Backport: Prevent Ly from zombifying when X.org is terminated

Signed-off-by: AnErrupTion <anerruption@disroot.org>

.github/ISSUE_TEMPLATE/bug.yml

@@ -11,15 +11,11 @@ body:
       options:
         - label: I have looked for any other duplicate issues
           required: true
-        - label: I have reproduced the issue on a fresh install of my OS & Ly with default settings, except ones I will mention
-          required: true
-        - label: I have confirmed this issue also occurs on the latest development version
-          required: true
   - type: input
     id: version
     attributes:
       label: Ly version
-      description: The output of `ly --version`. Please note that only Ly v1.2.0 and above are supported.
+      description: The output of `ly --version`. Please note that only Ly v1.1.0 and above are supported.
       placeholder: 1.1.0-dev.12+2b0301c
     validations:
       required: true
@@ -62,9 +58,8 @@ body:
     attributes:
       label: Relevant logs
       description: |
-        Please copy and paste (or attach) any relevant logs, error messages or any other output. This will be automatically formatted into code, so no need for backticks. Screenshots are accepted if they make life easier for you. The log files (located as specified by `/etc/ly/config.ini`) usually contain relevant information about the problem:
+        Please copy and paste any relevant logs, error messages or any other output. This will be automatically formatted into code, so no need for backticks. Screenshots are accepted if they make life easier for you.
-         - The session log is located at `~/.local/state/ly-session.log` by default.
+        If you're using the latest code on master (for v1.1.0), including your session log (found at /var/log/ly-session.log unless modified) is a good idea. (But make sure it's relevant!)
-         - The system log is located at `/var/log/ly.log` by default.
       render: shell
   - type: textarea
     id: moreinfo

.github/pull_request_template.md

@@ -1,11 +0,0 @@
-## What are the changes about?
-
-_Replace this with a brief description of your changes_
-
-## What existing issue does this resolve?
-
-_Replace this with a reference to an existing issue, or N/A if there is none_
-
-## Pre-requisites
-
-- [ ] I have tested & confirmed the changes work locally

build.zig

@@ -8,11 +8,9 @@ const InitSystem = enum {
     runit,
     s6,
     dinit,
-    sysvinit,
-    freebsd,
 };
 
-const min_zig_string = "0.15.0";
+const min_zig_string = "0.14.0";
 const current_zig = builtin.zig_version;
 
 // Implementing zig version detection through compile time
@@ -23,7 +21,7 @@ comptime {
     }
 }
 
-const ly_version = std.SemanticVersion{ .major = 1, .minor = 3, .patch = 0 };
+const ly_version = std.SemanticVersion{ .major = 1, .minor = 1, .patch = 2 };
 
 var dest_directory: []const u8 = undefined;
 var config_directory: []const u8 = undefined;
@@ -43,9 +41,6 @@ pub fn build(b: *std.Build) !void {
     const version_str = try getVersionStr(b, "ly", ly_version);
     const enable_x11_support = b.option(bool, "enable_x11_support", "Enable X11 support (default is on)") orelse true;
     const default_tty = b.option(u8, "default_tty", "Set the TTY (default is 2)") orelse 2;
-    const fallback_tty = b.option(u8, "fallback_tty", "Set the fallback TTY (default is 2). This value gets embedded into the binary") orelse 2;
-    const fallback_uid_min = b.option(std.posix.uid_t, "fallback_uid_min", "Set the fallback minimum UID (default is 1000). This value gets embedded into the binary") orelse 1000;
-    const fallback_uid_max = b.option(std.posix.uid_t, "fallback_uid_max", "Set the fallback maximum UID (default is 60000). This value gets embedded into the binary") orelse 60000;
 
     default_tty_str = try std.fmt.allocPrint(b.allocator, "{d}", .{default_tty});
 
@@ -53,9 +48,6 @@ pub fn build(b: *std.Build) !void {
     build_options.addOption([]const u8, "prefix_directory", prefix_directory);
     build_options.addOption([]const u8, "version", version_str);
     build_options.addOption(u8, "tty", default_tty);
-    build_options.addOption(u8, "fallback_tty", fallback_tty);
-    build_options.addOption(std.posix.uid_t, "fallback_uid_min", fallback_uid_min);
-    build_options.addOption(std.posix.uid_t, "fallback_uid_max", fallback_uid_max);
     build_options.addOption(bool, "enable_x11_support", enable_x11_support);
 
     const target = b.standardTargetOptions(.{});
@@ -63,13 +55,9 @@ pub fn build(b: *std.Build) !void {
 
     const exe = b.addExecutable(.{
         .name = "ly",
-        .root_module = b.createModule(.{
+        .root_source_file = b.path("src/main.zig"),
-            .root_source_file = b.path("src/main.zig"),
+        .target = target,
-            .target = target,
+        .optimize = optimize,
-            .optimize = optimize,
-        }),
-        // Here until the native backend matures in terms of performance
-        .use_llvm = true,
     });
 
     const zigini = b.dependency("zigini", .{ .target = target, .optimize = optimize });
@@ -80,17 +68,13 @@ pub fn build(b: *std.Build) !void {
     const clap = b.dependency("clap", .{ .target = target, .optimize = optimize });
     exe.root_module.addImport("clap", clap.module("clap"));
 
-    const termbox_dep = b.dependency("termbox2", .{
+    exe.addIncludePath(b.path("include"));
-        .target = target,
-        .optimize = optimize,
-    });
-
     exe.linkSystemLibrary("pam");
     if (enable_x11_support) exe.linkSystemLibrary("xcb");
     exe.linkLibC();
 
     const translate_c = b.addTranslateC(.{
-        .root_source_file = termbox_dep.path("termbox2.h"),
+        .root_source_file = b.path("include/termbox2.h"),
         .target = target,
         .optimize = optimize,
     });
@@ -138,10 +122,6 @@ pub fn Installer(install_config: bool) type {
             try patch_map.put("$PREFIX_DIRECTORY", prefix_directory);
             try patch_map.put("$EXECUTABLE_NAME", executable_name);
 
-            // The "-a" argument doesn't exist on FreeBSD, so we use "-p"
-            // instead to shutdown the system.
-            try patch_map.put("$PLATFORM_SHUTDOWN_ARG", if (init_system == .freebsd) "-p" else "-a");
-
             try install_ly(allocator, patch_map, install_config);
             try install_service(allocator, patch_map);
         }
@@ -155,12 +135,6 @@ fn install_ly(allocator: std.mem.Allocator, patch_map: PatchMap, install_config:
         std.debug.print("warn: {s} already exists as a directory.\n", .{ly_config_directory});
     };
 
-    const ly_custom_sessions_directory = try std.fs.path.join(allocator, &[_][]const u8{ dest_directory, config_directory, "/ly/custom-sessions" });
-
-    std.fs.cwd().makePath(ly_custom_sessions_directory) catch {
-        std.debug.print("warn: {s} already exists as a directory.\n", .{ly_custom_sessions_directory});
-    };
-
     const ly_lang_path = try std.fs.path.join(allocator, &[_][]const u8{ dest_directory, config_directory, "/ly/lang" });
     std.fs.cwd().makePath(ly_lang_path) catch {
         std.debug.print("warn: {s} already exists as a directory.\n", .{ly_lang_path});
@@ -189,51 +163,30 @@ fn install_ly(allocator: std.mem.Allocator, patch_map: PatchMap, install_config:
             try installText(patched_config, config_dir, ly_config_directory, "config.ini", .{});
         }
 
-        const patched_example_config = try patchFile(allocator, "res/config.ini", patch_map);
-        try installText(patched_example_config, config_dir, ly_config_directory, "config.ini.example", .{});
-
         const patched_setup = try patchFile(allocator, "res/setup.sh", patch_map);
         try installText(patched_setup, config_dir, ly_config_directory, "setup.sh", .{ .mode = 0o755 });
     }
 
-    {
-        var custom_sessions_dir = std.fs.cwd().openDir(ly_custom_sessions_directory, .{}) catch unreachable;
-        defer custom_sessions_dir.close();
-
-        const patched_readme = try patchFile(allocator, "res/custom-sessions/README", patch_map);
-        try installText(patched_readme, custom_sessions_dir, ly_custom_sessions_directory, "README", .{});
-    }
-
     {
         var lang_dir = std.fs.cwd().openDir(ly_lang_path, .{}) catch unreachable;
         defer lang_dir.close();
 
-        const languages = [_][]const u8{
+        try installFile("res/lang/cat.ini", lang_dir, ly_lang_path, "cat.ini", .{});
-            "ar.ini",
+        try installFile("res/lang/cs.ini", lang_dir, ly_lang_path, "cs.ini", .{});
-            "cat.ini",
+        try installFile("res/lang/de.ini", lang_dir, ly_lang_path, "de.ini", .{});
-            "cs.ini",
+        try installFile("res/lang/en.ini", lang_dir, ly_lang_path, "en.ini", .{});
-            "de.ini",
+        try installFile("res/lang/es.ini", lang_dir, ly_lang_path, "es.ini", .{});
-            "en.ini",
+        try installFile("res/lang/fr.ini", lang_dir, ly_lang_path, "fr.ini", .{});
-            "es.ini",
+        try installFile("res/lang/it.ini", lang_dir, ly_lang_path, "it.ini", .{});
-            "fr.ini",
+        try installFile("res/lang/pl.ini", lang_dir, ly_lang_path, "pl.ini", .{});
-            "it.ini",
+        try installFile("res/lang/pt.ini", lang_dir, ly_lang_path, "pt.ini", .{});
-            "ja_JP.ini",
+        try installFile("res/lang/pt_BR.ini", lang_dir, ly_lang_path, "pt_BR.ini", .{});
-            "lv.ini",
+        try installFile("res/lang/ro.ini", lang_dir, ly_lang_path, "ro.ini", .{});
-            "pl.ini",
+        try installFile("res/lang/ru.ini", lang_dir, ly_lang_path, "ru.ini", .{});
-            "pt.ini",
+        try installFile("res/lang/sr.ini", lang_dir, ly_lang_path, "sr.ini", .{});
-            "pt_BR.ini",
+        try installFile("res/lang/sv.ini", lang_dir, ly_lang_path, "sv.ini", .{});
-            "ro.ini",
+        try installFile("res/lang/tr.ini", lang_dir, ly_lang_path, "tr.ini", .{});
-            "ru.ini",
+        try installFile("res/lang/uk.ini", lang_dir, ly_lang_path, "uk.ini", .{});
-            "sr.ini",
-            "sv.ini",
-            "tr.ini",
-            "uk.ini",
-            "zh_CN.ini",
-        };
-
-        inline for (languages) |language| {
-            try installFile("res/lang/" ++ language, lang_dir, ly_lang_path, language, .{});
-        }
     }
 
     {
@@ -247,8 +200,7 @@ fn install_ly(allocator: std.mem.Allocator, patch_map: PatchMap, install_config:
         var pam_dir = std.fs.cwd().openDir(pam_path, .{}) catch unreachable;
         defer pam_dir.close();
 
-        try installFile(if (init_system == .freebsd) "res/pam.d/ly-freebsd" else "res/pam.d/ly-linux", pam_dir, pam_path, "ly", .{ .override_mode = 0o644 });
+        try installFile("res/pam.d/ly", pam_dir, pam_path, "ly", .{ .override_mode = 0o644 });
-        try installFile(if (init_system == .freebsd) "res/pam.d/ly-freebsd-autologin" else "res/pam.d/ly-linux-autologin", pam_dir, pam_path, "ly-autologin", .{ .override_mode = 0o644 });
     }
 }
 
@@ -260,8 +212,8 @@ fn install_service(allocator: std.mem.Allocator, patch_map: PatchMap) !void {
             var service_dir = std.fs.cwd().openDir(service_path, .{}) catch unreachable;
             defer service_dir.close();
 
-            const patched_service = try patchFile(allocator, "res/ly@.service", patch_map);
+            const patched_service = try patchFile(allocator, "res/ly.service", patch_map);
-            try installText(patched_service, service_dir, service_path, "ly@.service", .{ .mode = 0o644 });
+            try installText(patched_service, service_dir, service_path, "ly.service", .{ .mode = 0o644 });
         },
         .openrc => {
             const service_path = try std.fs.path.join(allocator, &[_][]const u8{ dest_directory, config_directory, "/init.d" });
@@ -288,13 +240,7 @@ fn install_service(allocator: std.mem.Allocator, patch_map: PatchMap) !void {
             const patched_run = try patchFile(allocator, "res/ly-runit-service/run", patch_map);
             try installText(patched_run, service_dir, service_path, "run", .{ .mode = 0o755 });
 
-            std.fs.cwd().symLink("/run/runit/supervise.ly", supervise_path, .{}) catch |err| {
+            try std.fs.cwd().symLink("/run/runit/supervise.ly", supervise_path, .{});
-                if (err == error.PathAlreadyExists) {
-                    std.debug.print("warn: /run/runit/supervise.ly already exists as a symbolic link.\n", .{});
-                } else {
-                    return err;
-                }
-            };
             std.debug.print("info: installed symlink /run/runit/supervise.ly\n", .{});
         },
         .s6 => {
@@ -325,23 +271,6 @@ fn install_service(allocator: std.mem.Allocator, patch_map: PatchMap) !void {
             const patched_service = try patchFile(allocator, "res/ly-dinit", patch_map);
             try installText(patched_service, service_dir, service_path, "ly", .{});
         },
-        .sysvinit => {
-            const service_path = try std.fs.path.join(allocator, &[_][]const u8{ dest_directory, config_directory, "/init.d" });
-            std.fs.cwd().makePath(service_path) catch {};
-            var service_dir = std.fs.cwd().openDir(service_path, .{}) catch unreachable;
-            defer service_dir.close();
-
-            const patched_service = try patchFile(allocator, "res/ly-sysvinit", patch_map);
-            try installText(patched_service, service_dir, service_path, "ly", .{ .mode = 0o755 });
-        },
-        .freebsd => {
-            const exe_path = try std.fs.path.join(allocator, &[_][]const u8{ dest_directory, prefix_directory, "/bin" });
-            var executable_dir = std.fs.cwd().openDir(exe_path, .{}) catch unreachable;
-            defer executable_dir.close();
-
-            const patched_wrapper = try patchFile(allocator, "res/ly-freebsd-wrapper", patch_map);
-            try installText(patched_wrapper, executable_dir, exe_path, "ly_wrapper", .{ .mode = 0o755 });
-        },
     }
 }
 
@@ -365,7 +294,7 @@ pub fn Uninstaller(uninstall_config: bool) type {
             try deleteFile(allocator, config_directory, "/pam.d/ly", "ly pam file not found");
 
             switch (init_system) {
-                .systemd => try deleteFile(allocator, prefix_directory, "/lib/systemd/system/ly@.service", "systemd service not found"),
+                .systemd => try deleteFile(allocator, prefix_directory, "/lib/systemd/system/ly.service", "systemd service not found"),
                 .openrc => try deleteFile(allocator, config_directory, "/init.d/ly", "openrc service not found"),
                 .runit => try deleteTree(allocator, config_directory, "/sv/ly", "runit service not found"),
                 .s6 => {
@@ -373,8 +302,6 @@ pub fn Uninstaller(uninstall_config: bool) type {
                     try deleteFile(allocator, config_directory, "/s6/adminsv/default/contents.d/ly-srv", "s6 admin service not found");
                 },
                 .dinit => try deleteFile(allocator, config_directory, "/dinit.d/ly", "dinit service not found"),
-                .sysvinit => try deleteFile(allocator, config_directory, "/init.d/ly", "sysvinit service not found"),
-                .freebsd => try deleteFile(allocator, prefix_directory, "/bin/ly_wrapper", "freebsd wrapper not found"),
             }
         }
     };
@@ -415,7 +342,7 @@ fn getVersionStr(b: *std.Build, name: []const u8, version: std.SemanticVersion)
 
             const ancestor_ver = try std.SemanticVersion.parse(tagged_ancestor);
             if (version.order(ancestor_ver) != .gt) {
-                std.debug.print("{s} version '{f}' must be greater than tagged ancestor '{f}'\n", .{ name, version, ancestor_ver });
+                std.debug.print("{s} version '{}' must be greater than tagged ancestor '{}'\n", .{ name, version, ancestor_ver });
                 std.process.exit(1);
             }
 
@@ -450,11 +377,8 @@ fn patchFile(allocator: std.mem.Allocator, source_file: []const u8, patch_map: P
     var file = try std.fs.cwd().openFile(source_file, .{});
     defer file.close();
 
-    const stat = try file.stat();
+    const reader = file.reader();
-
+    var text = try reader.readAllAlloc(allocator, std.math.maxInt(u16));
-    var buffer: [4096]u8 = undefined;
-    var reader = file.reader(&buffer);
-    var text = try reader.interface.readAlloc(allocator, stat.size);
 
     var iterator = patch_map.iterator();
     while (iterator.next()) |kv| {
@@ -476,10 +400,8 @@ fn installText(
     var file = try destination_directory.createFile(destination_file, options);
     defer file.close();
 
-    var buffer: [1024]u8 = undefined;
+    const writer = file.writer();
-    var writer = file.writer(&buffer);
+    try writer.writeAll(text);
-    try writer.interface.writeAll(text);
-    try writer.interface.flush();
 
     std.debug.print("info: installed {s}/{s}\n", .{ destination_directory_path, destination_file });
 }

build.zig.zon

@@ -1,20 +1,16 @@
 .{
     .name = .ly,
-    .version = "1.3.0",
+    .version = "1.1.2",
     .fingerprint = 0xa148ffcc5dc2cb59,
-    .minimum_zig_version = "0.15.0",
+    .minimum_zig_version = "0.14.0",
     .dependencies = .{
         .clap = .{
-            .url = "git+https://github.com/Hejsil/zig-clap#5289e0753cd274d65344bef1c114284c633536ea",
+            .url = "https://github.com/Hejsil/zig-clap/archive/refs/tags/0.10.0.tar.gz",
-            .hash = "clap-0.11.0-oBajB-HnAQDPCKYzwF7rO3qDFwRcD39Q0DALlTSz5H7e",
+            .hash = "clap-0.10.0-oBajB434AQBDh-Ei3YtoKIRxZacVPF1iSwp3IX_ZB8f0",
         },
         .zigini = .{
-            .url = "git+https://github.com/AnErrupTion/zigini?ref=zig-0.15.0#9281f47702b57779e831d7618e158abb8eb4d4a2",
+            .url = "https://github.com/Kawaii-Ash/zigini/archive/2ed3d417f17fab5b0ee8cad8a63c6d62d7ac1042.tar.gz",
-            .hash = "zigini-0.3.3-36M0FRJJAADZVq5HPm-hYKMpFFTr0OgjbEYcK2ijKZ5n",
+            .hash = "zigini-0.3.1-BSkB7XJGAAB2E-sKyzhTaQCBlYBL8yqzE4E_jmSY99sC",
-        },
-        .termbox2 = .{
-            .url = "git+https://github.com/AnErrupTion/termbox2?ref=master#290ac6b8225aacfd16851224682b851b65fcb918",
-            .hash = "N-V-__8AAGcUBQAa5vov1Yi_9AXEffFQ1e2KsXaK4dgygRKq",
         },
     },
     .paths = .{""},

readme.md

@@ -1,19 +1,14 @@
-# The Ly display manager
+# Ly - a TUI display manager
+
+## Development is now continuing on [Codeberg](https://codeberg.org/AnErrupTion/ly), with the [GitHub](https://github.com/fairyglade/ly) repository becoming a mirror. Issues & pull requests on GitHub will be ignored from now on.
 
 ![Ly screenshot](.github/screenshot.png "Ly screenshot")
 
-Ly is a lightweight TUI (ncurses-like) display manager for Linux and BSD,
+Ly is a lightweight TUI (ncurses-like) display manager for Linux and BSD.
-designed with portability in mind (e.g. it does not require systemd to run).
-
-Join us on Matrix over at [#ly:envs.net](https://matrix.to/#/#ly:envs.net)!
-
-**Note**: Development happens on [Codeberg](https://codeberg.org/fairyglade/ly)
-with a mirror on [GitHub](https://github.com/fairyglade/ly).
 
 ## Dependencies
-
 - Compile-time:
-  - zig 0.15.x
+  - zig 0.14.0
   - libc
   - pam
   - xcb (optional, required by default; needed for X11 support)
@@ -24,267 +19,256 @@ with a mirror on [GitHub](https://github.com/fairyglade/ly).
   - brightnessctl
 
 ### Debian
-
 ```
-# apt install build-essential libpam0g-dev libxcb-xkb-dev xauth xserver-xorg brightnessctl
+# apt install build-essential libpam0g-dev libxcb-xkb-dev
 ```
 
 ### Fedora
-
 **Warning**: You may encounter issues with SELinux on Fedora.
 It is recommended to add a rule for Ly as it currently does not ship one.
 
 ```
-# dnf install kernel-devel pam-devel libxcb-devel zig xorg-x11-xauth xorg-x11-server brightnessctl
+# dnf install kernel-devel pam-devel libxcb-devel zig
 ```
 
-### FreeBSD
-
-```
-# pkg install ca_root_nss libxcb git xorg xauth
-```
-
-## Availability
-
-[![Packaging status](https://repology.org/badge/vertical-allrepos/ly-display-manager.svg?exclude_unsupported=1)](https://repology.org/project/ly-display-manager/versions)
-
 ## Support
+The following desktop environments were tested with success:
 
-Ly has been tested with a wide variety of desktop environments and window
+[Wayland Environments](#supported-wayland-environments)
-managers, all of which you can find in the sections below:
 
-[Wayland environments](#supported-wayland-environments)
+[X11 Environments](#supported-x11-environments)
 
-[X11 environments](#supported-x11-environments)
+Ly should work with any X desktop environment, and provides
+basic wayland support (sway works very well, for example).
 
