By moving these two functions out of the common options parsing code,
it means we don't need to depend on all the other machinery of options
parsing, such as the global variables ("verbose"), libconfig, etc.
podcheck.pl is run as part of the tests to perform various checks on
the documentation and the tool.
Currently we check only that the documented options matches the
options that the tool implements and vice versa. This commit would
also allow us (in future) to check --help, --long-options,
--short-options, --version output.
This commit includes scripts to run the tests and various fixes to the
manual pages to ensure that the tests pass.
For guestfish, guestmount, remove '?' from short options. Currently
those tools don't process -?, so I believe these are erroneous:
$ guestfish -\?
Try `guestfish --help' for more information.
For virt-format, the -c, -d and -q options are removed. These options
just give errors because they appear in the short options list but not
in the case statement.
When possible, make the disk image format explicit when invoking tools
or using add-drive. This avoids warnings from qemu about the unspecified
format for the image, and also makes qemu slightly faster (skipping the
disk image probing).
Tests checking the image probing are not touched.
This changes also:
- old-style invocations of tools (`$tool $filename`) into new style
(`$tool -a $filename`)
- add-drive-ro/add-drive-with-if guestfish commands into add/add-drive
with explicit readonly/iface arguments
There should be no change in the tests results.
Improve the error messages produced by C-based tools in case of issues
with the command line options:
- explicitly mention to use -a/-d (and -A/-D in virt-diff)
- when extra arguments are found, mention the correct way to pass
options to certain command line switches (like --format)
- in virt-inspector, give a cleaner error message when neither -i nor
any -m is specified
In all the cases, keep the extra notice to use 'TOOL --help' to get more
help with it.
Like with the previous commit, this replaces instances of:
if (something_bad) {
fprintf (stderr, "%s: error message\n", guestfs_int_program_name);
exit (EXIT_FAILURE);
}
with:
if (something_bad)
error (EXIT_FAILURE, 0, "error message");
(except in a few cases were errno was incorrectly being ignored, in
which case I have fixed that).
It's slightly more complex than the previous commit because we must be
careful to:
- Remove the program name (since error(3) prints it).
- Remove any trailing \n character from the message.
Candidates for replacement were found using:
pcregrep --buffer-size 10M -M '\bfprintf\b.*\n.*\bexit\b' `git ls-files`
Wherever we had code which did:
if (something_bad) {
perror (...);
exit (EXIT_FAILURE);
}
replace this with use of the error(3) function:
if (something_bad)
error (EXIT_FAILURE, errno, ...);
The error(3) function is supplied by glibc, or by gnulib on platforms
which don't have it, and is much more flexible than perror(3). Since
we already use error(3), there seems to be no downside to mandating it
everywhere.
Note there is one nasty catch with error(3): error (EXIT_SUCCESS, ...)
does *not* exit! This is also the reason why error(3) cannot be
marked as __attribute__((noreturn)).
Because the examples can't use gnulib, I did not change them.
To search for multiline patterns of the above form, pcregrep -M turns
out to be very useful:
pcregrep --buffer-size 10M -M '\bperror\b.*\n.*\bexit\b' `git ls-files`
Remove man pages and other pages which 'make clean' did not remove
before.
To evaluate which pages could be removed, I did a full build and
check, and then ran 'make clean' followed by 'git clean -xdf'. By
examining the output of the git clean command I could see which files
were being missed.
Files that are _not_ removed by make clean or make distclean:
- generator-built files
- Makefile, Makefile.in, .deps, .depend
- any ./configure output files (maybe they should be?)
Move the random set of HTML files we build from html/ into
the website/ directory.
Also in the website/ directory, put the index.html file from
http://libguestfs.org, which was previously not under version control.
It is generated from index.html.in so we can automatically add the
current version and release date.
Also in the website/ directory, put various CSS file, images, etc.
which are required by the website and were also previously not under
version control.
Change the 'make website' rule to 'make maintainer-upload-website'.
As the name suggests, it is only useful for the maintainer, and will
fail with an error for anyone else.
