Make use of the recently added 'getprogname' module in gnulib: replace
our guestfs_int_program_name with the getprogname() provided by the
module, since it does the same thing, and in a portable way.
As consequence of the above, use gnulib in a couple of tests that use
getprogname().
Since guestfs_int_program_name is gone, drop the configure checks
associated with it.
By adding common CLEANFILES and DISTCLEANFILES variables to
common-rules.mk, we can remove these from most other Makefiles, and
also clean files more consistently.
Note that bin_PROGRAMS are already cleaned by 'make clean', so I
removed cases where these were unnecessarily added to CLEANFILES.
By moving these two functions out of the common options parsing code,
it means we don't need to depend on all the other machinery of options
parsing, such as the global variables ("verbose"), libconfig, etc.
podcheck.pl is run as part of the tests to perform various checks on
the documentation and the tool.
Currently we check only that the documented options matches the
options that the tool implements and vice versa. This commit would
also allow us (in future) to check --help, --long-options,
--short-options, --version output.
This commit includes scripts to run the tests and various fixes to the
manual pages to ensure that the tests pass.
For guestfish, guestmount, remove '?' from short options. Currently
those tools don't process -?, so I believe these are erroneous:
$ guestfish -\?
Try `guestfish --help' for more information.
For virt-format, the -c, -d and -q options are removed. These options
just give errors because they appear in the short options list but not
in the case statement.
When possible, make the disk image format explicit when invoking tools
or using add-drive. This avoids warnings from qemu about the unspecified
format for the image, and also makes qemu slightly faster (skipping the
disk image probing).
Tests checking the image probing are not touched.
This changes also:
- old-style invocations of tools (`$tool $filename`) into new style
(`$tool -a $filename`)
- add-drive-ro/add-drive-with-if guestfish commands into add/add-drive
with explicit readonly/iface arguments
There should be no change in the tests results.
Improve the error messages produced by C-based tools in case of issues
with the command line options:
- explicitly mention to use -a/-d (and -A/-D in virt-diff)
- when extra arguments are found, mention the correct way to pass
options to certain command line switches (like --format)
- in virt-inspector, give a cleaner error message when neither -i nor
any -m is specified
In all the cases, keep the extra notice to use 'TOOL --help' to get more
help with it.
Like with the previous commit, this replaces instances of:
if (something_bad) {
fprintf (stderr, "%s: error message\n", guestfs_int_program_name);
exit (EXIT_FAILURE);
}
with:
if (something_bad)
error (EXIT_FAILURE, 0, "error message");
(except in a few cases were errno was incorrectly being ignored, in
which case I have fixed that).
It's slightly more complex than the previous commit because we must be
careful to:
- Remove the program name (since error(3) prints it).
- Remove any trailing \n character from the message.
Candidates for replacement were found using:
pcregrep --buffer-size 10M -M '\bfprintf\b.*\n.*\bexit\b' `git ls-files`
Wherever we had code which did:
if (something_bad) {
perror (...);
exit (EXIT_FAILURE);
}
replace this with use of the error(3) function:
if (something_bad)
error (EXIT_FAILURE, errno, ...);
The error(3) function is supplied by glibc, or by gnulib on platforms
which don't have it, and is much more flexible than perror(3). Since
we already use error(3), there seems to be no downside to mandating it
everywhere.
Note there is one nasty catch with error(3): error (EXIT_SUCCESS, ...)
does *not* exit! This is also the reason why error(3) cannot be
marked as __attribute__((noreturn)).
Because the examples can't use gnulib, I did not change them.
To search for multiline patterns of the above form, pcregrep -M turns
out to be very useful:
pcregrep --buffer-size 10M -M '\bperror\b.*\n.*\bexit\b' `git ls-files`
Exit with 3 as return value when fusermount fails, because the specified
mount point is not considered mounted for the user. This is in line
with what the guestunmount documentation says.
Adapt the test-guestunmount-fd test to the updated return value.
Thanks to: Maxim Perevedentsev.
Remove man pages and other pages which 'make clean' did not remove
before.