-Logs are defined by `/etc/ly/config.ini`:
+## systemd?
-
+Unlike what you may have heard, Ly does not require `systemd`,
-- The session log is located at `~/.local/state/ly-session.log` by default.
+and was even specifically designed not to depend on `logind`.
-- The system log is located at `/var/log/ly.log` by default.
+You should be able to make it work easily with a better init,
-
+changing the source code won't be necessary :)
-## Manually building
-
-The procedure for manually building Ly is pretty standard:
 
+## Cloning and Compiling
+Clone the repository
+```
+$ git clone https://codeberg.org/AnErrupTion/ly
+```
+
+Change the directory to ly
 ```
-$ git clone https://codeberg.org/fairyglade/ly.git
 $ cd ly
+```
+
+Compile
+```
 $ zig build
 ```
 
-After building, you can (optionally) test Ly in a terminal emulator, although
+Test in the configured tty (tty2 by default)
-authentication will **not** work:
+or a terminal emulator (but authentication won't work)
-
 ```
 $ zig build run
 ```
 
-**Important**: While you can also run Ly in a terminal emulator as root, it is
+**Important**: Running Ly in a terminal emulator as root is *not* recommended. If you
-**not** recommended either. If you want to properly test Ly, please enable its
+want to properly test Ly, please enable its service (as described below) and reboot
-service (as described below) and reboot your machine.
+your machine.
-
-The following sections show how to install Ly for a particular init system.
-Because the procedure is very similar for all of them, the commands will only
-be detailed for the first section (which is about systemd).
-
-**Note**: All following sections will assume you are using LightDM for
-convenience sake.
-
-### systemd
-
-Now, you can install Ly on your system:
 
+Install Ly for systemd-based systems (the default)
 ```
-# zig build installexe -Dinit_system=systemd
+# zig build installexe
 ```
 
-**Note**: The `init_system` parameter is optional and defaults to `systemd`.
+Instead of DISPLAY_MANAGER you need to add your DM:
-
+- gdm.service
-Note that you also need to disable your current display manager. For example,
+- sddm.service
-if LightDM is the current display manager, you can execute the following
+- lightdm.service
-command:
-
 ```
-# systemctl disable lightdm.service
+# systemctl disable DISPLAY_MANAGER
 ```
 
-Then, similarly to the previous command, you need to enable the Ly service:
+Enable the service
-
 ```
-# systemctl enable ly@tty2.service
+# systemctl enable ly.service
 ```
 
-**Important**: Because Ly runs in a TTY, you **must** disable the TTY service
+If you need to switch between ttys after Ly's start you also have to
-that Ly will run on, otherwise bad things will happen. For example, to disable `getty` spawning on TTY 2, you need to execute the following command:
+disable getty on Ly's tty to prevent "login" from spawning on top of it
-
 ```
 # systemctl disable getty@tty2.service
 ```
 
-You can change the TTY Ly will run on by editing the corresponding
-service file for your platform, or on systemd, by enabling the service on
-different TTYs, as is done above.
-
 ### OpenRC
+**NOTE 1**: On Gentoo, Ly will disable the `display-manager-init` service in order to run.
 
+Clone, compile and test.
+
+Install Ly and the provided OpenRC service
 ```
 # zig build installexe -Dinit_system=openrc
-# rc-update del lightdm
+```
+
+Enable the service
+```
 # rc-update add ly
+```
+
+You can edit which tty Ly will start on by editing the `tty` option in the configuration file.
+
+If you choose a tty that already has a login/getty running (has a basic login prompt),
+then you have to disable getty, so it doesn't respawn on top of ly
+```
 # rc-update del agetty.tty2
 ```
 
-**Note**: On Gentoo specifically, you also **must** comment out the appropriate
+**NOTE 2**: To avoid a console spawning on top on Ly, comment out the appropriate line from /etc/inittab (default is 2).
-line for the TTY in /etc/inittab.
 
 ### runit
-
 ```
 # zig build installexe -Dinit_system=runit
-# rm /var/service/lightdm
 # ln -s /etc/sv/ly /var/service/
+```
+
+By default, ly will run on tty2. To change the tty it must be set in `/etc/ly/config.ini`
+
+You should as well disable your existing display manager service if needed, e.g.:
+
+```
+# rm /var/service/lxdm
+```
+
+The agetty service for the tty console where you are running ly should be disabled.
+For instance, if you are running ly on tty2 (that's the default, check your `/etc/ly/config.ini`)
+you should disable the agetty-tty2 service like this:
+
+```
 # rm /var/service/agetty-tty2
 ```
 
 ### s6
-
 ```
 # zig build installexe -Dinit_system=s6
-# s6-rc -d change lightdm
+```
+
+Then, edit `/etc/s6/config/ttyX.conf` and set `SPAWN="no"`, where X is the TTY ID (e.g. `2`).
+
+Finally, enable the service:
+
+```
 # s6-service add default ly-srv
 # s6-db-reload
 # s6-rc -u change ly-srv
 ```
 
-To disable TTY 2, edit `/etc/s6/config/tty2.conf` and set `SPAWN="no"`.
-
 ### dinit
-
 ```
 # zig build installexe -Dinit_system=dinit
-# dinitctl disable lightdm
 # dinitctl enable ly
 ```
 
-To disable TTY 2, go to `/etc/dinit.d/config/console.conf` and modify
+In addition to the steps above, you will also have to keep a TTY free within `/etc/dinit.d/config/console.conf`.
-`ACTIVE_CONSOLES`.
 
-### sysvinit
+To do that, change `ACTIVE_CONSOLES` so that the tty that ly should use in `/etc/ly/config.ini` is free.
-
-```
-# zig build installexe -Dinit_system=sysvinit
-# update-rc.d lightdm disable
-# update-rc.d ly defaults
-```
-
-To disable TTY 2, go to `/etc/inittab` and comment out the line containing `tty2`.
-
-### FreeBSD
-
-```
-# zig build installexe -Dprefix_directory=/usr/local -Dconfig_directory=/usr/local/etc -Dinit_system=freebsd
-# sysrc lightdm_enable="NO"
-```
-
-To enable Ly, add the following entry to `/etc/gettytab`:
-
-```
-Ly:\
-	:lo=/usr/local/bin/ly_wrapper:\
-	:al=root:
-```
-
-Then, modify the command field of the `ttyv1` terminal entry in `/etc/ttys`
-(TTYs in FreeBSD start at 0):
-
-```
-ttyv1 "/usr/libexec/getty Ly" xterm on secure
-```
 
 ### Updating
-
+You can also install Ly without overrding the current configuration file. That's called
-You can also install Ly without overrding the current configuration file. This
+*updating*. To update, simply run:
-is called **updating**. To update, simply run:
 
 ```
 # zig build installnoconf
 ```
 
-You can, of course, still select the init system of your choice when using this
+You can, of course, still select the init system of your choice when using this command.
-command.
+
+## Arch Linux Installation
+You can install ly from the [`[extra]` repos](https://archlinux.org/packages/extra/x86_64/ly/):
+```
+# pacman -S ly
+```
+
+## Gentoo Installation
+You can install ly from the GURU repository:
+
+Note: If the package is masked, you may need to unmask it using ~amd64 keyword:
+```bash
+# echo 'x11-misc/ly ~amd64' >> /etc/portage/package.accept_keywords
+```
+
+1. Enable the GURU repository:
+```bash
+# eselect repository enable guru
+```
+
+2. Sync the GURU repository:
+```bash
+# emaint sync -r guru
+```
+
+3. Install ly from source:
+```bash
+# emerge --ask x11-misc/ly
+```
 
 ## Configuration
-
+You can find all the configuration in `/etc/ly/config.ini`.
-You can find all the configuration in `/etc/ly/config.ini`. The file is fully
+The file is commented, and includes the default values.
-commented, and includes the default values.
 
 ## Controls
+Use the up and down arrow keys to change the current field, and the
+left and right arrow keys to change the target desktop environment
+while on the desktop field (above the login field).
 
-Use the Up/Down arrow keys to change the current field, and the Left/Right
+## .xinitrc
-arrow keys to scroll through the different fields (whether it be the info line,
+If your .xinitrc doesn't work make sure it is executable and includes a shebang.
-the desktop environment, or the username). The info line is where messages and
+This file is supposed to be a shell script! Quoting from xinit's man page:
-errors are displayed.
 
-## A note on .xinitrc
+> If no specific client program is given on the command line, xinit will look for a file in the user's home directory called .xinitrc to run as a shell script to start up client programs.
-
-If your `.xinitrc` file doesn't work ,make sure it is executable and includes a
-shebang. This file is supposed to be a shell script! Quoting from `xinit`'s man
-page:
-
-> If no specific client program is given on the command line, xinit will look
-> for a file in the user's home directory called .xinitrc to run as a shell
-> script to start up client programs.
-
-A typical shebang for a shell script looks like this:
 
+On Arch Linux, the example .xinitrc (/etc/X11/xinit/xinitrc) starts like this:
 ```
 #!/bin/sh
 ```
 
 ## Tips
-
 - The numlock and capslock state is printed in the top-right corner.
 - Use the F1 and F2 keys to respectively shutdown and reboot.
-- Take a look at your `.xsession` file if X doesn't start, as it can interfere
+- Take a look at your .xsession if X doesn't start, as it can interfere
   (this file is launched with X to configure the display properly).
 
-## Supported Wayland environments
+## Supported Wayland Environments
+ - budgie
+ - cosmic
+ - deepin
+ - enlightenment
+ - gnome
+ - hyprland
+ - kde
+ - labwc
+ - niri
+ - pantheon
+ - sway
+ - weston
 
-- budgie
+## Supported X11 Environments
-- cosmic
+ - awesome
-- deepin
+ - bspwm
-- enlightenment
+ - budgie
-- gnome
+ - cinnamon
-- hyprland
+ - dwm
-- kde
+ - enlightenment
-- labwc
+ - gnome
-- niri
+ - kde
-- pantheon
+ - leftwm
-- sway
+ - lxde
-- weston
+ - mate
+ - maxx
+ - pantheon
+ - qwm
+ - spectrwm
+ - windowmaker
+ - xfce
+ - xmonad
 
-## Supported X11 environments
 
-- awesome
+## Additional Information
-- bspwm
+The name "Ly" is a tribute to the fairy from the game Rayman.
-- budgie
+Ly was tested by oxodao, who is some seriously awesome dude.
-- cinnamon
-- dwm
-- enlightenment
-- gnome
-- kde
-- leftwm
-- lxde
-- mate
-- maxx
-- pantheon
-- qwm
-- spectrwm
-- windowmaker
-- xfce
-- xmonad
-
-## A final note
-
-The name "Ly" is a tribute to the fairy from the game Rayman. Ly was tested by
-oxodao, who is some seriously awesome dude.

res/config.ini

@@ -1,14 +1,14 @@
 # Ly supports 24-bit true color with styling, which means each color is a 32-bit value.
 # The format is 0xSSRRGGBB, where SS is the styling, RR is red, GG is green, and BB is blue.
 # Here are the possible styling options:
-# TB_BOLD      0x01000000
+#define TB_BOLD      0x01000000
-# TB_UNDERLINE 0x02000000
+#define TB_UNDERLINE 0x02000000
-# TB_REVERSE   0x04000000
+#define TB_REVERSE   0x04000000
-# TB_ITALIC    0x08000000
+#define TB_ITALIC    0x08000000
-# TB_BLINK     0x10000000
+#define TB_BLINK     0x10000000
-# TB_HI_BLACK  0x20000000
+#define TB_HI_BLACK  0x20000000
-# TB_BRIGHT    0x40000000
+#define TB_BRIGHT    0x40000000
-# TB_DIM       0x80000000
+#define TB_DIM       0x80000000
 # Programmatically, you'd apply them using the bitwise OR operator (|), but because Ly's
 # configuration doesn't support using it, you have to manually compute the color value.
 # Note that, if you want to use the default color value of the terminal, you can use the
@@ -23,8 +23,6 @@ allow_empty_password = true
 # doom     -> PSX DOOM fire
 # matrix   -> CMatrix
 # colormix -> Color mixing shader
-# gameoflife -> John Conway's Game of Life
-# dur_file -> .dur file format (https://github.com/cmang/durdraw/tree/master)
 animation = none
 
 # Stop the animation after some time
@@ -40,38 +38,8 @@ animation_timeout_sec = 0
 asterisk = *
 
 # The number of failed authentications before a special animation is played... ;)
-# If set to 0, the animation will never be played
 auth_fails = 10
 
-# Identifier for battery whose charge to display at top left
-# Primary battery is usually BAT0 or BAT1
-# If set to null, battery status won't be shown
-battery_id = null
-
-# Automatic login configuration
-# This feature allows Ly to automatically log in a user without password prompt.
-# IMPORTANT: Both auto_login_user and auto_login_session must be set for this to work.
-# Autologin only happens once at startup - it won't re-trigger after logout.
-
-# PAM service name to use for automatic login
-# The default service (ly-autologin) uses pam_permit to allow login without password
-# The appropriate platform-specific PAM configuration (ly-autologin) will be used automatically
-auto_login_service = ly-autologin
-
-# Session name to launch automatically
-# To find available session names, check the .desktop files in:
-#   - /usr/share/xsessions/ (for X11 sessions)
-#   - /usr/share/wayland-sessions/ (for Wayland sessions)
-# Use the filename without .desktop extension, or the value of DesktopNames field
-# Examples: "i3", "sway", "gnome", "plasma", "xfce"
-# If null, automatic login is disabled
-auto_login_session = null
-
-# Username to automatically log in
-# Must be a valid user on the system
-# If null, automatic login is disabled
-auto_login_user = null
-
 # Background color id
 bg = 0x00000000
 
@@ -81,12 +49,6 @@ bg = 0x00000000
 # fa   -> Farsi
 bigclock = none
 
-# Set bigclock to 12-hour notation.
-bigclock_12hr = false
-
-# Set bigclock to show the seconds.
-bigclock_seconds = false
-
 # Blank main box background
 # Setting to false will make it transparent
 blank_box = true
@@ -98,14 +60,14 @@ border_fg = 0x00FFFFFF
 # If set to null, none will be shown
 box_title = null
 
-# Brightness decrease command
+# Brightness increase command
-brightness_down_cmd = $PREFIX_DIRECTORY/bin/brightnessctl -q -n s 10%-
+brightness_down_cmd = $PREFIX_DIRECTORY/bin/brightnessctl -q s 10%-
 
 # Brightness decrease key, or null to disable
 brightness_down_key = F5
 
 # Brightness increase command
-brightness_up_cmd = $PREFIX_DIRECTORY/bin/brightnessctl -q -n s +10%
+brightness_up_cmd = $PREFIX_DIRECTORY/bin/brightnessctl -q s +10%
 
 # Brightness increase key, or null to disable
 brightness_up_key = F6
@@ -120,9 +82,6 @@ clock = null
 # CMatrix animation foreground color id
 cmatrix_fg = 0x0000FF00
 
-# CMatrix animation character string head color id
-cmatrix_head_col = 0x01FFFFFF
-
 # CMatrix animation minimum codepoint. It uses a 16-bit integer
 # For Japanese characters for example, you can use 0x3000 here
 cmatrix_min_codepoint = 0x21
@@ -140,42 +99,22 @@ colormix_col2 = 0x000000FF
 # Color mixing animation third color id
 colormix_col3 = 0x20000000
 
-# Custom sessions directory
+# Console path
-# You can specify multiple directories,
+console_dev = /dev/console
-# e.g. $CONFIG_DIRECTORY/ly/custom-sessions:$PREFIX_DIRECTORY/share/custom-sessions
-custom_sessions = $CONFIG_DIRECTORY/ly/custom-sessions
 
 # Input box active by default on startup
 # Available inputs: info_line, session, login, password
 default_input = login
 
-# DOOM animation fire height (1 thru 9)
+# DOOM animation top color (low intensity flames)
-doom_fire_height = 6
+doom_top_color = 0x00FF0000
 
-# DOOM animation fire spread (0 thru 4)
+# DOOM animation middle color (medium intensity flames)
-doom_fire_spread = 2
+doom_middle_color = 0x00FFFF00
 
-# DOOM animation custom top color (low intensity flames)
+# DOOM animation bottom color (high intensity flames)
-doom_top_color = 0x009F2707
-
-# DOOM animation custom middle color (medium intensity flames)
-doom_middle_color = 0x00C78F17
-
-# DOOM animation custom bottom color (high intensity flames)
 doom_bottom_color = 0x00FFFFFF
 
-# Dur file path
-dur_file_path = $CONFIG_DIRECTORY/ly/example.dur
-
-# Dur offset x direction
-dur_x_offset = 0
-
-# Dur offset y direction
-dur_y_offset = 0
-
-# Set margin to the edges of the DM (useful for curved monitors)
-edge_margin = 0
-
 # Error background color id
 error_bg = 0x00000000
 
@@ -186,70 +125,12 @@ error_fg = 0x01FF0000
 # Foreground color id
 fg = 0x00FFFFFF
 
-# Render true colors (if supported)
-# If false, output will be in eight-color mode
-# All eight-color mode color codes:
-# TB_DEFAULT              0x0000
-# TB_BLACK                0x0001
-# TB_RED                  0x0002
-# TB_GREEN                0x0003
-# TB_YELLOW               0x0004
-# TB_BLUE                 0x0005
-# TB_MAGENTA              0x0006
-# TB_CYAN                 0x0007
-# TB_WHITE                0x0008
-# If full color is off, the styling options still work. The colors are
-# always 32-bit values with the styling in the most significant byte.
-# Note: If using the dur_file animation option and the dur file's color range 
-# is saved as 256 with this option disabled, the file will not be drawn.
-full_color = true
-
-# Game of Life entropy interval (0 = disabled, >0 = add entropy every N generations)
-# 0 -> Pure Conway's Game of Life (will eventually stabilize)
-# 10 -> Add entropy every 10 generations (recommended for continuous activity)
-# 50+ -> Less frequent entropy for more natural evolution
-gameoflife_entropy_interval = 10
-
-# Game of Life animation foreground color id
-gameoflife_fg = 0x0000FF00
-
-# Game of Life frame delay (lower = faster animation, higher = slower)
-# 1-3 -> Very fast animation
-# 6 -> Default smooth animation speed
-# 10+ -> Slower, more contemplative speed
-gameoflife_frame_delay = 6
-
-# Game of Life initial cell density (0.0 to 1.0)
-# 0.1 -> Sparse, minimal activity
-# 0.4 -> Balanced activity (recommended)
-# 0.7+ -> Dense, chaotic patterns
-gameoflife_initial_density = 0.4
-
-# Command executed when pressing hibernate key (can be null)
-hibernate_cmd = null
-
-# Specifies the key used for hibernate (F1-F12)
-hibernate_key = F4
-
 # Remove main box borders
 hide_borders = false
 
 # Remove power management command hints
 hide_key_hints = false
 
-# Remove keyboard lock states from the top right corner
-hide_keyboard_locks = false
-
-# Remove version number from the top left corner
-hide_version_string = false
-
-# Command executed when no input is detected for a certain time
-# If null, no command will be executed
-inactivity_cmd = null
-
-# Executes a command after a certain amount of seconds
-inactivity_delay = 0
-
 # Initial text to show on the info line
 # If set to null, the info line defaults to the hostname
 initial_info_text = null
@@ -261,25 +142,21 @@ input_len = 34
 # Available languages are found in $CONFIG_DIRECTORY/ly/lang/
 lang = en
 
+# Load the saved desktop and username
+load = true
+
 # Command executed when logging in
 # If null, no command will be executed
 # Important: the code itself must end with `exec "$@"` in order to launch the session!
 # You can also set environment variables in there, they'll persist until logout
 login_cmd = null
 
-# Path for login.defs file (used for listing all local users on the system on
-# Linux)
-login_defs_path = /etc/login.defs
-
 # Command executed when logging out
 # If null, no command will be executed
 # Important: the session will already be terminated when this command is executed, so
 # no need to add `exec "$@"` at the end
 logout_cmd = null
 
-# General log file path
-ly_log = /var/log/ly.log
-
 # Main box horizontal margin
 margin_box_h = 2
 
@@ -302,7 +179,7 @@ restart_cmd = /sbin/shutdown -r now
 # Specifies the key used for restart (F1-F12)
 restart_key = F2
 
-# Save the current desktop and login as defaults, and load them on startup
+# Save the current desktop and login as defaults
 save = true
 