Because of previous automated commits, such as changing 'guestfs___'
-> 'guestfs_int_', several function calls no longer lined up with
their parameters, and some lines were too long.
The bulk of this commit was done using emacs batch mode and the
technique described here:
http://www.cslab.pepperdine.edu/warford/BatchIndentationEmacs.html
The changes suggested by emacs were then reviewed by hand.
Done using a sequence of regular expressions like this:
perl -pi.bak -e 's{C</}{F</}g' `git ls-files \*.pod` generator/actions.ml
perl -pi.bak -e 's{C<C:\\}{F<C:\\}g' `git ls-files \*.pod` generator/actions.ml
[etc]
and then tediously checking every change by hand.
libguestfs has used double and triple underscores in identifiers.
These aren't valid for global names in C++.
The first step is to replace all guestfs___* (3 underscores) with
guestfs_int_*. We've used guestfs_int_* elsewhere already as a prefix
for internal identifiers.
This is an entirely mechanical change done using:
git ls-files | xargs perl -pi.bak -e 's/guestfs___/guestfs_int_/g'
Reference: http://stackoverflow.com/a/228797
The gnulib 'error' module uses 'program_name'. On some platforms --
but not Linux / glibc -- it references it as:
extern char *program_name;
This means when you compile libguestfs on non-glibc (eg. Mac OS X)
gnulib requires 'program_name' as an external string reference, which
we don't provide.
This change doesn't define this string reference for gnulib, but it
does change the name of the macro we use to avoid conflicts if we
eventually need to export 'program_name' as a string.
Thanks: Margaret Lewicka
Just like --long-options, it makes it possible to know which short
options are supported by each tool; this can help improving the bash
completion, for example.
All tests run under the ./run binary. For a long time the ./run
binary has set the $PATH environment variable to contain all of the
directories with binaries in them.
Therefore there is no reason to use ../fish/guestfish instead of just
plain guestfish (and the same applies to other built binaries).
In most C tools, virt-sysprep and virt-customize, you have to put the
--format parameter before the corresponding -a parameter. ie. The
following is correct:
guestfish --format qcow2 -a disk1 -a disk2
But the following is incorrect. The --format parameter is dangling
and prior to this commit would have been silently ignored:
guestfish -a disk1 -a disk2 --format qcow2
After this change, dangling --format parameters now lead to an error:
guestfish: --format parameter must appear before -a parameter
In virt-customize, also check that --attach-format parameter appears
before --attach parameter.
Thanks: Lingfei Kong
This changes podwrapper so that the input (POD) files should not
contain an =encoding directive. However they must be UTF-8.
Podwrapper then adds the '=encoding utf8' directive back during final
generation.
This in particular avoids problems with nested =encoding directives in
fragments. These break POD, and are undesirable anyway.
Review every test(!) to ensure that it:
- Doesn't use a generic name (eg. "test1.img", "test.out") for any
temporary file it needs.
- Does instead use a unique name or a temporary name (eg. a name like
"name-of-the-test.img", or a scratch disk).
- Does not use 'rm -f' to clean up its temporary files (so we can
detect errors if the wrong temporary file is created or removed).
This allows tests to be run in parallel, so they don't stomp on each
other's temporary files.
Add a remote drive by doing:
guestfish -a ssh://example.com/path/to/disk.img
There are several different protocols supported, as explained in the
man page.
This affects all virt-* tools that use the common guestfish options
parsing code.
It's simpler to use the glibc 'program_invocation_short_name(3)'
feature, and fall back to a generic solution. Also remove risky
assignments to argv[0].
This API is an easier to use version of the existing guestfs_available,
because the new API returns true/false instead of throwing an error
when a feature from the list is not available.
In truth we've had this implementation internally in the library
and several tools and in Sys::Guestfs::Lib for a long time. This
change just turns it into a publicly consumable API.
For example:
$ guestfish --long-options
--add
--cmd-help
--connect
--csh
--domain
--echo-keys
[etc.]
