarding deleted
or unaccessible files where other commands such as stat or find
would fail.
The gathered list of tsk_dirent structs is serialised into XDR format
and written to a file by the appliance.
Signed-off-by: Matteo Cafasso <noxdafox@gmail.com>
Add a new optional bool "directoryslash" to indicate whether the caller
wants trailing slashes in names of directories, defaulting to true (the
current behaviour); this helps with interoperability with other tools
(such as rm).
Related to RHBZ#1293271.
This API already existed (as guestfs___add_libvirt_dom), and was used
by a few tools.
This commit changes it to a public API.
Note that for reasons outlined in the previous commit message, it is
impossible to call this from guestfish or from non-C language
bindings.
The existing APIs guestfs_stat, guestfs_lstat and guestfs_lstatlist
return a stat structure that contains atime, mtime and ctime fields
that store only the timestamp in seconds.
Modern filesystems can store timestamps down to nanosecond
granularity, and the ordinary glibc stat(2) wrapper will return these
in "hidden" stat fields:
struct timespec st_atim; /* Time of last access. */
struct timespec st_mtim; /* Time of last modification. */
struct timespec st_ctim; /* Time of last status change. */
with the following macros defined for backwards compatibility:
#define st_atime st_atim.tv_sec
#define st_mtime st_mtim.tv_sec
#define st_ctime st_ctim.tv_sec
It is not possible to redefine guestfs_stat to return a longer struct
guestfs_stat with room for the extra nanosecond fields, because that
would break the ABI of guestfs_lstatlist as it returns an array
containing consecutive stat structs (not pointers). Changing the
return type of guestfs_stat would break API. Changing the generator
to support symbol versioning is judged to be too intrusive.
Therefore this adds a new struct (guestfs_statns) and new APIs:
guestfs_statns
guestfs_lstatns
guestfs_lstatnslist
which return the new struct (or array of structs in the last case).
The old APIs may of course still be used, forever, but are deprecated
and shouldn't be used in new programs.
Because virt tools are compiled with -DGUESTFS_WARN_DEPRECATED=1, I
have updated all the places calling the deprecated functions. This
has revealed some areas for improvement: in particular virt-diff and
virt-ls could be changed to print the nanosecond fields.
FUSE now returns nanoseconds in stat calls where available, fixing
https://bugzilla.redhat.com/show_bug.cgi?id=1144891
Notes about the implementation:
- guestfs_internal_lstatlist has been removed and replaced by
guestfs_internal_lstatnslist. As the former was an internal API no
one should have been calling it, or indeed can call it unless they
start defining their own header files.
- guestfs_stat and guestfs_lstat have been changed into library-side
functions. They, along with guestfs_lstatlist, are now implemented
as wrappers around the new functions which just throw away the
nanosecond fields.
Sort the structs when generating code. Since the structs are
logically indepedent of each other, this should have no effect except
to make generated files list the structs in a different order.
However this also fixes the following build problem:
File "convert_linux.ml", line 322, characters 43-50:
Error: This expression has type G.stat = Guestfs.stat
but an expression was expected of type G.dirent = Guestfs.dirent
It turns out the OCaml bindings don't like the fact that we have
two structs with a common field name (dirent.ino and stat.ino).
In OCaml < 4.01, this means that any attempt to reference stat.ino
would fail because dirent.ino appears second in the file, overriding
stat.ino.
Sorting the structs has the side effect of making stat.ino appear
second, thus resolving the build failure above.
In OCaml >= 4.01 the compiler now uses some disambiguation rules based
on the known types to resolve this problem, so accessing either field
would work no matter what order they are listed in.
See:
http://ocaml.org/releases/4.01.0.htmlhttp://www.lexifi.com/blog/type-based-selection-label-and-constructorshttp://www.lexifi.com/blog/ocaml-extensions-lexifi-overidding-record-labels-and-constructors
This is useful for generating Linux initramfses from other types of
filesystems. For example:
guestfish --ro -a disk.img -i cpio-out / - | gzip -9 > initrd.img
Look for use of external_functions and fish_functions and replace with
use of external_functions_sorted and fish_functions_sorted where
possible. This ensures that the output of the generator is sorted as
far as possible.
I also checked for uses of internal_functions and documented_functions
but those are not used. The *_sorted versions are always used
instead.
This adds an extra optional boolean 'followsymlinks' flag to those 6
is-* APIs. If the flag is true, then symlinks are followed, ie. we
use stat instead of lstat in the test.
For the rationale behind this change, see:
https://bugzilla.redhat.com/show_bug.cgi?id=974489
Used to create temporary directory or file with an optional suffix.
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
RWMJ:
- Split this out into a new file (daemon/mktemp.c).
- I don't see a reason to deprecate the mkdtemp function which
works fine. Instead remove complex dir-making code from the
new function.
- Test and fix the patch (missing close(fd)).
New api mke2fs for full configuration of filesystem.
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
RWMJ:
- Update description.
- Run and fix the tests.
- Remove bogus filename from po/POTFILES.
Since generator source files were renamed, the comment at the
top of each generated file was wrong.
Unfortunately we cannot allow /* to appear within a comment,
so the space is necessary.
Add a new api xfs_repair for repairing an XFS filesystem.
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
RWMJ:
- Fix non-error return path so it doesn't send two replies.
- Document return code.
Transscribe many hivex(3) APIs into the libguestfs API.
There is one hive handle per libguestfs handle, as with Augeas.
Note that hivex uses iconv_open for some APIs (eg. hivex_value_string).
But since we delete all the i18n files from the appliance, this
doesn't work -- iconv_open returns EINVAL. Therefore hivex APIs which
require iconv cannot be bound in the daemon.
Add new api xfs_admin to change parameters of an XFS filesystem.
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
RWMJ:
- Remove printuuid, printlabel, since they don't change any settings.
- Adjusted the documentation.
- Fix the tests.
The compress flag can be used to control compression, one of: (none),
"compress", "gzip", "bzip2", "xz", "lzop". Thus these calls can now
be used instead of tgz-in/tgz-out/txz-in/txz-out, and also support
more compression types.
Mark these APIs as once_had_no_optargs so that compatibility code is
generated.
This commit makes grep into an optargs API, with flags for extended,
fixed, [case-]insensitive and compressed.
At the same time it deprecates: egrep, fgrep, grepi, egrepi, fgrepi,
zgrep, zegrep, zfgrep, zgrepi, zegrepi and zfgrepi.