 # Service name (set to ly to use the provided pam config file)
@@ -312,15 +189,14 @@ service_name = ly
 # This will contain stdout and stderr of Wayland sessions
 # By default it's saved in the user's home directory
 # Important: due to technical limitations, X11 and shell sessions aren't supported, which
-# means you won't get any logs from those sessions.
+# means you won't get any logs from those sessions
-# If null, no session log will be created
+session_log = ly-session.log
-session_log = .local/state/ly-session.log
 
 # Setup command
 setup_cmd = $CONFIG_DIRECTORY/ly/setup.sh
 
 # Command executed when pressing shutdown_key
-shutdown_cmd = /sbin/shutdown $PLATFORM_SHUTDOWN_ARG now
+shutdown_cmd = /sbin/shutdown -a now
 
 # Specifies the key used for shutdown (F1-F12)
 shutdown_key = F1
@@ -331,13 +207,12 @@ sleep_cmd = null
 # Specifies the key used for sleep (F1-F12)
 sleep_key = F3
 
-# Command executed when starting Ly (before the TTY is taken control of)
-# If null, no command will be executed
-start_cmd = null
-
 # Center the session name.
 text_in_center = false
 
+# TTY in use
+tty = $DEFAULT_TTY
+
 # Default vi mode
 # normal   -> normal mode
 # insert   -> insert mode
@@ -348,7 +223,7 @@ vi_mode = false
 
 # Wayland desktop environments
 # You can specify multiple directories,
-# e.g. $PREFIX_DIRECTORY/share/wayland-sessions:$PREFIX_DIRECTORY/local/share/wayland-sessions
+# e.g. /usr/share/wayland-sessions:/usr/local/share/wayland-sessions
 waylandsessions = $PREFIX_DIRECTORY/share/wayland-sessions
 
 # Xorg server command
@@ -363,5 +238,5 @@ xinitrc = ~/.xinitrc
 
 # Xorg desktop environments
 # You can specify multiple directories,
-# e.g. $PREFIX_DIRECTORY/share/xsessions:$PREFIX_DIRECTORY/local/share/xsessions
+# e.g. /usr/share/xsessions:/usr/local/share/xsessions
 xsessions = $PREFIX_DIRECTORY/share/xsessions

res/custom-sessions/README

@@ -1,23 +0,0 @@
-A custom session is just a desktop entry file, like for X11 and Wayland
-sessions. For example:
-
-[Desktop Entry]
-Name=Fish shell
-Exec=$PREFIX_DIRECTORY/bin/fish
-DesktopNames=null
-Terminal=true
-
-The DesktopNames value is optional and sets the XDG_SESSION_DESKTOP and
-XDG_CURRENT_DESKTOP environment variables. If equal to null or if not present,
-XDG_SESSION_DESKTOP and XDG_CURRENT_DESKTOP will not be set. Otherwise, the
-syntax is the same as described in the Freedesktop Desktop Entry Specification.
-
-The Terminal value specifies if standard output and standard error should be
-redirected to the session log file found in Ly's configuration file. If set to
-true, Ly will consider the program is going to run in a TTY, and thus will not
-redirect standard output & error. It is optional and defaults to false.
-
-Finally, do note that, if the Terminal value is set to true, the
-XDG_SESSION_TYPE environment variable will be set to "tty". Otherwise, it will
-be set to "unspecified" (without quotes), which is behavior that at least
-systemd recognizes (see pam_systemd's man page).

res/lang/ar.ini

@@ -2,26 +2,17 @@ authenticating = جاري المصادقة...
 brightness_down = خفض السطوع
 brightness_up = رفع السطوع
 capslock = capslock
-
 err_alloc = فشل في تخصيص الذاكرة
-
-
 err_bounds = out-of-bounds index
 err_brightness_change = فشل في تغيير سطوع الشاشة
 err_chdir = فشل في فتح مجلد المنزل
-
 err_config = فشل في تفسير ملف الإعدادات
-
+err_console_dev = فشل في الوصول إلى جهاز وحدة التحكم
 err_dgn_oob = رسالة سجل (Log)
 err_domain = اسم نطاق غير صالح
 err_empty_password = لا يُسمح بكلمة مرور فارغة
 err_envlist = فشل في جلب قائمة المتغيرات البيئية
-
-
 err_hostname = فشل في جلب اسم المضيف (Hostname)
-
-
-
 err_mlock = فشل في تأمين ذاكرة كلمة المرور (mlock)
 err_null = مؤشر فارغ (Null pointer)
 err_numlock = فشل في ضبط Num Lock
@@ -47,12 +38,8 @@ err_perm_group = فشل في تخفيض صلاحيات المجموعة (Group p
 err_perm_user = فشل في تخفيض صلاحيات المستخدم (User permissions)
 err_pwnam = فشل في جلب معلومات المستخدم
 err_sleep = فشل في تنفيذ أمر sleep
-
-
-
 err_tty_ctrl = فشل في نقل تحكم الطرفية (TTY)
-
+err_unknown = حدث خطأ غير معروف
-
 err_user_gid = فشل في تعيين معرّف المجموعة (GID) للمستخدم
 err_user_init = فشل في تهيئة بيانات المستخدم
 err_user_uid = فشل في تعيين معرّف المستخدم (UID)
@@ -60,7 +47,6 @@ err_xauth = فشل في تنفيذ أمر xauth
 err_xcb_conn = فشل في الاتصال بمكتبة XCB
 err_xsessions_dir = فشل في العثور على مجلد Xsessions
 err_xsessions_open = فشل في فتح مجلد Xsessions
-
 insert = ادخال
 login = تسجيل الدخول
 logout = تم تسجيل خروجك

res/lang/bg.ini

@@ -1,78 +0,0 @@
-authenticating = удостоверяване...
-brightness_down = намаляване на яркостта
-brightness_up = увеличаване на яркостта
-capslock = caps lock
-custom = персонализирано
-err_alloc = неуспешно заделяне на памет
-err_args = неуспешен анализ на аргументите от командния ред
-err_autologin_session = сесията за автоматично влизане не е намерена
-err_bounds = индексът е извън границите
-err_brightness_change = неуспешна промяна на яркостта
-err_chdir = неуспешно отваряне на домашната папка
-err_clock_too_long = низът на часовника е твърде дълъг
-err_config = неуспешен анализ на конфигурационния файл
-err_crawl = неуспешно обхождане на папките със сесии
-err_dgn_oob = съобщение в дневника
-err_domain = невалиден домейн
-err_empty_password = не е позволена празна парола
-err_envlist = неуспешно получаване на списъка с променливи на средата
-err_get_active_tty = неуспешно откриване на активния TTY
-err_hibernate = неуспешно изпълнение на командата за хибернация
-err_hostname = неуспешно получаване на името на хоста
-err_inactivity = неуспешно изпълнение на командата за неактивност
-err_lock_state = неуспешно получаване на състоянието на заключване
-err_log = неуспешно отваряне на файла с дневника
-err_mlock = неуспешно заключване на паметта за паролата
-err_null = нулев указател
-err_numlock = неуспешно задаване на num lock
-err_pam = неуспешна транзакция
-err_pam_abort = прекратена транзакция
-err_pam_acct_expired = изтекъл профил
-err_pam_auth = грешка при удостоверяването
-err_pam_authinfo_unavail = неуспешно получаване на информация за потребителя
-err_pam_authok_reqd = изтекъл жетон
-err_pam_buf = грешка в буфера на паметта
-err_pam_cred_err = неуспешно задаване на удостоверения
-err_pam_cred_expired = изтекли удостоверения
-err_pam_cred_insufficient = недостатъчни удостоверения
-err_pam_cred_unavail = неуспешно получаване на удостоверения
-err_pam_maxtries = достигнат е максималният лимит на опитите
-err_pam_perm_denied = достъпът е отказан
-err_pam_session = грешка в сесията
-err_pam_sys = системна грешка
-err_pam_user_unknown = непознат потребител
-err_path = неуспешно задаване на пътя
-err_perm_dir = неуспешна смяна на текущата папка
-err_perm_group = неуспешно понижаване на правата на групата
-err_perm_user = неуспешно понижаване на правата на потребителя
-err_pwnam = неуспешно получаване на информация за потребителя
-err_sleep = неуспешно изпълнение на командата за заспиване
-err_start = неуспешно изпълнение на командата за стартиране
-err_battery = неуспешно зареждане на състоянието на батерията
-err_switch_tty = неуспешна смяна на TTY
-err_tty_ctrl = неуспешно прехвърляне на контрола над TTY
-err_no_users = не са намерени потребители
-err_uid_range = неуспешно динамично получаване на UID обхват
-err_user_gid = неуспешно задаване на потребителския GID
-err_user_init = неуспешна стартиране на потребителя
-err_user_uid = неуспешно задаване на потребителския UID
-err_xauth = неуспешна команда xauth
-err_xcb_conn = неуспешна xcb връзка
-err_xsessions_dir = папката със сесии не е намерена
-err_xsessions_open = неуспешно отваряне на папката със сесии
-hibernate = хибернация
-insert = вмъкване
-login = вход
-logout = излизане
-no_x11_support = поддръжката на x11 е изключена при компилирането
-normal = нормално
-numlock = num lock
-other = друго
-password = парола
-restart = рестартиране
-shell = обвивка
-shutdown = изключване
-sleep = заспиване
-wayland = wayland
-x11 = x11
-xinitrc = xinitrc

res/lang/cat.ini

@@ -2,26 +2,17 @@ authenticating = autenticant...
 brightness_down = abaixar brillantor
 brightness_up = apujar brillantor
 capslock = Bloq Majús
-
 err_alloc = assignació de memòria fallida
-
-
 err_bounds = índex fora de límits
 err_brightness_change = error en canviar la brillantor
 err_chdir = error en obrir la carpeta home
 
-
+err_console_dev = error en accedir a la consola
-
 err_dgn_oob = missatge de registre
 err_domain = domini invàlid
 
 err_envlist = error en obtenir l'envlist
-
-
 err_hostname = error en obtenir el nom de l'amfitrió
-
-
-
 err_mlock = error en bloquejar la memòria de clau
 err_null = punter nul
 err_numlock = error en establir el Bloq num
@@ -48,11 +39,7 @@ err_perm_user = error en degradar els permisos de l'usuari
 err_pwnam = error en obtenir la informació de l'usuari
 
 
-
+err_unknown = ha ocorregut un error desconegut
-
-
-
-
 err_user_gid = error en establir el GID de l'usuari
 err_user_init = error en inicialitzar usuari
 err_user_uid = error en establir l'UID de l'usuari
@@ -60,7 +47,6 @@ err_xauth = error en la comanda xauth
 err_xcb_conn = error en la connexió xcb
 err_xsessions_dir = error en trobar la carpeta de sessions
 err_xsessions_open = error en obrir la carpeta de sessions
-
 insert = inserir
 login = iniciar sessió
 logout = sessió tancada

res/lang/cs.ini

@@ -2,26 +2,17 @@
 
 
 capslock = capslock
-
 err_alloc = alokace paměti selhala
-
-
 err_bounds = index je mimo hranice pole
 
 err_chdir = nelze otevřít domovský adresář
 
-
+err_console_dev = chyba při přístupu do konzole
-
 err_dgn_oob = zpráva protokolu
 err_domain = neplatná doména
 
 
-
-
 err_hostname = nelze získat název hostitele
-
-
-
 err_mlock = uzamčení paměti hesel selhalo
 err_null = nulový ukazatel
 
@@ -49,10 +40,6 @@ err_pwnam = nelze získat informace o uživateli
 
 
 
-
-
-
-
 err_user_gid = nastavení GID uživatele selhalo
 err_user_init = inicializace uživatele selhala
 err_user_uid = nastavení UID uživateli selhalo
@@ -61,7 +48,6 @@ err_user_uid = nastavení UID uživateli selhalo
 err_xsessions_dir = nepodařilo se najít složku relací
 err_xsessions_open = nepodařilo se otevřít složku relací
 
-
 login = uživatel
 logout = odhlášen
 

res/lang/de.ini

@@ -1,78 +1,64 @@
-authenticating = authentifizieren...
+
-brightness_down = Helligkeit-
+
-brightness_up = Helligkeit+
+
 capslock = Feststelltaste
-
 err_alloc = Speicherzuweisung fehlgeschlagen
+err_bounds = Listenindex ist außerhalb des Bereichs
+
+err_chdir = Fehler beim oeffnen des home-ordners
+
+err_console_dev = Zugriff auf die Konsole fehlgeschlagen
+err_dgn_oob = Protokoll Nachricht
+err_domain = Unzulaessige domain
 
 
-err_bounds = Index ausserhalb des Bereichs
+err_hostname = Holen des Hostnames fehlgeschlagen
-err_brightness_change = Helligkeitsänderung fehlgeschlagen
+err_mlock = Abschließen des Passwortspeichers fehlgeschlagen
-err_chdir = Fehler beim Oeffnen des Home-Ordners
+err_null = Null Zeiger
 
-err_config = Fehler beim Verarbeiten der Konfigurationsdatei
+err_pam = pam Transaktion fehlgeschlagen
-
+err_pam_abort = pam Transaktion abgebrochen
-err_dgn_oob = Diagnose-Nachricht
-err_domain = Ungueltige Domain
-err_empty_password = Leeres Passwort nicht zugelassen
-err_envlist = Fehler beim Abrufen der Umgebungs-Variablen
-
-
-err_hostname = Abrufen des Hostnames fehlgeschlagen
-
-
-
-err_mlock = Sperren des Passwortspeichers fehlgeschlagen
-err_null = Null Pointer
-err_numlock = Numlock konnte nicht aktiviert werden
-err_pam = PAM-Transaktion fehlgeschlagen
-err_pam_abort = PAM-Transaktion abgebrochen
 err_pam_acct_expired = Benutzerkonto abgelaufen
-err_pam_auth = Authentifizierungsfehler
+err_pam_auth = Authentifizierungs Fehler
-err_pam_authinfo_unavail = Abrufen der Benutzerinformationen fehlgeschlagen
+err_pam_authinfo_unavail = holen der Benutzerinformationen fehlgeschlagen
-err_pam_authok_reqd = Passwort abgelaufen
+err_pam_authok_reqd = Schluessel abgelaufen
 err_pam_buf = Speicherpufferfehler
-err_pam_cred_err = Fehler beim Setzen der Anmeldedaten
+err_pam_cred_err = Fehler beim setzen der Anmeldedaten
 err_pam_cred_expired = Anmeldedaten abgelaufen
 err_pam_cred_insufficient = Anmeldedaten unzureichend
-err_pam_cred_unavail = Fehler beim Abrufen der Anmeldedaten
+err_pam_cred_unavail = Fehler beim holen der Anmeldedaten
-err_pam_maxtries = Maximale Versuchsanzahl erreicht
+err_pam_maxtries = Maximale Versuche erreicht
-err_pam_perm_denied = Zugriff verweigert
+err_pam_perm_denied = Zugriff Verweigert
 err_pam_session = Sitzungsfehler
 err_pam_sys = Systemfehler
 err_pam_user_unknown = Unbekannter Nutzer
-err_path = Fehler beim Setzen des Pfades
+err_path = Fehler beim setzen des Pfades
-err_perm_dir = Ordnerwechsel fehlgeschlagen
+err_perm_dir = Fehler beim wechseln des Ordners
-err_perm_group = Fehler beim Heruntersetzen der Gruppenberechtigungen
+err_perm_group = Fehler beim heruntersetzen der Gruppen Berechtigungen
-err_perm_user = Fehler beim Heruntersetzen der Nutzerberechtigungen
+err_perm_user = Fehler beim heruntersetzen der Nutzer Berechtigungen
-err_pwnam = Abrufen der Benutzerinformationen fehlgeschlagen
+err_pwnam = Holen der Benutzerinformationen fehlgeschlagen
-err_sleep = Sleep-Befehl fehlgeschlagen
 
 
 
-err_tty_ctrl = Fehler bei der TTY-Uebergabe
+err_user_gid = Fehler beim setzen der Gruppen Id des Nutzers
+err_user_init = Initialisierung des Nutzers fehlgeschlagen
+err_user_uid = Setzen der Benutzer Id fehlgeschlagen
 
 
-err_user_gid = Fehler beim Setzen der Gruppen-ID
+err_xsessions_dir = Fehler beim finden des Sitzungsordners
-err_user_init = Nutzer-Initialisierung fehlgeschlagen
+err_xsessions_open = Fehler beim öffnen des Sitzungsordners
-err_user_uid = Setzen der Benutzer-ID fehlgeschlagen
+
-err_xauth = Xauth-Befehl fehlgeschlagen
+login = Anmelden
-err_xcb_conn = xcb-Verbindung fehlgeschlagen
+logout = Abgemeldet
-err_xsessions_dir = Fehler beim Finden des Sitzungsordners
+
-err_xsessions_open = Fehler beim Oeffnen des Sitzungsordners
+
+numlock = Numtaste
 
-insert = Einfügen
-login = Nutzer
-logout = Abmelden
-no_x11_support = X11-Support bei Kompilierung deaktiviert
-normal = Normal
-numlock = Numlock
-other = Andere
 password = Passwort
 restart = Neustarten
-shell = Shell
+shell = shell
 shutdown = Herunterfahren
-sleep = Sleep
+
 wayland = wayland
-x11 = X11
+
 xinitrc = xinitrc

res/lang/en.ini

@@ -2,26 +2,17 @@ authenticating = authenticating...
 brightness_down = decrease brightness
 brightness_up = increase brightness
 capslock = capslock
-custom = custom
 err_alloc = failed memory allocation
-err_args = unable to parse command line arguments
-err_autologin_session = autologin session not found
 err_bounds = out-of-bounds index
 err_brightness_change = failed to change brightness
 err_chdir = failed to open home folder
-err_clock_too_long = clock string too long
 err_config = unable to parse config file
-err_crawl = failed to crawl session directories
+err_console_dev = failed to access console
 err_dgn_oob = log message
 err_domain = invalid domain
 err_empty_password = empty password not allowed
 err_envlist = failed to get envlist
-err_get_active_tty = failed to get active tty
-err_hibernate = failed to execute hibernate command
 err_hostname = failed to get hostname
-err_inactivity = failed to execute inactivity command
-err_lock_state = failed to get lock state
-err_log = failed to open log file
 err_mlock = failed to lock password memory
 err_null = null pointer
 err_numlock = failed to set numlock
@@ -47,12 +38,8 @@ err_perm_group = failed to downgrade group permissions
 err_perm_user = failed to downgrade user permissions
 err_pwnam = failed to get user info
 err_sleep = failed to execute sleep command
-err_start = failed to execute start command
-err_battery = failed to load battery status
-err_switch_tty = failed to switch tty
 err_tty_ctrl = tty control transfer failed
-err_no_users = no users found
+err_unknown = an unknown error occurred
-err_uid_range = failed to dynamically get uid range
 err_user_gid = failed to set user GID
 err_user_init = failed to initialize user
 err_user_uid = failed to set user UID
@@ -60,7 +47,6 @@ err_xauth = xauth command failed
 err_xcb_conn = xcb connection failed
 err_xsessions_dir = failed to find sessions folder
 err_xsessions_open = failed to open sessions folder
-hibernate = hibernate
 insert = insert
 login = login
 logout = logged out

res/lang/es.ini

@@ -2,26 +2,17 @@ authenticating = autenticando...
 brightness_down = bajar brillo
 brightness_up = subir brillo
 capslock = Bloq Mayús
-
 err_alloc = asignación de memoria fallida
-
-
 err_bounds = índice fuera de límites
 
 err_chdir = error al abrir la carpeta home
 
-
+err_console_dev = error al acceder a la consola
-
 err_dgn_oob = mensaje de registro
 err_domain = dominio inválido
 
 
-
-
 err_hostname = error al obtener el nombre de host
-
-
-
 err_mlock = error al bloquear la contraseña de memoria
 err_null = puntero nulo
 
@@ -49,10 +40,6 @@ err_pwnam = error al obtener la información del usuario
 
 
 
