This refactoring change just moves the cleanup functions around in the
common/utils directory.
libxml2 cleanups are moved to a separate object file, so that we can
still link to libutils even if the main program is not using libxml2
anywhere. Similarly gnulib cleanups.
cleanup.c is renamed to cleanups.c.
A new header file cleanups.h is introduced which will replace
guestfs-internal-frontend-cleanups.h (fully replaced in a later commit).
Remove (before opening round bracket) whitespaces in the documentation
of the Python binding, according to the PEP 8 specification.
This is just code reformatting, with no behaviour changes; no content
changed beside whitespaces, so "git diff -w" gives an empty diff.
Verify the returned values of Python Object constructor functions
are not NULL before adding them to a collection.
This is particularly relevant when constructing Unicode strings in
Python 3 as they will return NULL if non UTF-8 characters are present.
Signed-off-by: Matteo Cafasso <noxdafox@gmail.com>
Make use of functions and types that fit more, and that do the same job:
- use PyErr_NoMemory() on malloc failure
- use PyErr_SetFromErrno when setting an exception from an errno
- throw TypeError if not getting a list when required
The current need for #ifdef's based on the presence of
PyString_FromString makes both the OCaml code of the generator, and the
generated C code a mess to read.
Hence, add three simple wrappers to make both the OCaml, and C code more
readable, and easier to tweak in the future.
This should be just refactoring, with no actual behaviour changes.
Thanks to: Matteo Cafasso
In case there are no event handlers registered with the handle,
get_all_event_callbacks will count 0 elements, trying to malloc a buffer
of that size. POSIX says that this can result in either a null pointer,
or an unusable pointer.
Short-circuit get_all_event_callbacks to allocate nothing when there are
no events, making sure to use its results only when there were events.
Just code motion.
This commit makes it clearer what is a utility and what is part of the
library. It also makes it clear that we should rename:
guestfs-internal-frontend.h -> utils.h
guestfs-internal-frontend-cleanups.h -> cleanups.h (?)
but this commit does not make that change.
Run the following command over the source:
perl -pi.bak -e 's/(20[01][0-9])-2016/$1-2017/g' `git ls-files`
(Thanks Rich for the perl snippet, as used in past years.)
By adding common CLEANFILES and DISTCLEANFILES variables to
common-rules.mk, we can remove these from most other Makefiles, and
also clean files more consistently.
Note that bin_PROGRAMS are already cleaned by 'make clean', so I
removed cases where these were unnecessarily added to CLEANFILES.
Since commit 83e92b4a97, utils.c
includes "ignore-value.h". We copy utils.c into the python sdist
tarball, but it didn't not compile because of the missing header file.
Therefore we need to copy the header in too.
Fixes commit 83e92b4a97.
python/guestfs.py:136:37: E712 comparison to True should be 'if cond is True:' or 'if cond:'
python/t/tests_helper.py:42:8: E713 test for membership should be 'not in'
No functional changes, as the new versions follow the suggested Python
coding style to do the same things.
Reindent Python scripts to make sure lines are not longer than 80
columns.
Regarding autogenerated code (guestfs.py and bindtests.py): add an
helper function to make sure comma-separated lists are wrapped at the
wanted length.
This produces only differences in the indentation of long Python lines,
with no behaviour changes.
Add (after comma) or remove (before opening round bracket, and around
'=' in arguments) whitespaces according to the PEP 8 specification.
This is just code reformatting, with no behaviour changes; no content
changed beside whitespaces, so "git diff -w" gives an empty diff.
Instead of running all the tests manually, the unittest module has a
'discovery' mode to run tests by importing them from a directory: this
requires the tests to have different filenames, since they need to be
imported as modules now (hence an empty __init__.py is added), and the
current naming does not match the convention.
Using unittest as loader/runner brings another change: tests skipped as
whole cannot be done anymore with exit(77), since they are not run but
imported: thus introduce an helper module with decorators applied to the
test classes to skip them according to the current checks. This also
gets us nicer recordings in the unittest log.