The idea of this is to make it easier to write a bash completion
script that accurately expands --<TAB> options for each command.
The libutils convenience library is a place for code shared between
the main library, language bindings and virt tools. Note that the
code is statically linked into both the library, each binding and each
tool, but this is an improvement because (a) the source is shared and
(b) libguestfs.so can export fewer private functions.
Currently it contains the cleanup functions, and the functions
guestfs___free_string_list function and guestfs___for_each_disk.
guestfs___for_each_disk has changed so that it no longer
unconditionally sets the error in the guestfs handle. Instead callers
can control error handling.
Not to be confused with the libxml2 macro 'BAD_CAST' which converts
from 'signed char *' to 'unsigned char *'.
The 'bad_cast' function was defined and used all over the place as a
replacement for a '(char *)' cast. I think it is better to make these
casts explicit, instead of hiding them in an obscure function.
These configure flags enable code profiling (with gprof) and code
coverage (with gcov) respectively.
Although this is a nice idea, it's not currently very useful.
Libtool mangles filenames in such a way that gcov cannot locate its
datafiles.
Profiling is of dubious utility with libguestfs which is not CPU-bound
and relies extensively on running external programs (oprofile-like
system profiling that took into account libguestfs + qemu or
libguestfs + qemu + the appliance + filesystem tools *would* be
useful).
Also neither flag will help in capturing data from the appliance.
'make extra-tests' was a monolithic set of tests that did all sorts of
things: valgrind, tests over local guests, tests with upstream qemu,
tests with upstream libvirt, tests with the appliance attach method.
This made it hard to perform individual tests, eg. just valgrind
testing. It was also hard to maintain because the tests were not
located in the same directories as the programs and sometimes
duplicated tests that were run elsewhere.
This commit splits up 'make extra-tests' into 5 separate targets:
make check-valgrind # run a subset of tests under valgrind
make check-valgrind-local-guests # test under valgrind with local guests
make check-with-appliance # test with attach-method == appliance
make check-with-upstream-qemu # test with an alternate/upstream qemu
make check-with-upstream-libvirt # test with an alternate/upstream libvirt
(You can also still run 'make extra-tests' which is now simply
a rule that runs the above 5 targets in order).
This replaces everything that was in the tests/extra directory,
so that has now gone.
This adds standard LICENSE and BUGS sections to all of the man pages
that are processed by podwrapper.
Modify all the calls to $(PODWRAPPER) to add the right --license
parameter according to the content. Note that this relaxes the
license on some code example pages, making them effectively BSD-style
licensed.
section.
Ensure each man page contains consistent COPYRIGHT and AUTHOR
sections.
Remove the LICENSE section. We will add that back in podwrapper in a
later commit.
The new API splits orderly close into a two-step process:
if (guestfs_shutdown (g) == -1) {
/* handle the error, eg. qemu error */
}
guestfs_close (g);
Note that the explicit shutdown step is only necessary in the case
where you have made changes to the disk image and want to handle write
errors. Read the documentation for further information.
This change also:
- deprecates guestfs_kill_subprocess
- turns guestfs_kill_subprocess into the same as guestfs_shutdown
- changes guestfish and other tools to call shutdown + close
where necessary (not for read-only tools)
- updates documentation
- updates examples
MALLOC_PERTURB_ is a glibc feature which causes malloc to wipe memory
before and after it is used, allowing both use-after-free and
uninitialized reads to be detected with relatively little performance
penalty:
http://udrepper.livejournal.com/11429.html?nojs=1
Modify the ./run script so that it always sets this.
We were already using MALLOC_PERTURB_ in most tests. Since ./run is
now setting this, we can remove it from individual Makefiles. Most
TESTS_ENVIRONMENT will now simply look like this:
TESTS_ENVIRONMENT = $(top_builddir)/run --test
This option, when added via
TESTS_ENVIRONMENT = [...] $(top_builddir)/run --test
allows us to run the tests and only print the full output (including
debugging etc) when the test fails.