-
-
-
-
 err_user_gid = error al establecer el GID del usuario
 err_user_init = error al inicializar usuario
 err_user_uid = error al establecer el UID del usuario
@@ -60,7 +47,6 @@ err_user_uid = error al establecer el UID del usuario
 
 err_xsessions_dir = error al buscar la carpeta de sesiones
 err_xsessions_open = error al abrir la carpeta de sesiones
-
 insert = insertar
 login = usuario
 logout = cerrar sesión

res/lang/fr.ini

@@ -2,26 +2,17 @@ authenticating = authentification...
 brightness_down = diminuer la luminosité
 brightness_up = augmenter la luminosité
 capslock = verr.maj
-custom = customisé
 err_alloc = échec d'allocation mémoire
-err_args = échec de l'analyse des arguments en lignes de commande
-err_autologin_session = session de connexion automatique introuvable
 err_bounds = indice hors-limite
 err_brightness_change = échec du changement de luminosité
 err_chdir = échec de l'ouverture du répertoire home
-err_clock_too_long = chaîne de formattage de l'horloge trop longue
 err_config = échec de lecture du fichier de configuration
-err_crawl = échec de la navigation des répertoires de session
+err_console_dev = échec d'accès à la console
 err_dgn_oob = message
 err_domain = domaine invalide
 err_empty_password = mot de passe vide non autorisé
 err_envlist = échec de lecture de la liste d'environnement
-err_get_active_tty = échec de lecture du terminal actif
-err_hibernate = échec de l'exécution de la commande de veille prolongée
 err_hostname = échec de lecture du nom d'hôte
-err_inactivity = échec de l'exécution de la commande d'inactivité
-err_lock_state = échec de lecture de l'état de verrouillage
-err_log = échec de l'ouverture du fichier de journal
 err_mlock = échec du verrouillage mémoire
 err_null = pointeur null
 err_numlock = échec de modification du verr.num
@@ -47,12 +38,8 @@ err_perm_group = échec du déclassement des permissions de groupe
 err_perm_user = échec du déclassement des permissions utilisateur
 err_pwnam = échec de lecture des infos utilisateur
 err_sleep = échec de l'exécution de la commande de veille
-err_start = échec de l'exécution de la commande de démarrage
-err_battery = échec de lecture de l'état de la batterie
-err_switch_tty = échec du changement de terminal
 err_tty_ctrl = échec du transfert de contrôle du terminal
-err_no_users = aucun utilisateur trouvé
+err_unknown = une erreur inconnue est survenue
-err_uid_range = échec de récupération dynamique de la plage d'UID
 err_user_gid = échec de modification du GID
 err_user_init = échec d'initialisation de l'utilisateur
 err_user_uid = échec de modification du UID
@@ -60,7 +47,6 @@ err_xauth = échec de la commande xauth
 err_xcb_conn = échec de la connexion xcb
 err_xsessions_dir = échec de la recherche du dossier de sessions
 err_xsessions_open = échec de l'ouverture du dossier de sessions
-hibernate = veille prolongée
 insert = insertion
 login = identifiant
 logout = déconnecté

res/lang/it.ini

@@ -2,26 +2,17 @@
 
 
 capslock = capslock
-
 err_alloc = impossibile allocare memoria
-
-
 err_bounds = indice fuori limite
 
 err_chdir = impossibile aprire home directory
 
-
+err_console_dev = impossibile aprire console
-
 err_dgn_oob = messaggio log
 err_domain = dominio non valido
 
 
-
-
 err_hostname = impossibile ottenere hostname
-
-
-
 err_mlock = impossibile ottenere lock per la password in memoria
 err_null = puntatore nullo
 
@@ -49,10 +40,6 @@ err_pwnam = impossibile ottenere dati utente
 
 
 
-
-
-
-
 err_user_gid = impossibile impostare GID utente
 err_user_init = impossibile inizializzare utente
 err_user_uid = impossible impostare UID utente
@@ -61,7 +48,6 @@ err_user_uid = impossible impostare UID utente
 err_xsessions_dir = impossibile localizzare cartella sessioni
 err_xsessions_open = impossibile aprire cartella sessioni
 
-
 login = username
 logout = scollegato
 

res/lang/ja_JP.ini

@@ -1,78 +0,0 @@
-authenticating = 認証中...
-brightness_down = 明るさを下げる
-brightness_up = 明るさを上げる
-capslock = CapsLock
-
-err_alloc = メモリ割り当て失敗
-
-
-err_bounds = 境界外インデックス
-err_brightness_change = 明るさの変更に失敗しました
-err_chdir = ホームフォルダを開けませんでした
-
-err_config = 設定ファイルを解析できません
-
-err_dgn_oob = ログメッセージ
-err_domain = 無効なドメイン
-err_empty_password = 空のパスワードは許可されていません
-err_envlist = 環境変数リストの取得に失敗しました
-
-
-err_hostname = ホスト名の取得に失敗しました
-
-
-
-err_mlock = パスワードメモリのロックに失敗しました
-err_null = ヌルポインタ
-err_numlock = NumLockの設定に失敗しました
-err_pam = PAMトランザクション失敗
-err_pam_abort = PAMトランザクションが中断されました
-err_pam_acct_expired = アカウントの有効期限が切れています
-err_pam_auth = 認証エラー
-err_pam_authinfo_unavail = ユーザー情報の取得に失敗しました
-err_pam_authok_reqd = トークンの有効期限が切れています
-err_pam_buf = メモリバッファエラー
-err_pam_cred_err = 認証情報の設定に失敗しました
-err_pam_cred_expired = 認証情報の有効期限が切れています
-err_pam_cred_insufficient = 認証情報が不十分です
-err_pam_cred_unavail = 認証情報の取得に失敗しました
-err_pam_maxtries = 最大試行回数に到達しました
-err_pam_perm_denied = アクセスが拒否されました
-err_pam_session = セッションエラー
-err_pam_sys = システムエラー
-err_pam_user_unknown = 不明なユーザー
-err_path = パスの設定に失敗しました
-err_perm_dir = カレントディレクトリの変更に失敗しました
-err_perm_group = グループ権限のダウングレードに失敗しました
-err_perm_user = ユーザー権限のダウングレードに失敗しました
-err_pwnam = ユーザー情報の取得に失敗しました
-err_sleep = スリープコマンドの実行に失敗しました
-
-
-
-err_tty_ctrl = TTY制御の転送に失敗しました
-
-
-err_user_gid = ユーザーGIDの設定に失敗しました
-err_user_init = ユーザーの初期化に失敗しました
-err_user_uid = ユーザーUIDの設定に失敗しました
-err_xauth = xauthコマンドの実行に失敗しました
-err_xcb_conn = XCB接続に失敗しました
-err_xsessions_dir = セッションフォルダが見つかりませんでした
-err_xsessions_open = セッションフォルダを開けませんでした
-
-insert = 挿入
-login = ログイン
-logout = ログアウト済み
-no_x11_support = X11サポートはコンパイル時に無効化されています
-normal = 通常
-numlock = NumLock
-other = その他
-password = パスワード
-restart = 再起動
-shell = シェル
-shutdown = シャットダウン
-sleep = スリープ
-wayland = Wayland
-x11 = X11
-xinitrc = xinitrc

res/lang/lv.ini

@@ -1,78 +0,0 @@
-authenticating = autentificējas...
-brightness_down = samazināt spilgtumu
-brightness_up = palielināt spilgtumu
-capslock = caps lock
-custom = pielāgots
-err_alloc = neizdevās atmiņas piešķiršana
-
-
-err_bounds = indekss ārpus robežām
-err_brightness_change = neizdevās mainīt spilgtumu
-err_chdir = neizdevās atvērt mājas mapi
-err_clock_too_long = pulksteņa virkne pārāk gara
-err_config = neizdevās parsēt konfigurācijas failu
-
-err_dgn_oob = žurnāla ziņojums
-err_domain = nederīgs domēns
-err_empty_password = tukša parole nav atļauta
-err_envlist = neizdevās iegūt vides mainīgo sarakstu
-err_get_active_tty = neizdevās iegūt aktīvo tty
-
-err_hostname = neizdevās iegūt hostname
-
-err_lock_state = neizdevās iegūt bloķēšanas stāvokli
-err_log = neizdevās atvērt žurnāla failu
-err_mlock = neizdevās bloķēt paroles atmiņu
-err_null = null rādītājs
-err_numlock = neizdevās iestatīt numlock
-err_pam = pam transakcija neizdevās
-err_pam_abort = pam transakcija pārtraukta
-err_pam_acct_expired = konts novecojis
-err_pam_auth = autentifikācijas kļūda
-err_pam_authinfo_unavail = neizdevās iegūt lietotāja informāciju
-err_pam_authok_reqd = žetons beidzies
-err_pam_buf = atmiņas bufera kļūda
-err_pam_cred_err = neizdevās iestatīt akreditācijas datus
-err_pam_cred_expired = akreditācijas dati novecojuši
-err_pam_cred_insufficient = nepietiekami akreditācijas dati
-err_pam_cred_unavail = neizdevās iegūt akreditācijas datus
-err_pam_maxtries = sasniegts maksimālais mēģinājumu skaits
-err_pam_perm_denied = piekļuve liegta
-err_pam_session = sesijas kļūda
-err_pam_sys = sistēmas kļūda
-err_pam_user_unknown = nezināms lietotājs
-err_path = neizdevās iestatīt ceļu
-err_perm_dir = neizdevās mainīt pašreizējo mapi
-err_perm_group = neizdevās pazemināt grupas atļaujas
-err_perm_user = neizdevās pazemināt lietotāja atļaujas
-err_pwnam = neizdevās iegūt lietotāja informāciju
-err_sleep = neizdevās izpildīt miega komandu
-
-err_battery = neizdevās ielādēt akumulatora stāvokli
-err_switch_tty = neizdevās pārslēgt tty
-err_tty_ctrl = tty vadības nodošana neizdevās
-err_no_users = lietotāji nav atrasti
-
-err_user_gid = neizdevās iestatīt lietotāja GID
-err_user_init = neizdevās inicializēt lietotāju
-err_user_uid = neizdevās iestatīt lietotāja UID
-err_xauth = xauth komanda neizdevās
-err_xcb_conn = xcb savienojums neizdevās
-err_xsessions_dir = neizdevās atrast sesiju mapi
-err_xsessions_open = neizdevās atvērt sesiju mapi
-
-insert = ievietot
-login = lietotājs
-logout = iziet
-no_x11_support = x11 atbalsts atspējots kompilācijas laikā
-normal = parastais
-numlock = numlock
-other = cits
-password = parole
-restart = restartēt
-shell = terminālis
-shutdown = izslēgt
-sleep = snauda
-wayland = wayland
-x11 = x11
-xinitrc = xinitrc

res/lang/pl.ini

@@ -2,26 +2,17 @@ authenticating = uwierzytelnianie...
 brightness_down = zmniejsz jasność
 brightness_up = zwiększ jasność
 capslock = capslock
-custom = własny
 err_alloc = nieudana alokacja pamięci
-
-err_autologin_session = nie znaleziono sesji autologowania
 err_bounds = indeks poza zakresem
 err_brightness_change = nie udało się zmienić jasności
 err_chdir = nie udało się otworzyć folderu domowego
-err_clock_too_long = ciąg znaków zegara jest za długi
 err_config = nie można przetworzyć pliku konfiguracyjnego
-
+err_console_dev = nie udało się uzyskać dostępu do konsoli
 err_dgn_oob = wiadomość loga
 err_domain = niepoprawna domena
 err_empty_password = puste hasło jest niedozwolone
 err_envlist = nie udało się pobrać listy zmiennych środowiskowych
-err_get_active_tty = nie udało się uzyskać aktywnego tty
-
 err_hostname = nie udało się uzyskać nazwy hosta
-
-err_lock_state = nie udało się uzyskać stanu blokady
-err_log = nie udało się otworzyć pliku logu
 err_mlock = nie udało się zablokować pamięci haseł
 err_null = pusty wskaźnik
 err_numlock = nie udało się ustawić numlock
@@ -47,12 +38,8 @@ err_perm_group = nie udało się obniżyć uprawnień grupy
 err_perm_user = nie udało się obniżyć uprawnień użytkownika
 err_pwnam = nie udało się uzyskać informacji o użytkowniku
 err_sleep = nie udało się wykonać polecenia sleep
-
-err_battery = nie udało się sprawdzić statusu baterii
-err_switch_tty = nie można przełączyć tty
 err_tty_ctrl = nie udało się przekazać kontroli tty
-err_no_users = nie znaleziono żadnego użytkownika
+err_unknown = wystąpił nieznany błąd
-
 err_user_gid = nie udało się ustawić GID użytkownika
 err_user_init = nie udało się zainicjalizować użytkownika
 err_user_uid = nie udało się ustawić UID użytkownika
@@ -60,7 +47,6 @@ err_xauth = polecenie xauth nie powiodło się
 err_xcb_conn = połączenie xcb nie powiodło się
 err_xsessions_dir = nie udało się znaleźć folderu sesji
 err_xsessions_open = nie udało się otworzyć folderu sesji
-
 insert = wstaw
 login = login
 logout = wylogowano

res/lang/pt.ini

@@ -2,26 +2,17 @@
 
 
 capslock = capslock
-
 err_alloc = erro na atribuição de memória
-
-
 err_bounds = índice fora de limites
 
 err_chdir = erro ao abrir a pasta home
 
-
+err_console_dev = erro ao aceder à consola
-
 err_dgn_oob = mensagem de registo
 err_domain = domínio inválido
 
 
-
-
 err_hostname = erro ao obter o nome do host
-
-
-
 err_mlock = erro de bloqueio de memória
 err_null = ponteiro nulo
 
@@ -49,10 +40,6 @@ err_pwnam = erro ao obter informação do utilizador
 
 
 
-
-
-
-
 err_user_gid = erro ao definir o GID do utilizador
 err_user_init = erro ao iniciar o utilizador
 err_user_uid = erro ao definir o UID do utilizador
@@ -61,7 +48,6 @@ err_user_uid = erro ao definir o UID do utilizador
 err_xsessions_dir = erro ao localizar a pasta das sessões
 err_xsessions_open = erro ao abrir a pasta das sessões
 
-
 login = iniciar sessão
 logout = terminar sessão
 

res/lang/pt_BR.ini

@@ -2,26 +2,17 @@
 
 
 capslock = caixa alta
-
 err_alloc = alocação de memória malsucedida
-
-
 err_bounds = índice fora de limites
 
 err_chdir = não foi possível abrir o diretório home
 
-
+err_console_dev = não foi possível acessar o console
-
 err_dgn_oob = mensagem de log
 err_domain = domínio inválido
 
 
-
-
 err_hostname = não foi possível obter o nome do host
-
-
-
 err_mlock = bloqueio da memória de senha malsucedido
 err_null = ponteiro nulo
 
@@ -49,10 +40,6 @@ err_pwnam = não foi possível obter informações do usuário
 
 
 
-
-
-
-
 err_user_gid = não foi possível definir o GID do usuário
 err_user_init = não foi possível iniciar o usuário
 err_user_uid = não foi possível definir o UID do usuário
@@ -61,7 +48,6 @@ err_user_uid = não foi possível definir o UID do usuário
 err_xsessions_dir = não foi possível encontrar a pasta das sessões
 err_xsessions_open = não foi possível abrir a pasta das sessões
 
-
 login = conectar
 logout = desconectado
 

res/lang/ro.ini

@@ -7,16 +7,7 @@ capslock = capslock
 
 
 
-
+err_console_dev = nu s-a putut accesa consola
-
-
-
-
-
-
-
-
-
 
 
 
@@ -57,11 +48,6 @@ err_perm_user = nu s-a putut face downgrade permisiunilor de utilizator
 
 
 
-
-
-
-
-
 login = utilizator
 logout = opreşte sesiunea
 

res/lang/ru.ini

@@ -1,30 +1,21 @@
-authenticating = аутентификация...
+
-brightness_down = уменьшить яркость
+
-brightness_up = увеличить яркость
+
 capslock = capslock
-custom = пользовательский
 err_alloc = не удалось выделить память
-
-err_autologin_session = не найдена сессия с автологином
 err_bounds = за пределами индекса
-err_brightness_change = не удалось изменить яркость
-err_chdir = не удалось открыть домашнюю папку
-err_clock_too_long = строка часов слишком длинная
-err_config = не удалось разобрать файл конфигурации
 
+err_chdir = не удалось открыть домашнюю папку
+
+err_console_dev = не удалось получить доступ к консоли
 err_dgn_oob = отладочное сообщение (log)
 err_domain = неверный домен
-err_empty_password = пустой пароль не допустим
+
-err_envlist = не удалось получить список переменных среды
-err_get_active_tty = не удалось получить активный tty
 
 err_hostname = не удалось получить имя хоста
-
-err_lock_state = не удалось получить состояние lock
-err_log = не удалось открыть файл log
 err_mlock = сбой блокировки памяти
 err_null = нулевой указатель
-err_numlock = не удалось установить numlock
+
 err_pam = pam транзакция не удалась
 err_pam_abort = pam транзакция прервана
 err_pam_acct_expired = срок действия аккаунта истёк
@@ -46,33 +37,28 @@ err_perm_dir = не удалось изменить текущий катало
 err_perm_group = не удалось понизить права доступа группы
 err_perm_user = не удалось понизить права доступа пользователя
 err_pwnam = не удалось получить информацию о пользователе
-err_sleep = не удалось выполнить команду sleep
 
-err_battery = не удалось получить статус батареи
+
-err_switch_tty = не удалось переключить tty
-err_tty_ctrl = передача управления tty не удалась
-err_no_users = пользователи не найдены
 
 err_user_gid = не удалось установить GID пользователя
 err_user_init = не удалось инициализировать пользователя
 err_user_uid = не удалось установить UID пользователя
-err_xauth = команда xauth не выполнена
+
-err_xcb_conn = ошибка подключения xcb
+
 err_xsessions_dir = не удалось найти сессионную папку
 err_xsessions_open = не удалось открыть сессионную папку
 
-insert = вставка
 login = логин
-logout = вышел из системы
+logout = logged out
-no_x11_support = поддержка x11 отключена во время компиляции
+
-normal = обычный
+
 numlock = numlock
-other = прочие
+
 password = пароль
 restart = перезагрузить
-shell = оболочка
+shell = shell
 shutdown = выключить
-sleep = сон
+
 wayland = wayland
-x11 = x11
+
 xinitrc = xinitrc

res/lang/sr.ini

@@ -2,26 +2,17 @@
 
 
 capslock = capslock
-
 err_alloc = neuspijesna alokacija memorije
-
-
 err_bounds = izvan granica indeksa
 
 err_chdir = neuspijesno otvaranje home foldera
 
-
+err_console_dev = neuspijesno pristupanje konzoli
-
 err_dgn_oob = log poruka
 err_domain = nevazeci domen
 
 
-
-
 err_hostname = neuspijesno trazenje hostname-a
-
-
-
 err_mlock = neuspijesno zakljucavanje memorije lozinke
 err_null = null pokazivac
 
@@ -49,10 +40,6 @@ err_pwnam = neuspijesno skupljanje informacija o korisniku
 
 
 
-
-
-
-
 err_user_gid = neuspijesno postavljanje korisničkog GID-a
 err_user_init = neuspijensa inicijalizacija korisnika
 err_user_uid = neuspijesno postavljanje UID-a korisnika
@@ -61,7 +48,6 @@ err_user_uid = neuspijesno postavljanje UID-a korisnika
 err_xsessions_dir = neuspijesno pronalazenje foldera sesija
 err_xsessions_open = neuspijesno otvaranje foldera sesija
 
-
 login = korisnik
 logout = izlogovan
 

res/lang/sv.ini

@@ -2,26 +2,17 @@
 
 
 capslock = capslock
-
 err_alloc = misslyckad minnesallokering
-
-
 err_bounds = utanför banan index
 
 err_chdir = misslyckades att öppna hemkatalog
 
-
+err_console_dev = misslyckades att komma åt konsol
-
 err_dgn_oob = loggmeddelande
 err_domain = okänd domän
 
 
-
-
 err_hostname = misslyckades att hämta värdnamn
-
-
-
 err_mlock = misslyckades att låsa lösenordsminne
 err_null = nullpekare
 
@@ -49,10 +40,6 @@ err_pwnam = misslyckades att hämta användarinfo
 
 
 
-
-
-
-
 err_user_gid = misslyckades att ställa in användar-GID
 err_user_init = misslyckades att initialisera användaren
 err_user_uid = misslyckades att ställa in användar-UID
@@ -61,7 +48,6 @@ err_user_uid = misslyckades att ställa in användar-UID
 err_xsessions_dir = misslyckades att hitta sessionskatalog
 err_xsessions_open = misslyckades att öppna sessionskatalog
 
-
 login = inloggning
 logout = utloggad
 

res/lang/tr.ini

@@ -2,26 +2,17 @@
 
 
 capslock = capslock
-
 err_alloc = basarisiz bellek ayirma
-
-
 err_bounds = sinirlarin disinda dizin
 
 err_chdir = ev klasoru acilamadi
 
-
+err_console_dev = konsola erisilemedi
-
 err_dgn_oob = log mesaji
 err_domain = gecersiz etki alani
 
 
-
-
 err_hostname = ana bilgisayar adi alinamadi
-
-
-
 err_mlock = parola bellegi kilitlenemedi
 err_null = bos isaretci hatasi
 
@@ -49,10 +40,6 @@ err_pwnam = kullanici bilgileri alinamadi
 
 
 
-
-
-
-
 err_user_gid = kullanici icin GID ayarlanamadi
 err_user_init = kullanici oturumu baslatilamadi
 err_user_uid = kullanici icin UID ayarlanamadi
@@ -61,7 +48,6 @@ err_user_uid = kullanici icin UID ayarlanamadi
 err_xsessions_dir = oturumlar klasoru bulunamadi
 err_xsessions_open = oturumlar klasoru acilamadi
 