Due to the relative imports (needed for the helper code), it is no more
possible to execute tests anymore by invoking them manually; although
it is possible to run single tests, still using unittest's runner:
$ cd python
python$ ../run python -m unittest discover -v t test010Load.py
This does not change anything in what the tests do/check.
Introduce a new kind of bindings tests, 090-retvalues, to check all the
possible return values in bindings; start implementing them for
scripting languages such as GObject introspection, Perl, PHP, Python,
and Ruby, reusing existing implementations where existing.
- use assertIsInstance, assertNotEqual, and assertIsNotNone as more
specific checks (will produce better logging)
- use assertRaises when expecting exceptions being thrown
- when testing internal_test_rhashtable, instead of checking type and
elements of the return values just check the return value as a whole
(easier and already getting all the work needed by unittest)
print "" is no more available in Python 3, and print(...) is available
since Python 2.7; as one of the tests was using print(), use this form
everywhere so the tests can run fine with Python 3.
Remove man pages and other pages which 'make clean' did not remove
before.
To evaluate which pages could be removed, I did a full build and
check, and then ran 'make clean' followed by 'git clean -xdf'. By
examining the output of the git clean command I could see which files
were being missed.
Files that are _not_ removed by make clean or make distclean:
- generator-built files
- Makefile, Makefile.in, .deps, .depend
- any ./configure output files (maybe they should be?)
Move the random set of HTML files we build from html/ into
the website/ directory.
Also in the website/ directory, put the index.html file from
http://libguestfs.org, which was previously not under version control.
It is generated from index.html.in so we can automatically add the
current version and release date.
Also in the website/ directory, put various CSS file, images, etc.
which are required by the website and were also previously not under
version control.
Change the 'make website' rule to 'make maintainer-upload-website'.
As the name suggests, it is only useful for the maintainer, and will
fail with an error for anyone else.
Create a new top-level directory called test-data, which will carry
all the test data which is large and/or shared between multiple tests.
There are actually several new subdirectories created:
test-data/binaries: The pre-built binary and library files for random
architectures that we use to test various architecture detection
features (was part of tests/data).
test-data/blank-disks: The blank disks which are used for disk format
detection (was part of tests/data).
test-data/files: Other miscellaneous test files from tests/data that
are not included in the above.
test-data/phony-guests: The phony guests (was tests/guests).
test-data: The top-level directory builds the 'test.iso' image file
that is used for testing the C API and in miscellaneous other tests.
libguestfs has used double and triple underscores in identifiers.
These aren't valid for global names in C++.
The first step is to replace all guestfs___* (3 underscores) with
guestfs_int_*. We've used guestfs_int_* elsewhere already as a prefix
for internal identifiers.
This is an entirely mechanical change done using:
git ls-files | xargs perl -pi.bak -e 's/guestfs___/guestfs_int_/g'
Reference: http://stackoverflow.com/a/228797
This test launches a dummy guest using IDE. Aarch64 doesn't support
IDE, and because it also doesn't support PCI (virtio-mmio instead)
it's hard to formulate libvirt XML that will work on both x86 and
virtio-mmio.
Since this bug is not architecture specific (RHBZ#912499), skip it on
non-x86. The test will print:
skipping test: arch is not x86 and does not support IDE
The test assumed (for no particular reason) that it could always run a
KVM guest. When run on a machine without KVM, or in a VM without
nested KVM, you get this error:
libvirt: Domain Config error : internal error: no supported architecture for os type 'hvm'
Traceback (most recent call last):
File "./t/820-rhbz912499.py", line 77, in <module>
dom = conn.createXML (xml, libvirt.VIR_DOMAIN_START_AUTODESTROY)
File "/usr/lib64/python2.7/site-packages/libvirt.py", line 3523, in createXML
if ret is None:raise libvirtError('virDomainCreateXML() failed', conn=self)
libvirt.libvirtError: internal error: no supported architecture for os type 'hvm'
FAIL: ./t/820-rhbz912499.py
Use a qemu guest instead, which should have a better chance of working
on all hosts.
This allows the Python binding of guestfs_add_libvirt_dom to work.
There is a regression test to ensure this keeps working.
Note this requires a patched libvirt-python, supporting the
c_pointer() method.