To evaluate which pages could be removed, I did a full build and
check, and then ran 'make clean' followed by 'git clean -xdf'. By
examining the output of the git clean command I could see which files
were being missed.
Files that are _not_ removed by make clean or make distclean:
- generator-built files
- Makefile, Makefile.in, .deps, .depend
- any ./configure output files (maybe they should be?)
Move the random set of HTML files we build from html/ into
the website/ directory.
Also in the website/ directory, put the index.html file from
http://libguestfs.org, which was previously not under version control.
It is generated from index.html.in so we can automatically add the
current version and release date.
Also in the website/ directory, put various CSS file, images, etc.
which are required by the website and were also previously not under
version control.
Change the 'make website' rule to 'make maintainer-upload-website'.
As the name suggests, it is only useful for the maintainer, and will
fail with an error for anyone else.
Create a new top-level directory called test-data, which will carry
all the test data which is large and/or shared between multiple tests.
There are actually several new subdirectories created:
test-data/binaries: The pre-built binary and library files for random
architectures that we use to test various architecture detection
features (was part of tests/data).
test-data/blank-disks: The blank disks which are used for disk format
detection (was part of tests/data).
test-data/files: Other miscellaneous test files from tests/data that
are not included in the above.
test-data/phony-guests: The phony guests (was tests/guests).
test-data: The top-level directory builds the 'test.iso' image file
that is used for testing the C API and in miscellaneous other tests.
Make sure to close the open files even when test_fuse() returns earlier
because of failures, otherwise the mountpoint is still in use by open
files when later guestunmount is called on it.
Because of previous automated commits, such as changing 'guestfs___'
-> 'guestfs_int_', several function calls no longer lined up with
their parameters, and some lines were too long.
The bulk of this commit was done using emacs batch mode and the
technique described here:
http://www.cslab.pepperdine.edu/warford/BatchIndentationEmacs.html
The changes suggested by emacs were then reviewed by hand.
Done using a sequence of regular expressions like this:
perl -pi.bak -e 's{C</}{F</}g' `git ls-files \*.pod` generator/actions.ml
perl -pi.bak -e 's{C<C:\\}{F<C:\\}g' `git ls-files \*.pod` generator/actions.ml
[etc]
and then tediously checking every change by hand.
The man page for getline says:
ssize_t getline(char **lineptr, size_t *n, FILE *stream);
[...]
If *lineptr is set to NULL and *n is set 0 before the call, then get‐
line() will allocate a buffer for storing the line. This buffer should
be freed by the user program even if getline() failed.
which seems to indicate that we must initialize both line and len to 0
before the first call to getline.
In several places we were not initializing len. The program still
worked fine, but it seems better to initialize the length anyway.
The new behaviour is as follows:
Skip all of the fuse tests:
SKIP_TEST_FUSE_SH=1
Individual tests can be skipped by setting:
SKIP_TEST_FUSE_UMOUNT_RACE_SH=1
SKIP_TEST_GUESTMOUNT_FD=1
SKIP_TEST_GUESTUNMOUNT_FD=1
SKIP_TEST_GUESTUNMOUNT_NOT_MOUNTED_SH=1
This test fails on recent kernels, sometimes.
Apparently calling 'fusermount -u mp' can exit with an EBUSY error,
but still unmount the filesystem. Or possibly guestmount crashes
coincidentally. It's impossible to debug because debugging tools like
strace prevent fuse from working at all.
guestunmount had a -v / --verbose option, but it didn't change the
behaviour of the program in any way.
Make it print the invocations of the underlying fusermount program.
libguestfs has used double and triple underscores in identifiers.
These aren't valid for global names in C++.
The first step is to replace all guestfs___* (3 underscores) with
guestfs_int_*. We've used guestfs_int_* elsewhere already as a prefix
for internal identifiers.
This is an entirely mechanical change done using:
git ls-files | xargs perl -pi.bak -e 's/guestfs___/guestfs_int_/g'
Reference: http://stackoverflow.com/a/228797
* fusermount is Linux-only; on BSD and OS X umount should be used
* fuser has no -v flag on BSD/OSX, and -c is the
POSIX-compatible equivalent of -m
* Does not solve the lack of pretty output of fuser -v, but does make it
work on Mac OS X.