-
 login = kullanici
 logout = oturumdan cikis yapildi
 

res/lang/uk.ini

@@ -2,26 +2,17 @@
 
 
 capslock = capslock
-
 err_alloc = невдале виділення пам'яті
-
-
 err_bounds = поза межами індексу
 
 err_chdir = не вдалося відкрити домашній каталог
 
-
+err_console_dev = невдалий доступ до консолі
-
 err_dgn_oob = повідомлення журналу (log)
 err_domain = недійсний домен
 
 
-
-
 err_hostname = не вдалося отримати ім'я хосту
-
-
-
 err_mlock = збій блокування пам'яті
 err_null = нульовий вказівник
 
@@ -49,10 +40,6 @@ err_pwnam = не вдалося отримати дані користувача
 
 
 
-
-
-
-
 err_user_gid = не вдалося змінити GID користувача
 err_user_init = не вдалося ініціалізувати користувача
 err_user_uid = не вдалося змінити UID користувача
@@ -61,7 +48,6 @@ err_user_uid = не вдалося змінити UID користувача
 err_xsessions_dir = не вдалося знайти каталог сесій
 err_xsessions_open = не вдалося відкрити каталог сесій
 
-
 login = логін
 logout = вийти
 

res/lang/zh_CN.ini

@@ -2,26 +2,17 @@
 
 
 capslock = 大写锁定
-
 err_alloc = 内存分配失败
-
-
 err_bounds = 索引越界
 
 err_chdir = 无法打开home文件夹
 
-
+err_console_dev = 无法访问控制台
-
 err_dgn_oob = 日志消息
 err_domain = 无效的域
 
 
-
-
 err_hostname = 获取主机名失败
-
-
-
 err_mlock = 锁定密码存储器失败
 err_null = 空指针
 
@@ -49,10 +40,6 @@ err_pwnam = 获取用户信息失败
 
 
 
-
-
-
-
 err_user_gid = 设置用户GID失败
 err_user_init = 初始化用户失败
 err_user_uid = 设置用户UID失败
@@ -61,7 +48,6 @@ err_user_uid = 设置用户UID失败
 err_xsessions_dir = 找不到会话文件夹
 err_xsessions_open = 无法打开会话文件夹
 
-
 login = 登录
 logout = 注销
 

res/ly-dinit

@@ -1,8 +1,8 @@
 type            = process
 restart         = true
 smooth-recovery = true
-command         = $PREFIX_DIRECTORY/bin/$EXECUTABLE_NAME
+command         = $PREFIX_DIRECTORY/bin/$EXE_NAME
-depends-on      = login.target
+depends-on      = loginready
 termsignal      = HUP
-# ly needs access to the console while login.target already occupies it
+# ly needs access to the console while loginready already occupies it
 options         = shares-console

res/ly-freebsd-wrapper

@@ -1,7 +0,0 @@
-#!/bin/sh
-
-# On FreeBSD, even if we override the default login program, getty will still
-# try to append "login -fp root" as arguments to Ly, which is not supported.
-# To avoid this, we use a wrapper script that ignores these arguments before
-# actually executing Ly.
-exec $PREFIX_DIRECTORY/bin/$EXECUTABLE_NAME

res/ly-openrc

@@ -19,8 +19,12 @@ then
     commandUL="/sbin/agetty"
 fi
 
+## Get the tty from the conf file
+CONFTTY=$(cat $CONFIG_DIRECTORY/ly/config.ini | sed -n 's/^tty.*=[^1-9]*// p')
+
 ## The execution vars
-TTY="tty$DEFAULT_TTY"
+# If CONFTTY is empty then default to $DEFAULT_TTY
+TTY="tty${CONFTTY:-$DEFAULT_TTY}"
 TERM=linux
 BAUD=38400
 # If we don't have getty then we should have agetty

res/ly-runit-service/conf

@@ -7,4 +7,6 @@ fi
 
 BAUD_RATE=38400
 TERM_NAME=linux
-TTY=tty$DEFAULT_TTY
+
+auxtty=$(/bin/cat $CONFIG_DIRECTORY/ly/config.ini 2>/dev/null 1| /bin/sed -n 's/\(^[[:space:]]*tty[[:space:]]*=[[:space:]]*\)\([[:digit:]][[:digit:]]*\)\(.*\)/\2/p')
+TTY=tty${auxtty:-$DEFAULT_TTY}

res/ly-s6/run

@@ -1,2 +1,2 @@
 #!/bin/execlineb -P
-exec agetty -L -8 -n -l $PREFIX_DIRECTORY/bin/$EXECUTABLE_NAME tty$DEFAULT_TTY 115200
+exec agetty -L -8 -n -l $PREFIX_DIRECTORY/bin/$EXE_NAME tty$DEFAULT_TTY 115200

res/ly-sysvinit

@@ -1,65 +0,0 @@
-#!/bin/sh
-### BEGIN INIT INFO
-# Provides:          ly
-# Required-Start:    $remote_fs $syslog
-# Required-Stop:     $remote_fs $syslog
-# Default-Start:     2 3 4 5
-# Default-Stop:      0 1 6
-# Short-Description: Ly display manager
-# Description:       Starts and stops the Ly display manager
-### END INIT INFO
-#
-# Author:       AnErrupTion <anerruption@disroot.org>
-#
-
-PATH=/sbin:/usr/sbin:/bin:/usr/bin
-DAEMON=/usr/bin/ly
-TTY=/dev/tty$DEFAULT_TTY
-PIDFILE=/var/run/ly.pid
-NAME=ly
-DESC="Ly display manager"
-
-. /lib/lsb/init-functions
-
-case "$1" in
-  start)
-    log_daemon_msg "Starting $DESC on $TTY..."
-    if [ -f "$PIDFILE" ]; then
-        log_progress_msg "$DESC is already running"
-        log_end_msg 0
-        return 0
-    fi
-
-    # Ensure TTY exists
-    [ -c "$TTY" ] || {
-        log_failure_msg "$TTY does not exist"
-        return 1
-    }
-
-    start-stop-daemon --start --background --make-pidfile --pidfile $PIDFILE \
-      --chdir / --exec /bin/sh -- -c "exec setsid sh -c 'exec <$TTY >$TTY 2>&1 $DAEMON'"
-    log_end_msg $?
-    ;;
-  stop)
-    log_daemon_msg "Stopping $DESC..."
-    start-stop-daemon --stop --pidfile $PIDFILE --retry 5
-    RETVAL=$?
-    [ $RETVAL -eq 0 ] && rm -f "$PIDFILE"
-    log_end_msg $RETVAL
-    ;;
-  restart)
-    echo "Restarting $DESC..."
-    $0 stop
-    sleep 1
-    $0 start
-    ;;
-  status)
-    status_of_proc -p $PIDFILE $DAEMON $NAME && exit 0 || exit $?
-    ;;
-  *)
-    echo "Usage: /etc/init.d/$NAME {start|stop|restart|status}"
-    exit 1
-    ;;
-esac
-
-exit 0

res/ly.service

@@ -1,16 +1,16 @@
 [Unit]
 Description=TUI display manager
 After=systemd-user-sessions.service plymouth-quit-wait.service
-After=getty@%I.service
+After=getty@tty$DEFAULT_TTY.service
-Conflicts=getty@%I.service
+Conflicts=getty@tty$DEFAULT_TTY.service
 
 [Service]
 Type=idle
 ExecStart=$PREFIX_DIRECTORY/bin/$EXECUTABLE_NAME
 StandardInput=tty
-TTYPath=/dev/%I
+TTYPath=/dev/tty$DEFAULT_TTY
 TTYReset=yes
 TTYVHangup=yes
 
 [Install]
-WantedBy=multi-user.target
+Alias=display-manager.service

res/pam.d/ly-freebsd

@@ -1,8 +0,0 @@
-#%PAM-1.0
-
-# OpenPAM (used in FreeBSD) doesn't support prepending "-" for ignoring missing
-# modules.
-auth       include      login
-account    include      login
-password   include      login
-session    include      login

res/pam.d/ly-freebsd-autologin

@@ -1,9 +0,0 @@
-#%PAM-1.0
-
-# OpenPAM (used in FreeBSD) doesn't support prepending "-" for ignoring missing
-# modules.
-auth       required     pam_permit.so
-auth       include      login
-account    include      login
-password   include      login
-session    include      login

res/pam.d/ly-linux-autologin

@@ -1,16 +0,0 @@
-#%PAM-1.0
-
-auth       required     pam_permit.so
--auth      optional     pam_gnome_keyring.so
--auth      optional     pam_kwallet5.so
-
-account    include      login
-
-password   include      login
--password  optional     pam_gnome_keyring.so use_authtok
-
--session   optional     pam_systemd.so       class=greeter
--session   optional     pam_elogind.so
-session    include      login
--session   optional     pam_gnome_keyring.so auto_start
--session   optional     pam_kwallet5.so      auto_start

src/Environment.zig

@@ -6,19 +6,16 @@ const Ini = ini.Ini;
 
 pub const DesktopEntry = struct {
     Exec: []const u8 = "",
-    Name: []const u8 = "",
+    Name: [:0]const u8 = "",
-    DesktopNames: ?[]u8 = null,
+    DesktopNames: ?[:0]u8 = null,
-    Terminal: ?bool = null,
 };
 
 pub const Entry = struct { @"Desktop Entry": DesktopEntry = .{} };
 
 entry_ini: ?Ini(Entry) = null,
-name: []const u8 = "",
+name: [:0]const u8 = "",
-xdg_session_desktop: ?[]const u8 = null,
+xdg_session_desktop: ?[:0]const u8 = null,
-xdg_session_desktop_owned: bool = false,
+xdg_desktop_names: ?[:0]const u8 = null,
-xdg_desktop_names: ?[]const u8 = null,
+cmd: []const u8 = "",
-cmd: ?[]const u8 = null,
 specifier: []const u8 = "",
 display_server: DisplayServer = .wayland,
-is_terminal: bool = false,

src/LogFile.zig

@@ -1,51 +0,0 @@
-const std = @import("std");
-
-const LogFile = @This();
-
-path: []const u8,
-could_open_log_file: bool = undefined,
-file: std.fs.File = undefined,
-buffer: []u8,
-file_writer: std.fs.File.Writer = undefined,
-
-pub fn init(path: []const u8, buffer: []u8) !LogFile {
-    var log_file = LogFile{ .path = path, .buffer = buffer };
-    log_file.could_open_log_file = try openLogFile(path, &log_file);
-    return log_file;
-}
-
-pub fn reinit(self: *LogFile) !void {
-    self.could_open_log_file = try openLogFile(self.path, self);
-}
-
-pub fn deinit(self: *LogFile) void {
-    self.file_writer.interface.flush() catch {};
-    self.file.close();
-}
-
-fn openLogFile(path: []const u8, log_file: *LogFile) !bool {
-    var could_open_log_file = true;
-    open_log_file: {
-        log_file.file = std.fs.cwd().openFile(path, .{ .mode = .write_only }) catch std.fs.cwd().createFile(path, .{ .mode = 0o666 }) catch {
-            // If we could neither open an existing log file nor create a new
-            // one, abort.
-            could_open_log_file = false;
-            break :open_log_file;
-        };
-    }
-
-    if (!could_open_log_file) {
-        log_file.file = try std.fs.openFileAbsolute("/dev/null", .{ .mode = .write_only });
-    }
-
-    var log_file_writer = log_file.file.writer(log_file.buffer);
-
-    // Seek to the end of the log file
-    if (could_open_log_file) {
-        const stat = try log_file.file.stat();
-        try log_file_writer.seekTo(stat.size);
-    }
-
-    log_file.file_writer = log_file_writer;
-    return could_open_log_file;
-}

src/UidRange.zig

@@ -1,6 +0,0 @@
-const std = @import("std");
-
-// We set both values to 0 by default so that, in case they aren't present in
-// the login.defs for some reason, then only the root username will be shown
-uid_min: std.posix.uid_t = 0,
-uid_max: std.posix.uid_t = 0,

src/animations/Doom.zig

@@ -7,27 +7,26 @@ const TerminalBuffer = @import("../tui/TerminalBuffer.zig");
 const Doom = @This();
 
 pub const STEPS = 12;
-pub const HEIGHT_MAX = 9;
-pub const SPREAD_MAX = 4;
 
 allocator: Allocator,
 terminal_buffer: *TerminalBuffer,
 buffer: []u8,
-height: u8,
-spread: u8,
 fire: [STEPS + 1]Cell,
 
-pub fn init(allocator: Allocator, terminal_buffer: *TerminalBuffer, top_color: u32, middle_color: u32, bottom_color: u32, fire_height: u8, fire_spread: u8) !Doom {
+pub fn init(allocator: Allocator, terminal_buffer: *TerminalBuffer, top_color: u32, middle_color: u32, bottom_color: u32) !Doom {
     const buffer = try allocator.alloc(u8, terminal_buffer.width * terminal_buffer.height);
     initBuffer(buffer, terminal_buffer.width);
 
-    const levels =
+    return .{
-        [_]Cell{
+        .allocator = allocator,
-            Cell.init(' ', terminal_buffer.bg, terminal_buffer.bg),
+        .terminal_buffer = terminal_buffer,
-            Cell.init(0x2591, top_color, terminal_buffer.bg),
+        .buffer = buffer,
-            Cell.init(0x2592, top_color, terminal_buffer.bg),
+        .fire = [_]Cell{
-            Cell.init(0x2593, top_color, terminal_buffer.bg),
+            Cell.init(' ', TerminalBuffer.Color.DEFAULT, TerminalBuffer.Color.DEFAULT),
-            Cell.init(0x2588, top_color, terminal_buffer.bg),
+            Cell.init(0x2591, top_color, TerminalBuffer.Color.DEFAULT),
+            Cell.init(0x2592, top_color, TerminalBuffer.Color.DEFAULT),
+            Cell.init(0x2593, top_color, TerminalBuffer.Color.DEFAULT),
+            Cell.init(0x2588, top_color, TerminalBuffer.Color.DEFAULT),
             Cell.init(0x2591, middle_color, top_color),
             Cell.init(0x2592, middle_color, top_color),
             Cell.init(0x2593, middle_color, top_color),
@@ -36,15 +35,7 @@ pub fn init(allocator: Allocator, terminal_buffer: *TerminalBuffer, top_color: u
             Cell.init(0x2592, bottom_color, middle_color),
             Cell.init(0x2593, bottom_color, middle_color),
             Cell.init(0x2588, bottom_color, middle_color),
-        };
+        },
-
-    return .{
-        .allocator = allocator,
-        .terminal_buffer = terminal_buffer,
-        .buffer = buffer,
-        .height = @min(HEIGHT_MAX, fire_height),
-        .spread = @min(SPREAD_MAX, fire_spread),
-        .fire = levels,
     };
 }
 
@@ -66,35 +57,20 @@ fn draw(self: *Doom) void {
     for (0..self.terminal_buffer.width) |x| {
         // We start from 1 so that we always have the topmost line when spreading fire
         for (1..self.terminal_buffer.height) |y| {
-            // Get index of current cell in fire level buffer
+            // Get current cell
             const from = y * self.terminal_buffer.width + x;
+            const cell_index = self.buffer[from];
 
-            // Generate random data for fire propagation
+            // Spread fire
-            const rand_loss = self.terminal_buffer.random.intRangeAtMost(u8, 0, HEIGHT_MAX);
+            const propagate = self.terminal_buffer.random.int(u1);
-            const rand_spread = self.terminal_buffer.random.intRangeAtMost(u8, 0, self.spread * 2);
+            const to = from - self.terminal_buffer.width; // Get the line above
 
-            // Select semi-random target cell
+            self.buffer[to] = if (cell_index > 0) cell_index - propagate else cell_index;
-            const to = from -| self.terminal_buffer.width + self.spread -| rand_spread;
-            const to_x = to % self.terminal_buffer.width;
-            const to_y = to / self.terminal_buffer.width;
 
-            // Get fire level of current cell
+            // Put the cell
-            const level_buf_from = self.buffer[from];
+            const cell = self.fire[cell_index];
-
+            cell.put(x, y);
-            // Choose new fire level and store in level buffer
-            const level_buf_to = level_buf_from -| @intFromBool(rand_loss >= self.height);
-            self.buffer[to] = level_buf_to;
-
-            // Send known fire levels to terminal buffer
-            const from_cell = self.fire[level_buf_from];
-            const to_cell = self.fire[level_buf_to];
-            from_cell.put(x, y);
-            to_cell.put(to_x, to_y);
         }
-
-        // Draw bottom line (fire source)
-        const src_cell = self.fire[STEPS];
-        src_cell.put(x, self.terminal_buffer.height - 1);
     }
 }
 

src/animations/DurFile.zig

@@ -1,408 +0,0 @@
-const std = @import("std");
-const Animation = @import("../tui/Animation.zig");
-const Cell = @import("../tui/Cell.zig");
-const TerminalBuffer = @import("../tui/TerminalBuffer.zig");
-const Color = TerminalBuffer.Color;
-const Styling = TerminalBuffer.Styling;
-const Allocator = std.mem.Allocator;
-const Json = std.json;
-const eql = std.mem.eql;
-const flate = std.compress.flate;
-
-fn read_decompress_file(allocator: Allocator, file_path: []const u8) ![]u8 {
-    const file_buffer = std.fs.cwd().openFile(file_path, .{}) catch {
-        return error.FileNotFound;
-    };
-    defer file_buffer.close();
-
-    var file_reader_buffer: [4096]u8 = undefined;
-    var decompress_buffer: [flate.max_window_len]u8 = undefined;
-
-    var file_reader = file_buffer.reader(&file_reader_buffer);
-    var decompress: flate.Decompress = .init(&file_reader.interface, .gzip, &decompress_buffer);
-
-    const file_decompressed = decompress.reader.allocRemaining(allocator, .unlimited) catch {
-        return error.NotValidFile;
-    };
-
-    return file_decompressed;
-}
-
-const Frame = struct {
-    frameNumber: i32,
-    delay: f32,
-    contents: [][]u8,
-    colorMap: [][][]i32,
-
-    // allocator must be outside of struct as it will fail the json parser
-    pub fn deinit(self: *const Frame, allocator: Allocator) void {
-        for (self.contents) |con| {
-            allocator.free(con);
-        }
-        allocator.free(self.contents);
-
-        for (self.colorMap) |cm| {
-            for (cm) |int2| {
-                allocator.free(int2);
-            }
-            allocator.free(cm);
-        }
-        allocator.free(self.colorMap);
-    }
-};
-
-// https://github.com/cmang/durdraw/blob/0.29.0/durformat.md
-const DurFormat = struct {
-    allocator: Allocator,
-    formatVersion: ?i64 = null,
-    colorFormat: ?[]const u8 = null,
-    encoding: ?[]const u8 = null,
-    framerate: ?f64 = null,
-    columns: ?i64 = null,
-    lines: ?i64 = null,
-    frames: std.ArrayList(Frame) = undefined,
-
-    pub fn valid(self: *DurFormat) bool {
-        if (self.formatVersion != null and
-            self.colorFormat != null and
-            self.encoding != null and
-            self.framerate != null and
-            self.columns != null and
-            self.lines != null and
-            self.frames.items.len >= 1)
-        {
-            // v8 may have breaking changes like changing the colormap xy direction
-            // (https://github.com/cmang/durdraw/issues/24)
-            if (self.formatVersion.? != 7) return false;
-
-            // Code currently only supports 16 and 256 color format only
-            if (!(eql(u8, "16", self.colorFormat.?) or eql(u8, "256", self.colorFormat.?)))
-                return false;
-
-            // Code currently supports only utf-8 encoding
-            if (!eql(u8, self.encoding.?, "utf-8")) return false;
-
-            // Sanity check on file
-            if (self.columns.? <= 0) return false;
-            if (self.lines.? <= 0) return false;
-            if (self.framerate.? < 0) return false;
-
-            return true;
-        }
-
-        return false;
-    }
-
-    fn parse_dur_from_json(self: *DurFormat, allocator: Allocator, dur_json_root: Json.Value) !void {
-        var dur_movie = if (dur_json_root.object.get("DurMovie")) |dm| dm.object else return error.NotValidFile;
-
-        // Depending on the version, a dur file can have different json object names (ie: columns vs sizeX)
-        self.formatVersion = if (dur_movie.get("formatVersion")) |x| x.integer else null;
-        self.colorFormat = if (dur_movie.get("colorFormat")) |x| try allocator.dupe(u8, x.string) else null;
-        self.encoding = if (dur_movie.get("encoding")) |x| try allocator.dupe(u8, x.string) else null;
-        self.framerate = if (dur_movie.get("framerate")) |x| x.float else null;
-        self.columns = if (dur_movie.get("columns")) |x| x.integer else if (dur_movie.get("sizeX")) |x| x.integer else null;
-
-        self.lines = if (dur_movie.get("lines")) |x| x.integer else if (dur_movie.get("sizeY")) |x| x.integer else null;
-
-        const frames = dur_movie.get("frames") orelse return error.NotValidFile;
-
-        self.frames = try .initCapacity(allocator, frames.array.items.len);
-
-        for (frames.array.items) |json_frame| {
-            var parsed_frame = try Json.parseFromValue(Frame, allocator, json_frame, .{});
-            defer parsed_frame.deinit();
-
-            const frame_val = parsed_frame.value;
-
-            // copy all fields to own the ptrs for deallocation, the parsed_frame has some other
-            // allocated memory making it difficult to deallocate without leaks
-            const frame: Frame = .{ .frameNumber = frame_val.frameNumber, .delay = frame_val.delay, .contents = try allocator.alloc([]u8, frame_val.contents.len), .colorMap = try allocator.alloc([][]i32, frame_val.colorMap.len) };
-
-            for (0..frame.contents.len) |i| {
-                frame.contents[i] = try allocator.dupe(u8, frame_val.contents[i]);
-            }
-
-            // colorMap is stored as an 3d array where:
-            // the outer (i) most array is the horizontal position of the color
-            // the middle (j) is the vertical position of the color
-            // the inner (0/1) is the foreground/background color
-            for (0..frame.colorMap.len) |i| {
-                frame.colorMap[i] = try allocator.alloc([]i32, frame_val.colorMap[i].len);
-                for (0..frame.colorMap[i].len) |j| {
-                    frame.colorMap[i][j] = try allocator.alloc(i32, 2);
-                    frame.colorMap[i][j][0] = frame_val.colorMap[i][j][0];
-                    frame.colorMap[i][j][1] = frame_val.colorMap[i][j][1];
-                }
-            }
-
-            try self.frames.append(allocator, frame);
-        }
-    }
-
-    pub fn create_from_file(self: *DurFormat, allocator: Allocator, file_path: []const u8) !void {
-        const file_decompressed = try read_decompress_file(allocator, file_path);
-        defer allocator.free(file_decompressed);
-
-        const parsed = try Json.parseFromSlice(Json.Value, allocator, file_decompressed, .{});
-        defer parsed.deinit();
-
-        try parse_dur_from_json(self, allocator, parsed.value);
-
-        if (!self.valid()) {
-            return error.NotValidFile;
-        }
-    }
-
-    pub fn init(allocator: Allocator) DurFormat {
-        return .{ .allocator = allocator };
-    }
-
-    pub fn deinit(self: *DurFormat) void {
-        if (self.colorFormat) |str| self.allocator.free(str);
-        if (self.encoding) |str| self.allocator.free(str);
-
-        for (self.frames.items) |frame| {
-            frame.deinit(self.allocator);
-        }
-        self.frames.deinit(self.allocator);
-    }
-};
-
-const tb_color_16 = [16]u32{
-    Color.ECOL_BLACK,
-    Color.ECOL_RED,
-    Color.ECOL_GREEN,
-    Color.ECOL_YELLOW,
-    Color.ECOL_BLUE,
-    Color.ECOL_MAGENTA,
-    Color.ECOL_CYAN,
-    Color.ECOL_WHITE,
-    Color.ECOL_BLACK | Styling.BOLD,
-    Color.ECOL_RED | Styling.BOLD,
-    Color.ECOL_GREEN | Styling.BOLD,
-    Color.ECOL_YELLOW | Styling.BOLD,
-    Color.ECOL_BLUE | Styling.BOLD,
-    Color.ECOL_MAGENTA | Styling.BOLD,
-    Color.ECOL_CYAN | Styling.BOLD,
-    Color.ECOL_WHITE | Styling.BOLD,
-};
-
-// Using bold for bright colors allows for all 16 colors to be rendered on tty term
-const rgb_color_16 = [16]u32{
-    Color.DEFAULT, // DEFAULT instead of TRUE_BLACK to not break compositors (the latter ignores transparency)
-    Color.TRUE_DIM_RED,
-    Color.TRUE_DIM_GREEN,
-    Color.TRUE_DIM_YELLOW,
-    Color.TRUE_DIM_BLUE,
-    Color.TRUE_DIM_MAGENTA,
-    Color.TRUE_DIM_CYAN,
-    Color.TRUE_DIM_WHITE,
-    Color.DEFAULT | Styling.BOLD,
-    Color.TRUE_RED | Styling.BOLD,
-    Color.TRUE_GREEN | Styling.BOLD,
-    Color.TRUE_YELLOW | Styling.BOLD,
-    Color.TRUE_BLUE | Styling.BOLD,
-    Color.TRUE_MAGENTA | Styling.BOLD,
-    Color.TRUE_CYAN | Styling.BOLD,
-    Color.TRUE_WHITE | Styling.BOLD,
-};
-
-// Made this table from looking at colormapping in dur source, not sure whats going on with the mapping logic
-// Array indexes are dur colormappings which value maps to indexes in table above. Only needed for dur 16 color
-const durcolor_table_to_color16 = [17]u32{
-    0, // 0 black
-    0, // 1 nothing?? dur source did not say why 1 is unused
-    4, // 2 blue
-    2, // 3 green
-    6, // 4 cyan
-    1, // 5 red
-    5, // 6 magenta
-    3, // 7 yellow
-    7, // 8 light gray
-    8, // 9 gray
-    12, // 10 bright blue
-    10, // 11 bright green
-    14, // 12 bright cyan
-    9, // 13 bright red
-    13, // 14 bright magenta
-    11, // 15 bright yellow
-    15, // 16 bright white
-};
-
-fn sixcube_to_channel(sixcube: u32) u32 {
-    // Although the range top for the extended range is 0xFF, 6 is not divisible into 0xFF,
-    // so we use 0xF0 instead with a scaler
-    const equal_divisions = 0xF0 / 6;
-
-    // Since the range is to 0xFF but 6 isn't divisible, we must add a scaler to get it to 0xFF at the last index (5)
-    const scaler = 0xFF - (equal_divisions * 5);
-
-    return if (sixcube > 0) (sixcube * equal_divisions) + scaler else 0;
-}
-
-fn convert_256_to_rgb(color_256: u32) u32 {
-    var rgb_color: u32 = 0;
-
-    // 0 - 15 is the standard color range, map to array table
-    if (color_256 < 16) {
-        rgb_color = rgb_color_16[color_256];
-    }
-    // 16 - 231 is the extended range
-    else if (color_256 < 232) {
-
-        // For extended term range we subtract by 16 to get it in a 0..(6x6x6) cube (range of 216)
-        // divide by 36 gets the depth of the cube (6x6x1)
-        // divide by 6 gets the width of the cube (6x1)
-        // divide by 1 gets the height of the cube (divide 1 for clarity for what we are doing)
-        // each channel can be 6 levels of brightness hence remander operation of 6
-        // finally bitshift to correct rgb channel (16 for red, 8 for green, 0 for blue)
-        rgb_color |= sixcube_to_channel(((color_256 - 16) / 36) % 6) << 16;
-        rgb_color |= sixcube_to_channel(((color_256 - 16) / 6) % 6) << 8;
-        rgb_color |= sixcube_to_channel(((color_256 - 16) / 1) % 6);
-    }
-    // 232 - 255 is the grayscale range
-    else {
-
-        // For grayscale we have a space of 232 - 255 (24)
-        // subtract by 232 to get it into the 0..23 range
-        // standard colors will contain white and black, so we do not use them in the grayscale range (0 is 0x08, 23 is 0xEE)
-        // this results in a skip of 0x08 for the first color and divisions of 0x0A
-        // example: term_col 232 = scaler + equal_divisions * (232 - 232) which becomes (scaler + 0x00) == 0x08
-        // example: term_col 255 = scaler + equal_divisions * (255 - 232) which becomes (scaler + 0xE6) == 0xEE
-        const scaler = 0x08;
-
-        // to get equal parts, the equation is:
-        // 0xEE = equal_divisions * 23 + scaler | top of range is 0xEE, 23 is last element value (255 minus 232)
-        // reordered to solve for equal_divisions:
-        const equal_divisions = (0xEE - scaler) / 23; // evals to 0x0A
-
-        const channel = scaler + equal_divisions * (color_256 - 232);
-
-        // gray is equal value of same channel color in rgb
-        rgb_color = channel | (channel << 8) | (channel << 16);
-    }
-
-    return rgb_color;
-}
-
-const DurFile = @This();
-
-allocator: Allocator,
-terminal_buffer: *TerminalBuffer,
-frames: u64,
-time_previous: i64,
-x_offset: u32,
-y_offset: u32,
-full_color: bool,
-dur_movie: DurFormat,
-frame_width: u32,
-frame_height: u32,
-frame_time: u32,
-is_color_format_16: bool,
-
-pub fn init(allocator: Allocator, terminal_buffer: *TerminalBuffer, log_writer: *std.io.Writer, file_path: []const u8, x_offset: u32, y_offset: u32, full_color: bool) !DurFile {
-    var dur_movie: DurFormat = .init(allocator);
-
-    // error state is recoverable when thrown to main and results in no background with Dummy in main
-    dur_movie.create_from_file(allocator, file_path) catch |err| switch (err) {
-        error.FileNotFound => {
-            try log_writer.print("error: dur_file was not found at: {s}\n", .{file_path});
-            return err;
-        },
-        error.NotValidFile => {
-            try log_writer.print("error: dur_file loaded was invalid or not a dur file!\n", .{});
-            return err;
-        },
-        else => return err,
-    };
-
-    // 4 bit mode with 256 color is unsupported
-    if (!full_color and eql(u8, dur_movie.colorFormat.?, "256")) {
-        try log_writer.print("error: dur_file can not be 256 color encoded when not using full_color option!\n", .{});
-        dur_movie.deinit();
-        return error.InvalidColorFormat;
-    }
-
-    const buf_width: u32 = @intCast(terminal_buffer.width);
-    const buf_height: u32 = @intCast(terminal_buffer.height);
-
-    const movie_width: u32 = @intCast(dur_movie.columns.?);
-    const movie_height: u32 = @intCast(dur_movie.lines.?);
-
-    // Clamp to prevent user from exceeding draw window
-    const x_offset_clamped = std.math.clamp(x_offset, 0, buf_width - 1);
-    const y_offset_clamped = std.math.clamp(y_offset, 0, buf_height - 1);
-
-    // Ensure if user offsets and frame goes offscreen, it will not overflow draw
-    const frame_width = if ((movie_width + x_offset_clamped) < buf_width) movie_width else buf_width - x_offset_clamped;
-    const frame_height = if ((movie_height + y_offset_clamped) < buf_height) movie_height else buf_height - y_offset_clamped;
-
-    // Convert dur fps to frames per ms
-    const frame_time: u32 = @intFromFloat(1000 / dur_movie.framerate.?);
-
-    return .{
-        .allocator = allocator,
-        .terminal_buffer = terminal_buffer,
-        .frames = 0,
-        .time_previous = std.time.milliTimestamp(),
-        .x_offset = x_offset_clamped,
-        .y_offset = y_offset_clamped,
-        .full_color = full_color,
-        .dur_movie = dur_movie,
-        .frame_width = frame_width,
-        .frame_height = frame_height,
-        .frame_time = frame_time,
-        .is_color_format_16 = eql(u8, dur_movie.colorFormat.?, "16"),
-    };
-}
-
-pub fn animation(self: *DurFile) Animation {
-    return Animation.init(self, deinit, realloc, draw);
-}
-
-fn deinit(self: *DurFile) void {
-    self.dur_movie.deinit();
-}
-
-fn realloc(_: *DurFile) anyerror!void {}
-
-fn draw(self: *DurFile) void {
-    const current_frame = self.dur_movie.frames.items[self.frames];
-
-    for (0..self.frame_height) |y| {
-        var iter = std.unicode.Utf8View.initUnchecked(current_frame.contents[y]).iterator();
-
-        for (0..self.frame_width) |x| {
-            const codepoint: u21 = iter.nextCodepoint().?;
-            const color_map = current_frame.colorMap[x][y];
-
-            var color_map_0: u32 = @intCast(if (color_map[0] == -1) 0 else color_map[0]);
-            var color_map_1: u32 = @intCast(if (color_map[1] == -1) 0 else color_map[1]);
-
-            if (self.is_color_format_16) {
-                color_map_0 = durcolor_table_to_color16[color_map_0];
-                color_map_1 = durcolor_table_to_color16[color_map_1 + 1]; // Add 1, dur source stores it like this for some reason
-            }
-
-            const fg_color = if (self.full_color) convert_256_to_rgb(color_map_0) else tb_color_16[color_map_0];
-            const bg_color = if (self.full_color) convert_256_to_rgb(color_map_1) else tb_color_16[color_map_1];
-
-            const cell = Cell{ .ch = @intCast(codepoint), .fg = fg_color, .bg = bg_color };
-
-            cell.put(x + self.x_offset, y + self.y_offset);
-        }
-    }
-
-    const time_current = std.time.milliTimestamp();
-    const delta_time = time_current - self.time_previous;
-
-    // Convert delay from sec to ms
-    const delay_time: u32 = @intFromFloat(current_frame.delay * 1000);
-    if (delta_time > (self.frame_time + delay_time)) {
-        self.time_previous = time_current;
-
-        const frame_count = self.dur_movie.frames.items.len;
-        self.frames = (self.frames + 1) % frame_count;
-    }
-}

src/animations/GameOfLife.zig

@@ -1,189 +0,0 @@
-const std = @import("std");
-const Animation = @import("../tui/Animation.zig");
-const Cell = @import("../tui/Cell.zig");
-const TerminalBuffer = @import("../tui/TerminalBuffer.zig");
-
-const Allocator = std.mem.Allocator;
-
-const GameOfLife = @This();
-
-// Visual styles - using block characters like other animations
-const ALIVE_CHAR: u21 = 0x2588; // Full block █
-const DEAD_CHAR: u21 = ' ';
-const NEIGHBOR_DIRS = [_][2]i8{
-    .{ -1, -1 }, .{ -1, 0 }, .{ -1, 1 },
-    .{ 0, -1 },  .{ 0, 1 },  .{ 1, -1 },
-    .{ 1, 0 },   .{ 1, 1 },
-};
-
-allocator: Allocator,
-terminal_buffer: *TerminalBuffer,
-current_grid: []bool,
-next_grid: []bool,
-frame_counter: usize,
-generation: u64,
-fg_color: u32,
-entropy_interval: usize,
-frame_delay: usize,
-initial_density: f32,
-dead_cell: Cell,
-width: usize,
-height: usize,
-
-pub fn init(allocator: Allocator, terminal_buffer: *TerminalBuffer, fg_color: u32, entropy_interval: usize, frame_delay: usize, initial_density: f32) !GameOfLife {
-    const width = terminal_buffer.width;
-    const height = terminal_buffer.height;
-    const grid_size = width * height;
-
-    const current_grid = try allocator.alloc(bool, grid_size);
-    const next_grid = try allocator.alloc(bool, grid_size);
-
-    var game = GameOfLife{
-        .allocator = allocator,
-        .terminal_buffer = terminal_buffer,
-        .current_grid = current_grid,
-        .next_grid = next_grid,
-        .frame_counter = 0,
-        .generation = 0,
-        .fg_color = fg_color,
-        .entropy_interval = entropy_interval,
-        .frame_delay = frame_delay,
-        .initial_density = initial_density,
-        .dead_cell = .{ .ch = DEAD_CHAR, .fg = @intCast(TerminalBuffer.Color.DEFAULT), .bg = terminal_buffer.bg },
-        .width = width,
-        .height = height,
-    };
-
-    // Initialize grid
-    game.initializeGrid();
-
-    return game;
-}
-
-pub fn animation(self: *GameOfLife) Animation {
-    return Animation.init(self, deinit, realloc, draw);
-}
-
-fn deinit(self: *GameOfLife) void {
-    self.allocator.free(self.current_grid);
-    self.allocator.free(self.next_grid);
-}
-
-fn realloc(self: *GameOfLife) anyerror!void {
-    const new_width = self.terminal_buffer.width;
-    const new_height = self.terminal_buffer.height;
-    const new_size = new_width * new_height;
-
-    const current_grid = try self.allocator.realloc(self.current_grid, new_size);
-    const next_grid = try self.allocator.realloc(self.next_grid, new_size);
-
-    self.current_grid = current_grid;
-    self.next_grid = next_grid;
-    self.width = new_width;
-    self.height = new_height;
-
-    self.initializeGrid();
-    self.generation = 0;
-}
-
-fn draw(self: *GameOfLife) void {
-    // Update game state at controlled frame rate
-    self.frame_counter += 1;
-    if (self.frame_counter >= self.frame_delay) {
-        self.frame_counter = 0;
-        self.updateGeneration();
-        self.generation += 1;
-
-        // Add entropy based on configuration (0 = disabled, >0 = interval)
-        if (self.entropy_interval > 0 and self.generation % self.entropy_interval == 0) {
-            self.addEntropy();
-        }
-    }
-
-    // Render with the configured color
-    const alive_cell = Cell{ .ch = ALIVE_CHAR, .fg = self.fg_color, .bg = self.terminal_buffer.bg };
-
-    for (0..self.height) |y| {
-        const row_offset = y * self.width;
-        for (0..self.width) |x| {
-            const cell = if (self.current_grid[row_offset + x]) alive_cell else self.dead_cell;
-            cell.put(x, y);
-        }
-    }
-}
-
-fn updateGeneration(self: *GameOfLife) void {
-    // Conway's Game of Life rules with optimized neighbor counting
-    for (0..self.height) |y| {
-        const row_offset = y * self.width;
-        for (0..self.width) |x| {
-            const index = row_offset + x;
-            const neighbors = self.countNeighborsOptimized(x, y);
-            const is_alive = self.current_grid[index];
-
-            // Optimized rule application
-            self.next_grid[index] = switch (neighbors) {
-                2 => is_alive,
-                3 => true,
-                else => false,
-            };
-        }
-    }
-
-    // Efficient grid swap
-    std.mem.swap([]bool, &self.current_grid, &self.next_grid);
-}
-
-fn countNeighborsOptimized(self: *GameOfLife, x: usize, y: usize) u8 {
-    var count: u8 = 0;
-
-    for (NEIGHBOR_DIRS) |dir| {
-        const neighbor_x = @as(i32, @intCast(x)) + dir[0];
-        const neighbor_y = @as(i32, @intCast(y)) + dir[1];
-        const width_i32: i32 = @intCast(self.width);
-        const height_i32: i32 = @intCast(self.height);
-
-        // Toroidal wrapping with modular arithmetic
-        const wx: usize = @intCast(@mod(neighbor_x + width_i32, width_i32));
-        const wy: usize = @intCast(@mod(neighbor_y + height_i32, height_i32));
-
-        if (self.current_grid[wy * self.width + wx]) {
-            count += 1;
-        }
-    }
-
-    return count;
-}
-
-fn initializeGrid(self: *GameOfLife) void {
-    const total_cells = self.width * self.height;
-
-    // Clear grid
-    @memset(self.current_grid, false);
-    @memset(self.next_grid, false);
-
-    // Random initialization with configurable density
-    for (0..total_cells) |i| {
-        self.current_grid[i] = self.terminal_buffer.random.float(f32) < self.initial_density;
-    }
-}
-
-fn addEntropy(self: *GameOfLife) void {
-    // Add fewer random cells but in clusters for more interesting patterns
-    const clusters = 2;
-    for (0..clusters) |_| {
-        const cx = self.terminal_buffer.random.intRangeAtMost(usize, 1, self.width - 2);
-        const cy = self.terminal_buffer.random.intRangeAtMost(usize, 1, self.height - 2);
-
-        // Small cluster around center point
-        for (0..3) |dy| {
-            for (0..3) |dx| {
-                if (self.terminal_buffer.random.float(f32) < 0.4) {
-                    const x = (cx + dx) % self.width;
-                    const y = (cy + dy) % self.height;
-                    self.current_grid[y * self.width + x] = true;
-                }
-            }
-        }
-    }
-}

src/animations/Matrix.zig

@@ -11,6 +11,8 @@ pub const FRAME_DELAY: usize = 8;
 // Characters change mid-scroll
 pub const MID_SCROLL_CHANGE = true;
 
+const DOT_HEAD_COLOR: u32 = @intCast(TerminalBuffer.Color.WHITE | TerminalBuffer.Styling.BOLD);
+
 const Matrix = @This();
 
 pub const Dot = struct {
@@ -31,12 +33,11 @@ lines: []Line,
 frame: usize,
 count: usize,
 fg: u32,
-head_col: u32,
 min_codepoint: u16,
 max_codepoint: u16,
 default_cell: Cell,
 
-pub fn init(allocator: Allocator, terminal_buffer: *TerminalBuffer, fg: u32, head_col: u32, min_codepoint: u16, max_codepoint: u16) !Matrix {
+pub fn init(allocator: Allocator, terminal_buffer: *TerminalBuffer, fg: u32, min_codepoint: u16, max_codepoint: u16) !Matrix {
     const dots = try allocator.alloc(Dot, terminal_buffer.width * (terminal_buffer.height + 1));
     const lines = try allocator.alloc(Line, terminal_buffer.width);
 