The gnulib 'error' module uses 'program_name'. On some platforms --
but not Linux / glibc -- it references it as:
extern char *program_name;
This means when you compile libguestfs on non-glibc (eg. Mac OS X)
gnulib requires 'program_name' as an external string reference, which
we don't provide.
This change doesn't define this string reference for gnulib, but it
does change the name of the macro we use to avoid conflicts if we
eventually need to export 'program_name' as a string.
Thanks: Margaret Lewicka
Just like --long-options, it makes it possible to know which short
options are supported by each tool; this can help improving the bash
completion, for example.
Switch from acl_to_text to acl_to_any_text, so it is possible to specify
options, like forcing the numeric IDs for users/groups. This ensure the
resulting string has always numberic IDs, so the comparison can always
succeed.
Adapt the comparison string to the lack of final endline now.
The existing APIs guestfs_stat, guestfs_lstat and guestfs_lstatlist
return a stat structure that contains atime, mtime and ctime fields
that store only the timestamp in seconds.
Modern filesystems can store timestamps down to nanosecond
granularity, and the ordinary glibc stat(2) wrapper will return these
in "hidden" stat fields:
struct timespec st_atim; /* Time of last access. */
struct timespec st_mtim; /* Time of last modification. */
struct timespec st_ctim; /* Time of last status change. */
with the following macros defined for backwards compatibility:
#define st_atime st_atim.tv_sec
#define st_mtime st_mtim.tv_sec
#define st_ctime st_ctim.tv_sec
It is not possible to redefine guestfs_stat to return a longer struct
guestfs_stat with room for the extra nanosecond fields, because that
would break the ABI of guestfs_lstatlist as it returns an array
containing consecutive stat structs (not pointers). Changing the
return type of guestfs_stat would break API. Changing the generator
to support symbol versioning is judged to be too intrusive.
Therefore this adds a new struct (guestfs_statns) and new APIs:
guestfs_statns
guestfs_lstatns
guestfs_lstatnslist
which return the new struct (or array of structs in the last case).
The old APIs may of course still be used, forever, but are deprecated
and shouldn't be used in new programs.
Because virt tools are compiled with -DGUESTFS_WARN_DEPRECATED=1, I
have updated all the places calling the deprecated functions. This
has revealed some areas for improvement: in particular virt-diff and
virt-ls could be changed to print the nanosecond fields.
FUSE now returns nanoseconds in stat calls where available, fixing
https://bugzilla.redhat.com/show_bug.cgi?id=1144891
Notes about the implementation:
- guestfs_internal_lstatlist has been removed and replaced by
guestfs_internal_lstatnslist. As the former was an internal API no
one should have been calling it, or indeed can call it unless they
start defining their own header files.
- guestfs_stat and guestfs_lstat have been changed into library-side
functions. They, along with guestfs_lstatlist, are now implemented
as wrappers around the new functions which just throw away the
nanosecond fields.
This gives us finer control over how system calls are done,
and also potentially lets us test more.
Currently two tests are disabled:
- utimens because of https://bugzilla.redhat.com/show_bug.cgi?id=1144766
- utimes because our stat call does not return the nanosecond fields
All tests run under the ./run binary. For a long time the ./run
binary has set the $PATH environment variable to contain all of the
directories with binaries in them.
Therefore there is no reason to use ../fish/guestfish instead of just
plain guestfish (and the same applies to other built binaries).
In most C tools, virt-sysprep and virt-customize, you have to put the
--format parameter before the corresponding -a parameter. ie. The
following is correct:
guestfish --format qcow2 -a disk1 -a disk2
But the following is incorrect. The --format parameter is dangling
and prior to this commit would have been silently ignored:
guestfish -a disk1 -a disk2 --format qcow2
After this change, dangling --format parameters now lead to an error:
guestfish: --format parameter must appear before -a parameter
In virt-customize, also check that --attach-format parameter appears
before --attach parameter.
Thanks: Lingfei Kong