@@ -50,7 +51,6 @@ pub fn init(allocator: Allocator, terminal_buffer: *TerminalBuffer, fg: u32, hea
         .frame = 3,
         .count = 0,
         .fg = fg,
-        .head_col = head_col,
         .min_codepoint = min_codepoint,
         .max_codepoint = max_codepoint - min_codepoint,
         .default_cell = .{ .ch = ' ', .fg = fg, .bg = terminal_buffer.bg },
@@ -157,13 +157,11 @@ fn draw(self: *Matrix) void {
             const dot = self.dots[buf_width * y + x];
             const cell = if (dot.value == null or dot.value == ' ') self.default_cell else Cell{
                 .ch = @intCast(dot.value.?),
-                .fg = if (dot.is_head) self.head_col else self.fg,
+                .fg = if (dot.is_head) DOT_HEAD_COLOR else self.fg,
                 .bg = self.terminal_buffer.bg,
             };
 
             cell.put(x, y - 1);
-            // Fill background in between columns
-            self.default_cell.put(x + 1, y - 1);
         }
     }
 }

src/auth.zig

@@ -5,8 +5,8 @@ const enums = @import("enums.zig");
 const Environment = @import("Environment.zig");
 const interop = @import("interop.zig");
 const SharedError = @import("SharedError.zig");
-const LogFile = @import("LogFile.zig");
 
+const Allocator = std.mem.Allocator;
 const Md5 = std.crypto.hash.Md5;
 const utmp = interop.utmp;
 const Utmp = utmp.utmpx;
@@ -14,8 +14,8 @@ const Utmp = utmp.utmpx;
 pub const AuthOptions = struct {
     tty: u8,
     service_name: [:0]const u8,
-    path: ?[]const u8,
+    path: ?[:0]const u8,
-    session_log: ?[]const u8,
+    session_log: []const u8,
     xauth_cmd: []const u8,
     setup_cmd: []const u8,
     login_cmd: ?[]const u8,
@@ -24,33 +24,28 @@ pub const AuthOptions = struct {
 };
 
 var xorg_pid: std.posix.pid_t = 0;
-pub fn xorgSignalHandler(i: c_int) callconv(.c) void {
+pub fn xorgSignalHandler(i: c_int) callconv(.C) void {
     if (xorg_pid > 0) _ = std.c.kill(xorg_pid, i);
 }
 
 var child_pid: std.posix.pid_t = 0;
-pub fn sessionSignalHandler(i: c_int) callconv(.c) void {
+pub fn sessionSignalHandler(i: c_int) callconv(.C) void {
     if (child_pid > 0) _ = std.c.kill(child_pid, i);
 }
 
-pub fn authenticate(allocator: std.mem.Allocator, log_file: *LogFile, options: AuthOptions, current_environment: Environment, login: []const u8, password: []const u8) !void {
+pub fn authenticate(options: AuthOptions, current_environment: Environment, login: [:0]const u8, password: [:0]const u8) !void {
     var tty_buffer: [3]u8 = undefined;
-    const tty_str = try std.fmt.bufPrint(&tty_buffer, "{d}", .{options.tty});
+    const tty_str = try std.fmt.bufPrintZ(&tty_buffer, "{d}", .{options.tty});
 
     var pam_tty_buffer: [6]u8 = undefined;
     const pam_tty_str = try std.fmt.bufPrintZ(&pam_tty_buffer, "tty{d}", .{options.tty});
 
     // Set the XDG environment variables
-    try setXdgEnv(allocator, tty_str, current_environment);
+    setXdgSessionEnv(current_environment.display_server);
+    try setXdgEnv(tty_str, current_environment.xdg_session_desktop, current_environment.xdg_desktop_names);
 
     // Open the PAM session
-    const login_z = try allocator.dupeZ(u8, login);
+    var credentials = [_:null]?[*:0]const u8{ login, password };
-    defer allocator.free(login_z);
-
-    const password_z = try allocator.dupeZ(u8, password);
-    defer allocator.free(password_z);
-
-    var credentials = [_:null]?[*:0]const u8{ login_z, password_z };
 
     const conv = interop.pam.pam_conv{
         .conv = loginConv,
@@ -58,68 +53,53 @@ pub fn authenticate(allocator: std.mem.Allocator, log_file: *LogFile, options: A
     };
     var handle: ?*interop.pam.pam_handle = undefined;
 
-    var log_writer = &log_file.file_writer.interface;
-
-    try log_writer.writeAll("[pam] starting session\n");
     var status = interop.pam.pam_start(options.service_name, null, &conv, &handle);
     if (status != interop.pam.PAM_SUCCESS) return pamDiagnose(status);
     defer _ = interop.pam.pam_end(handle, status);
 
     // Set PAM_TTY as the current TTY. This is required in case it isn't being set by another PAM module
-    try log_writer.writeAll("[pam] setting tty\n");
     status = interop.pam.pam_set_item(handle, interop.pam.PAM_TTY, pam_tty_str.ptr);
     if (status != interop.pam.PAM_SUCCESS) return pamDiagnose(status);
 
     // Do the PAM routine
-    try log_writer.writeAll("[pam] authenticating\n");
     status = interop.pam.pam_authenticate(handle, 0);
     if (status != interop.pam.PAM_SUCCESS) return pamDiagnose(status);
 
-    try log_writer.writeAll("[pam] validating account\n");
     status = interop.pam.pam_acct_mgmt(handle, 0);
     if (status != interop.pam.PAM_SUCCESS) return pamDiagnose(status);
 
-    try log_writer.writeAll("[pam] setting credentials\n");
     status = interop.pam.pam_setcred(handle, interop.pam.PAM_ESTABLISH_CRED);
     if (status != interop.pam.PAM_SUCCESS) return pamDiagnose(status);
     defer status = interop.pam.pam_setcred(handle, interop.pam.PAM_DELETE_CRED);
 
-    try log_writer.writeAll("[pam] opening session\n");
     status = interop.pam.pam_open_session(handle, 0);
     if (status != interop.pam.PAM_SUCCESS) return pamDiagnose(status);
     defer status = interop.pam.pam_close_session(handle, 0);
 
-    var user_entry: interop.UsernameEntry = undefined;
+    var pwd: *interop.pwd.passwd = undefined;
     {
-        defer interop.closePasswordDatabase();
+        defer interop.pwd.endpwent();
 
         // Get password structure from username
-        user_entry = interop.getUsernameEntry(login_z) orelse return error.GetPasswordNameFailed;
+        pwd = interop.pwd.getpwnam(login) orelse return error.GetPasswordNameFailed;
     }
 
     // Set user shell if it hasn't already been set
-    if (user_entry.shell == null) interop.setUserShell(&user_entry);
+    if (pwd.pw_shell == null) {
+        interop.unistd.setusershell();
+        pwd.pw_shell = interop.unistd.getusershell();
+        interop.unistd.endusershell();
+    }
 
     var shared_err = try SharedError.init();
     defer shared_err.deinit();
 
-    log_file.deinit();
-
     child_pid = try std.posix.fork();
     if (child_pid == 0) {
-        try log_file.reinit();
+        startSession(options, tty_str, pwd, handle, current_environment) catch |e| {
-        log_writer = &log_file.file_writer.interface;
-
-        try log_writer.writeAll("starting session\n");
-
-        startSession(log_file, allocator, options, tty_str, user_entry, handle, current_environment) catch |e| {
             shared_err.writeError(e);
-
-            log_file.deinit();
             std.process.exit(1);
         };
-
-        log_file.deinit();
         std.process.exit(0);
     }
 
@@ -128,113 +108,123 @@ pub fn authenticate(allocator: std.mem.Allocator, log_file: *LogFile, options: A
     {
         // If an error occurs here, we can send SIGTERM to the session
         errdefer cleanup: {
-            std.posix.kill(child_pid, std.posix.SIG.TERM) catch break :cleanup;
+            _ = std.posix.kill(child_pid, std.posix.SIG.TERM) catch break :cleanup;
             _ = std.posix.waitpid(child_pid, 0);
         }
 
         // If we receive SIGTERM, forward it to child_pid
         const act = std.posix.Sigaction{
             .handler = .{ .handler = &sessionSignalHandler },
-            .mask = std.posix.sigemptyset(),
+            .mask = std.posix.empty_sigset,
             .flags = 0,
         };
         std.posix.sigaction(std.posix.SIG.TERM, &act, null);
 
-        try addUtmpEntry(&entry, user_entry.username.?, child_pid);
+        try addUtmpEntry(&entry, pwd.pw_name.?, child_pid);
     }
     // Wait for the session to stop
     _ = std.posix.waitpid(child_pid, 0);
 
-    try log_file.reinit();
-
     removeUtmpEntry(&entry);
 
     if (shared_err.readError()) |err| return err;
 }
 
 fn startSession(
-    log_file: *LogFile,
-    allocator: std.mem.Allocator,
     options: AuthOptions,
-    tty_str: []u8,
+    tty_str: [:0]u8,
-    user_entry: interop.UsernameEntry,
+    pwd: *interop.pwd.passwd,
     handle: ?*interop.pam.pam_handle,
     current_environment: Environment,
 ) !void {
-    // Set the user's GID & PID
+    if (builtin.os.tag == .freebsd) {
-    try interop.setUserContext(allocator, user_entry);
+        // FreeBSD has initgroups() in unistd
+        const status = interop.unistd.initgroups(pwd.pw_name, pwd.pw_gid);
+        if (status != 0) return error.GroupInitializationFailed;
+
+        // FreeBSD sets the GID and UID with setusercontext()
+        const result = interop.pwd.setusercontext(null, pwd, pwd.pw_uid, interop.pwd.LOGIN_SETALL);
+        if (result != 0) return error.SetUserUidFailed;
+    } else {
+        const status = interop.grp.initgroups(pwd.pw_name, pwd.pw_gid);
+        if (status != 0) return error.GroupInitializationFailed;
+
+        std.posix.setgid(pwd.pw_gid) catch return error.SetUserGidFailed;
+        std.posix.setuid(pwd.pw_uid) catch return error.SetUserUidFailed;
+    }
 
     // Set up the environment
-    try initEnv(allocator, user_entry, options.path);
+    try initEnv(pwd, options.path);
 
     // Reset the XDG environment variables
-    try setXdgEnv(allocator, tty_str, current_environment);
+    setXdgSessionEnv(current_environment.display_server);
+    try setXdgEnv(tty_str, current_environment.xdg_session_desktop, current_environment.xdg_desktop_names);
 
     // Set the PAM variables
     const pam_env_vars: ?[*:null]?[*:0]u8 = interop.pam.pam_getenvlist(handle);
     if (pam_env_vars == null) return error.GetEnvListFailed;
 
     const env_list = std.mem.span(pam_env_vars.?);
-    for (env_list) |env_var| try interop.putEnvironmentVariable(env_var);
+    for (env_list) |env_var| _ = interop.stdlib.putenv(env_var);
 
     // Change to the user's home directory
-    std.posix.chdir(user_entry.home.?) catch return error.ChangeDirectoryFailed;
+    std.posix.chdirZ(pwd.pw_dir.?) catch return error.ChangeDirectoryFailed;
 
     // Signal to the session process to give up control on the TTY
-    std.posix.kill(options.session_pid, std.posix.SIG.CHLD) catch return error.TtyControlTransferFailed;
+    _ = std.posix.kill(options.session_pid, std.posix.SIG.CHLD) catch return error.TtyControlTransferFailed;
 
     // Execute what the user requested
     switch (current_environment.display_server) {
-        .wayland, .shell, .custom => try executeCmd(log_file, allocator, user_entry.shell.?, options, current_environment.is_terminal, current_environment.cmd),
+        .wayland => try executeWaylandCmd(pwd.pw_shell.?, options, current_environment.cmd),
+        .shell => try executeShellCmd(pwd.pw_shell.?, options),
         .xinitrc, .x11 => if (build_options.enable_x11_support) {
             var vt_buf: [5]u8 = undefined;
             const vt = try std.fmt.bufPrint(&vt_buf, "vt{d}", .{options.tty});
-            try executeX11Cmd(log_file, allocator, user_entry.shell.?, user_entry.home.?, options, current_environment.cmd orelse "", vt);
+            try executeX11Cmd(pwd.pw_shell.?, pwd.pw_dir.?, options, current_environment.cmd, vt);
         },
     }
 }
 
-fn initEnv(allocator: std.mem.Allocator, entry: interop.UsernameEntry, path_env: ?[]const u8) !void {
+fn initEnv(pwd: *interop.pwd.passwd, path_env: ?[:0]const u8) !void {
-    if (entry.home) |home| {
+    _ = interop.stdlib.setenv("HOME", pwd.pw_dir, 1);
-        try interop.setEnvironmentVariable(allocator, "HOME", home, true);
+    _ = interop.stdlib.setenv("PWD", pwd.pw_dir, 1);
-        try interop.setEnvironmentVariable(allocator, "PWD", home, true);
+    _ = interop.stdlib.setenv("SHELL", pwd.pw_shell, 1);
-    } else return error.NoHomeDirectory;
+    _ = interop.stdlib.setenv("USER", pwd.pw_name, 1);
-
+    _ = interop.stdlib.setenv("LOGNAME", pwd.pw_name, 1);
-    try interop.setEnvironmentVariable(allocator, "SHELL", entry.shell.?, true);
-    try interop.setEnvironmentVariable(allocator, "USER", entry.username.?, true);
-    try interop.setEnvironmentVariable(allocator, "LOGNAME", entry.username.?, true);
 
     if (path_env) |path| {
-        interop.setEnvironmentVariable(allocator, "PATH", path, true) catch return error.SetPathFailed;
+        const status = interop.stdlib.setenv("PATH", path, 1);
+        if (status != 0) return error.SetPathFailed;
     }
 }
 
-fn setXdgEnv(allocator: std.mem.Allocator, tty_str: []u8, environment: Environment) !void {
+fn setXdgSessionEnv(display_server: enums.DisplayServer) void {
-    try interop.setEnvironmentVariable(allocator, "XDG_SESSION_TYPE", switch (environment.display_server) {
+    _ = interop.stdlib.setenv("XDG_SESSION_TYPE", switch (display_server) {
         .wayland => "wayland",
         .shell => "tty",
         .xinitrc, .x11 => "x11",
-        .custom => if (environment.is_terminal) "tty" else "unspecified",
+    }, 0);
-    }, false);
+}
 
+fn setXdgEnv(tty_str: [:0]u8, maybe_desktop_name: ?[:0]const u8, maybe_xdg_desktop_names: ?[:0]const u8) !void {
     // The "/run/user/%d" directory is not available on FreeBSD. It is much
     // better to stick to the defaults and let applications using
     // XDG_RUNTIME_DIR to fall back to directories inside user's home
     // directory.
     if (builtin.os.tag != .freebsd) {
-        const uid = std.posix.getuid();
+        const uid = interop.unistd.getuid();
         var uid_buffer: [32]u8 = undefined; // No UID can be larger than this
-        const uid_str = try std.fmt.bufPrint(&uid_buffer, "/run/user/{d}", .{uid});
+        const uid_str = try std.fmt.bufPrintZ(&uid_buffer, "/run/user/{d}", .{uid});
 
-        try interop.setEnvironmentVariable(allocator, "XDG_RUNTIME_DIR", uid_str, false);
+        _ = interop.stdlib.setenv("XDG_RUNTIME_DIR", uid_str, 0);
     }
 
-    if (environment.xdg_desktop_names) |xdg_desktop_names| try interop.setEnvironmentVariable(allocator, "XDG_CURRENT_DESKTOP", xdg_desktop_names, false);
+    if (maybe_xdg_desktop_names) |xdg_desktop_names| _ = interop.stdlib.setenv("XDG_CURRENT_DESKTOP", xdg_desktop_names, 0);
-    try interop.setEnvironmentVariable(allocator, "XDG_SESSION_CLASS", "user", false);
+    _ = interop.stdlib.setenv("XDG_SESSION_CLASS", "user", 0);
-    try interop.setEnvironmentVariable(allocator, "XDG_SESSION_ID", "1", false);
+    _ = interop.stdlib.setenv("XDG_SESSION_ID", "1", 0);
-    if (environment.xdg_session_desktop) |desktop_name| try interop.setEnvironmentVariable(allocator, "XDG_SESSION_DESKTOP", desktop_name, false);
+    if (maybe_desktop_name) |desktop_name| _ = interop.stdlib.setenv("XDG_SESSION_DESKTOP", desktop_name, 0);
-    try interop.setEnvironmentVariable(allocator, "XDG_SEAT", "seat0", false);
+    _ = interop.stdlib.setenv("XDG_SEAT", "seat0", 0);
-    try interop.setEnvironmentVariable(allocator, "XDG_VTNR", tty_str, false);
+    _ = interop.stdlib.setenv("XDG_VTNR", tty_str, 0);
 }
 
 fn loginConv(
@@ -242,7 +232,7 @@ fn loginConv(
     msg: ?[*]?*const interop.pam.pam_message,
     resp: ?*?[*]interop.pam.pam_response,
     appdata_ptr: ?*anyopaque,
-) callconv(.c) c_int {
+) callconv(.C) c_int {
     const message_count: u32 = @intCast(num_msg);
     const messages = msg.?;
 
@@ -286,8 +276,8 @@ fn loginConv(
     if (status != interop.pam.PAM_SUCCESS) {
         // Memory is freed by pam otherwise
         allocator.free(response);
-        if (username) |str| allocator.free(str);
+        if (username != null) allocator.free(username.?);
-        if (password) |str| allocator.free(str);
+        if (password != null) allocator.free(password.?);
     } else {
         resp.?.* = response.ptr;
     }
@@ -311,50 +301,46 @@ fn getXPid(display_num: u8) !i32 {
     const file = try std.fs.openFileAbsolute(file_name, .{});
     defer file.close();
 
-    var file_buffer: [32]u8 = undefined;
+    var file_buf: [20]u8 = undefined;
-    var file_reader = file.reader(&file_buffer);
+    var fbs = std.io.fixedBufferStream(&file_buf);
-    var reader = &file_reader.interface;
 
-    var buffer: [20]u8 = undefined;
+    _ = try file.reader().streamUntilDelimiter(fbs.writer(), '\n', 20);
-    var writer = std.Io.Writer.fixed(&buffer);
+    const line = fbs.getWritten();
 
-    const written = try reader.streamDelimiter(&writer, '\n');
+    return std.fmt.parseInt(i32, std.mem.trim(u8, line, " "), 10);
-    return std.fmt.parseInt(i32, std.mem.trim(u8, buffer[0..written], " "), 10);
 }
 
-fn createXauthFile(pwd: []const u8, buffer: []u8) ![]const u8 {
+fn createXauthFile(pwd: [:0]const u8) ![:0]const u8 {
     var xauth_buf: [100]u8 = undefined;
-    var xauth_dir: []const u8 = undefined;
+    var xauth_dir: [:0]const u8 = undefined;
     const xdg_rt_dir = std.posix.getenv("XDG_RUNTIME_DIR");
     var xauth_file: []const u8 = "lyxauth";
 
-    if (xdg_rt_dir == null) no_rt_dir: {
+    if (xdg_rt_dir == null) {
         const xdg_cfg_home = std.posix.getenv("XDG_CONFIG_HOME");
-        if (xdg_cfg_home == null) no_cfg_home: {
+        var sb: std.c.Stat = undefined;
-            xauth_dir = try std.fmt.bufPrint(&xauth_buf, "{s}/.config", .{pwd});
+        if (xdg_cfg_home == null) {
-
+            xauth_dir = try std.fmt.bufPrintZ(&xauth_buf, "{s}/.config", .{pwd});
-            var dir = std.fs.cwd().openDir(xauth_dir, .{}) catch {
+            _ = std.c.stat(xauth_dir, &sb);
-                // xauth_dir isn't a directory
+            const mode = sb.mode & std.posix.S.IFMT;
+            if (mode == std.posix.S.IFDIR) {
+                xauth_dir = try std.fmt.bufPrintZ(&xauth_buf, "{s}/ly", .{xauth_dir});
+            } else {
                 xauth_dir = pwd;
                 xauth_file = ".lyxauth";
-                break :no_cfg_home;
+            }
-            };
-            dir.close();
-
-            // xauth_dir is a directory, use it to store Xauthority
-            xauth_dir = try std.fmt.bufPrint(&xauth_buf, "{s}/.config/ly", .{pwd});
         } else {
-            xauth_dir = try std.fmt.bufPrint(&xauth_buf, "{s}/ly", .{xdg_cfg_home.?});
+            xauth_dir = try std.fmt.bufPrintZ(&xauth_buf, "{s}/ly", .{xdg_cfg_home.?});
         }
 
-        const file = std.fs.cwd().openFile(xauth_dir, .{}) catch break :no_rt_dir;
+        _ = std.c.stat(xauth_dir, &sb);
-        file.close();
+        const mode = sb.mode & std.posix.S.IFMT;
-
+        if (mode != std.posix.S.IFDIR) {
-        // xauth_dir is a file, create the parent directory
+            std.posix.mkdir(xauth_dir, 777) catch {
-        std.posix.mkdir(xauth_dir, 777) catch {
+                xauth_dir = pwd;
-            xauth_dir = pwd;
+                xauth_file = ".lyxauth";
-            xauth_file = ".lyxauth";
+            };
-        };
+        }
     } else {
         xauth_dir = xdg_rt_dir.?;
     }
@@ -364,11 +350,9 @@ fn createXauthFile(pwd: []const u8, buffer: []u8) ![]const u8 {
     while (xauth_dir[i] == '/') i -= 1;
     const trimmed_xauth_dir = xauth_dir[0 .. i + 1];
 
-    const xauthority: []u8 = try std.fmt.bufPrint(buffer, "{s}/{s}", .{ trimmed_xauth_dir, xauth_file });
+    var buf: [256]u8 = undefined;
-
+    const xauthority: [:0]u8 = try std.fmt.bufPrintZ(&buf, "{s}/{s}", .{ trimmed_xauth_dir, xauth_file });
-    std.fs.makeDirAbsolute(trimmed_xauth_dir) catch {};
+    const file = try std.fs.createFileAbsoluteZ(xauthority, .{});
-
-    const file = try std.fs.createFileAbsolute(xauthority, .{});
     file.close();
 
     return xauthority;
@@ -384,10 +368,13 @@ fn mcookie() [Md5.digest_length * 2]u8 {
     return std.fmt.bytesToHex(&out, .lower);
 }
 
-fn xauth(log_file: *LogFile, allocator: std.mem.Allocator, display_name: []u8, shell: [*:0]const u8, home: []const u8, xauth_buffer: []u8, options: AuthOptions) !void {
+fn xauth(display_name: [:0]u8, shell: [*:0]const u8, pw_dir: [*:0]const u8, options: AuthOptions) !void {
-    const xauthority = try createXauthFile(home, xauth_buffer);
+    var pwd_buf: [100]u8 = undefined;
-    try interop.setEnvironmentVariable(allocator, "XAUTHORITY", xauthority, true);
+    const pwd = try std.fmt.bufPrintZ(&pwd_buf, "{s}", .{pw_dir});
-    try interop.setEnvironmentVariable(allocator, "DISPLAY", display_name, true);
+
+    const xauthority = try createXauthFile(pwd);
+    _ = interop.stdlib.setenv("XAUTHORITY", xauthority, 1);
+    _ = interop.stdlib.setenv("DISPLAY", display_name, 1);
 
     const magic_cookie = mcookie();
 
@@ -395,42 +382,46 @@ fn xauth(log_file: *LogFile, allocator: std.mem.Allocator, display_name: []u8, s
     if (pid == 0) {
         var cmd_buffer: [1024]u8 = undefined;
         const cmd_str = std.fmt.bufPrintZ(&cmd_buffer, "{s} add {s} . {s}", .{ options.xauth_cmd, display_name, magic_cookie }) catch std.process.exit(1);
-
         const args = [_:null]?[*:0]const u8{ shell, "-c", cmd_str };
         std.posix.execveZ(shell, &args, std.c.environ) catch {};
         std.process.exit(1);
     }
 
     const status = std.posix.waitpid(pid, 0);
-    if (status.status != 0) {
+    if (status.status != 0) return error.XauthFailed;
-        try log_file.file_writer.interface.print("xauth command failed with status {d}\n", .{status.status});
-        return error.XauthFailed;
-    }
 }
 
-fn executeX11Cmd(log_file: *LogFile, allocator: std.mem.Allocator, shell: []const u8, home: []const u8, options: AuthOptions, desktop_cmd: []const u8, vt: []const u8) !void {
+fn executeShellCmd(shell: [*:0]const u8, options: AuthOptions) !void {
-    var log_writer = &log_file.file_writer.interface;
+    // We don't want to redirect stdout and stderr in a shell session
-    var xauth_buffer: [256]u8 = undefined;
 
-    try log_writer.writeAll("[x11] getting free display\n");
+    var cmd_buffer: [1024]u8 = undefined;
+    const cmd_str = try std.fmt.bufPrintZ(&cmd_buffer, "{s} {s} {s}", .{ options.setup_cmd, options.login_cmd orelse "", shell });
+    const args = [_:null]?[*:0]const u8{ shell, "-c", cmd_str };
+    return std.posix.execveZ(shell, &args, std.c.environ);
+}
+
+fn executeWaylandCmd(shell: [*:0]const u8, options: AuthOptions, desktop_cmd: []const u8) !void {
+    const log_file = try redirectStandardStreams(options.session_log, true);
+    defer log_file.close();
+
+    var cmd_buffer: [1024]u8 = undefined;
+    const cmd_str = try std.fmt.bufPrintZ(&cmd_buffer, "{s} {s} {s}", .{ options.setup_cmd, options.login_cmd orelse "", desktop_cmd });
+    const args = [_:null]?[*:0]const u8{ shell, "-c", cmd_str };
+    return std.posix.execveZ(shell, &args, std.c.environ);
+}
+
+fn executeX11Cmd(shell: [*:0]const u8, pw_dir: [*:0]const u8, options: AuthOptions, desktop_cmd: []const u8, vt: []const u8) !void {
     const display_num = try getFreeDisplay();
-    var buf: [4]u8 = undefined;
+    var buf: [5]u8 = undefined;
-    const display_name = try std.fmt.bufPrint(&buf, ":{d}", .{display_num});
+    const display_name = try std.fmt.bufPrintZ(&buf, ":{d}", .{display_num});
+    try xauth(display_name, shell, pw_dir, options);
 
-    const shell_z = try allocator.dupeZ(u8, shell);
-    defer allocator.free(shell_z);
-
-    try log_writer.writeAll("[x11] creating xauth file\n");
-    try xauth(log_file, allocator, display_name, shell_z, home, &xauth_buffer, options);
-
-    try log_writer.writeAll("[x11] starting x server\n");
     const pid = try std.posix.fork();
     if (pid == 0) {
         var cmd_buffer: [1024]u8 = undefined;
         const cmd_str = std.fmt.bufPrintZ(&cmd_buffer, "{s} {s} {s}", .{ options.x_cmd, display_name, vt }) catch std.process.exit(1);
-
+        const args = [_:null]?[*:0]const u8{ shell, "-c", cmd_str };
-        const args = [_:null]?[*:0]const u8{ shell_z, "-c", cmd_str };
+        std.posix.execveZ(shell, &args, std.c.environ) catch {};
-        std.posix.execveZ(shell_z, &args, std.c.environ) catch {};
         std.process.exit(1);
     }
 
@@ -446,24 +437,21 @@ fn executeX11Cmd(log_file: *LogFile, allocator: std.mem.Allocator, shell: []cons
 
     // X Server detaches from the process.
     // PID can be fetched from /tmp/X{d}.lock
-    try log_writer.writeAll("[x11] getting x server pid\n");
     const x_pid = try getXPid(display_num);
 
-    try log_writer.writeAll("[x11] launching environment\n");
     xorg_pid = try std.posix.fork();
     if (xorg_pid == 0) {
         var cmd_buffer: [1024]u8 = undefined;
         const cmd_str = std.fmt.bufPrintZ(&cmd_buffer, "{s} {s} {s}", .{ options.setup_cmd, options.login_cmd orelse "", desktop_cmd }) catch std.process.exit(1);
-
+        const args = [_:null]?[*:0]const u8{ shell, "-c", cmd_str };
-        const args = [_:null]?[*:0]const u8{ shell_z, "-c", cmd_str };
+        std.posix.execveZ(shell, &args, std.c.environ) catch {};
-        std.posix.execveZ(shell_z, &args, std.c.environ) catch {};
         std.process.exit(1);
     }
 
     // If we receive SIGTERM, clean up by killing the xorg_pid process
     const act = std.posix.Sigaction{
         .handler = .{ .handler = &xorgSignalHandler },
-        .mask = std.posix.sigemptyset(),
+        .mask = std.posix.empty_sigset,
         .flags = 0,
     };
     std.posix.sigaction(std.posix.SIG.TERM, &act, null);
@@ -471,44 +459,16 @@ fn executeX11Cmd(log_file: *LogFile, allocator: std.mem.Allocator, shell: []cons
     _ = std.posix.waitpid(xorg_pid, 0);
     interop.xcb.xcb_disconnect(xcb);
 
-    // TODO: Find a more robust way to ensure that X has been terminated (pidfds?)
     std.posix.kill(x_pid, std.posix.SIG.TERM) catch {};
     std.Thread.sleep(std.time.ns_per_s * 1); // Wait 1 second before sending SIGKILL
     std.posix.kill(x_pid, std.posix.SIG.KILL) catch return;
 
-    _ = std.posix.waitpid(x_pid, 0);
+    var status: c_int = 0;
+    _ = std.c.waitpid(x_pid, &status, 0);
 }
 
-fn executeCmd(global_log_file: *LogFile, allocator: std.mem.Allocator, shell: []const u8, options: AuthOptions, is_terminal: bool, exec_cmd: ?[]const u8) !void {
+fn redirectStandardStreams(session_log: []const u8, create: bool) !std.fs.File {
-    var maybe_log_file: ?std.fs.File = null;
+    const log_file = if (create) (try std.fs.cwd().createFile(session_log, .{ .mode = 0o666 })) else (try std.fs.cwd().openFile(session_log, .{ .mode = .read_write }));
-    if (!is_terminal) {
-        // For custom desktop entries, the "Terminal" value here determines if
-        // we redirect standard output & error or not. That is, we redirect only
-        // if it's equal to false (so if it's not running in a TTY).
-        if (options.session_log) |log_path| {
-            maybe_log_file = try redirectStandardStreams(global_log_file, log_path, true);
-        }
-    }
-    defer if (maybe_log_file) |log_file| log_file.close();
-
-    const shell_z = try allocator.dupeZ(u8, shell);
-    defer allocator.free(shell_z);
-
-    var cmd_buffer: [1024]u8 = undefined;
-    const cmd_str = try std.fmt.bufPrintZ(&cmd_buffer, "{s} {s} {s}", .{ options.setup_cmd, options.login_cmd orelse "", exec_cmd orelse shell });
-
-    const args = [_:null]?[*:0]const u8{ shell_z, "-c", cmd_str };
-    return std.posix.execveZ(shell_z, &args, std.c.environ);
-}
-
-fn redirectStandardStreams(global_log_file: *LogFile, session_log: []const u8, create: bool) !std.fs.File {
-    const log_file = if (create) (std.fs.cwd().createFile(session_log, .{ .mode = 0o666 }) catch |err| {
-        try global_log_file.file_writer.interface.print("failed to create new session log file: {s}\n", .{@errorName(err)});
-        return err;
-    }) else (std.fs.cwd().openFile(session_log, .{ .mode = .read_write }) catch |err| {
-        try global_log_file.file_writer.interface.print("failed to open existing session log file: {s}\n", .{@errorName(err)});
-        return err;
-    });
 
     try std.posix.dup2(std.posix.STDOUT_FILENO, std.posix.STDERR_FILENO);
     try std.posix.dup2(log_file.handle, std.posix.STDOUT_FILENO);
@@ -516,21 +476,18 @@ fn redirectStandardStreams(global_log_file: *LogFile, session_log: []const u8, c
     return log_file;
 }
 
-fn addUtmpEntry(entry: *Utmp, username: []const u8, pid: c_int) !void {
+fn addUtmpEntry(entry: *Utmp, username: [*:0]const u8, pid: c_int) !void {
     entry.ut_type = utmp.USER_PROCESS;
     entry.ut_pid = pid;
 
-    var buf: [std.fs.max_path_bytes]u8 = undefined;
+    var buf: [4096]u8 = undefined;
-    const tty_path = try std.os.getFdPath(std.posix.STDIN_FILENO, &buf);
+    const ttyname = try std.os.getFdPath(std.posix.STDIN_FILENO, &buf);
 
-    // Get the TTY name (i.e. without the /dev/ prefix)
     var ttyname_buf: [@sizeOf(@TypeOf(entry.ut_line))]u8 = undefined;
-    _ = try std.fmt.bufPrintZ(&ttyname_buf, "{s}", .{tty_path["/dev/".len..]});
+    _ = try std.fmt.bufPrintZ(&ttyname_buf, "{s}", .{ttyname["/dev/".len..]});
 
     entry.ut_line = ttyname_buf;
-    // Get the TTY ID (i.e. without the tty prefix) and truncate it to the size
+    entry.ut_id = ttyname_buf["tty".len..7].*;
-    // of ut_id if necessary
-    entry.ut_id = ttyname_buf["tty".len..(@sizeOf(@TypeOf(entry.ut_id)) + "tty".len)].*;
 
     var username_buf: [@sizeOf(@TypeOf(entry.ut_user))]u8 = undefined;
     _ = try std.fmt.bufPrintZ(&username_buf, "{s}", .{username});
@@ -541,17 +498,14 @@ fn addUtmpEntry(entry: *Utmp, username: []const u8, pid: c_int) !void {
     host[0] = 0;
     entry.ut_host = host;
 
-    const time = try interop.getTimeOfDay();
+    var tv: interop.system_time.timeval = undefined;
+    _ = interop.system_time.gettimeofday(&tv, null);
 
     entry.ut_tv = .{
-        .tv_sec = @intCast(time.seconds),
+        .tv_sec = @intCast(tv.tv_sec),
-        .tv_usec = @intCast(time.microseconds),
+        .tv_usec = @intCast(tv.tv_usec),
     };
-
+    entry.ut_addr_v6[0] = 0;
-    // FreeBSD doesn't have this field
-    if (builtin.os.tag == .linux) {
-        entry.ut_addr_v6[0] = 0;
-    }
 
     utmp.setutxent();
     _ = utmp.pututxline(entry);

src/bigclock.zig

@@ -11,11 +11,13 @@ pub const WIDTH = Lang.WIDTH;
 pub const HEIGHT = Lang.HEIGHT;
 pub const SIZE = Lang.SIZE;
 
-pub fn clockCell(animate: bool, char: u8, fg: u32, bg: u32, bigclock: Bigclock) ![SIZE]Cell {
+pub fn clockCell(animate: bool, char: u8, fg: u32, bg: u32, bigclock: Bigclock) [SIZE]Cell {
     var cells: [SIZE]Cell = undefined;
 
-    const time = try interop.getTimeOfDay();
+    var tv: interop.system_time.timeval = undefined;
-    const clock_chars = toBigNumber(if (animate and char == ':' and @divTrunc(time.microseconds, 500000) != 0) ' ' else char, bigclock);
+    _ = interop.system_time.gettimeofday(&tv, null);
+
+    const clock_chars = toBigNumber(if (animate and char == ':' and @divTrunc(tv.tv_usec, 500000) != 0) ' ' else char, bigclock);
     for (0..cells.len) |i| cells[i] = Cell.init(clock_chars[i], fg, bg);
 
     return cells;
@@ -49,9 +51,6 @@ fn toBigNumber(char: u8, bigclock: Bigclock) [SIZE]u21 {
         '7' => locale_chars.SEVEN,
         '8' => locale_chars.EIGHT,
         '9' => locale_chars.NINE,
-        'p', 'P' => locale_chars.P,
-        'a', 'A' => locale_chars.A,
-        'm', 'M' => locale_chars.M,
         ':' => locale_chars.S,
         else => locale_chars.E,
     };

src/bigclock/Lang.zig

@@ -1,13 +1,12 @@
-const interop = @import("../interop.zig");
+const builtin = @import("builtin");
 
 pub const WIDTH = 5;
 pub const HEIGHT = 5;
 pub const SIZE = WIDTH * HEIGHT;
 
-pub const X: u32 = if (interop.supportsUnicode()) 0x2593 else '#';
+pub const X: u32 = if (builtin.os.tag == .linux or builtin.os.tag.isBSD()) 0x2593 else '#';
 pub const O: u32 = 0;
 
-// zig fmt: off
 pub const LocaleChars = struct {
     ZERO:   [SIZE]u21,
     ONE:    [SIZE]u21,
@@ -21,8 +20,4 @@ pub const LocaleChars = struct {
     NINE:   [SIZE]u21,
     S:      [SIZE]u21,
     E:      [SIZE]u21,
-    P:      [SIZE]u21,
+};
-    A:      [SIZE]u21,
-    M:      [SIZE]u21,
-};
-// zig fmt: on

src/bigclock/en.zig

@@ -90,26 +90,5 @@ pub const locale_chars = LocaleChars{
         O,O,O,O,O,
         O,O,O,O,O,
     },
-    .P = [_]u21{
-        X,X,X,X,X,
-        X,X,O,X,X,
-        X,X,X,X,X,
-        X,X,O,O,O,
-        X,X,O,O,O,
-    },
-    .A = [_]u21{
-        X,X,X,X,X,
-        X,X,O,X,X,
-        X,X,X,X,X,
-        X,X,O,X,X,
-        X,X,O,X,X,
-    },
-    .M = [_]u21{
-        X,X,X,X,X,
-        X,O,X,O,X,
-        X,O,X,O,X,
-        X,O,O,O,X,
-        X,O,O,O,X,
-    },
 };
-// zig fmt: on
+// zig fmt: on

src/bigclock/fa.zig

@@ -76,27 +76,6 @@ pub const locale_chars = LocaleChars{
         O,O,O,X,O,
         O,O,O,X,O,
     },
-    .P = [_]u21{
-        O,O,O,O,O,
-        O,O,O,O,O,
-        O,O,O,O,O,
-        O,O,O,O,O,
-        O,O,O,O,O,
-    },
-    .A = [_]u21{
-        O,O,O,O,O,
-        O,O,O,O,O,
-        O,O,O,O,O,
-        O,O,O,O,O,
-        O,O,O,O,O,
-    },
-    .M = [_]u21{
-        O,O,O,O,O,
-        O,O,O,O,O,
-        O,O,O,O,O,
-        O,O,O,O,O,
-        O,O,O,O,O,
-    },
     .S = [_]u21{
         O,O,O,O,O,
         O,O,X,O,O,
@@ -112,4 +91,4 @@ pub const locale_chars = LocaleChars{
         O,O,O,O,O,
     },
 };
-// zig fmt: on
+// zig fmt: on

src/config/Config.zig

@@ -11,81 +11,56 @@ animation: Animation = .none,
 animation_timeout_sec: u12 = 0,
 asterisk: ?u32 = '*',
 auth_fails: u64 = 10,
-battery_id: ?[]const u8 = null,
-auto_login_service: [:0]const u8 = "ly-autologin",
-auto_login_session: ?[]const u8 = null,
-auto_login_user: ?[]const u8 = null,
 bg: u32 = 0x00000000,
 bigclock: Bigclock = .none,
-bigclock_12hr: bool = false,
-bigclock_seconds: bool = false,
 blank_box: bool = true,
 border_fg: u32 = 0x00FFFFFF,
 box_title: ?[]const u8 = null,
-brightness_down_cmd: [:0]const u8 = build_options.prefix_directory ++ "/bin/brightnessctl -q -n s 10%-",
+brightness_down_cmd: [:0]const u8 = build_options.prefix_directory ++ "/bin/brightnessctl -q s 10%-",
 brightness_down_key: ?[]const u8 = "F5",
-brightness_up_cmd: [:0]const u8 = build_options.prefix_directory ++ "/bin/brightnessctl -q -n s +10%",
+brightness_up_cmd: [:0]const u8 = build_options.prefix_directory ++ "/bin/brightnessctl -q s +10%",
 brightness_up_key: ?[]const u8 = "F6",
 clear_password: bool = false,
 clock: ?[:0]const u8 = null,
 cmatrix_fg: u32 = 0x0000FF00,
-cmatrix_head_col: u32 = 0x01FFFFFF,
 cmatrix_min_codepoint: u16 = 0x21,
 cmatrix_max_codepoint: u16 = 0x7B,
 colormix_col1: u32 = 0x00FF0000,
 colormix_col2: u32 = 0x000000FF,
 colormix_col3: u32 = 0x20000000,
-custom_sessions: []const u8 = build_options.config_directory ++ "/ly/custom-sessions",
+console_dev: []const u8 = "/dev/console",
 default_input: Input = .login,
-doom_fire_height: u8 = 6,
-doom_fire_spread: u8 = 2,
 doom_top_color: u32 = 0x00FF0000,
 doom_middle_color: u32 = 0x00FFFF00,
 doom_bottom_color: u32 = 0x00FFFFFF,
-dur_file_path: []const u8 = build_options.config_directory ++ "/ly/example.dur",
-dur_x_offset: u32 = 0,
-dur_y_offset: u32 = 0,
-edge_margin: u8 = 0,
 error_bg: u32 = 0x00000000,
 error_fg: u32 = 0x01FF0000,
 fg: u32 = 0x00FFFFFF,
-full_color: bool = true,
-gameoflife_fg: u32 = 0x0000FF00,
-gameoflife_entropy_interval: usize = 10,
-gameoflife_frame_delay: usize = 6,
-gameoflife_initial_density: f32 = 0.4,
-hibernate_cmd: ?[]const u8 = null,
-hibernate_key: []const u8 = "F4",
 hide_borders: bool = false,
 hide_key_hints: bool = false,
-hide_keyboard_locks: bool = false,
-hide_version_string: bool = false,
-inactivity_cmd: ?[]const u8 = null,
-inactivity_delay: u16 = 0,
 initial_info_text: ?[]const u8 = null,
 input_len: u8 = 34,
 lang: []const u8 = "en",
+load: bool = true,
 login_cmd: ?[]const u8 = null,
-login_defs_path: []const u8 = "/etc/login.defs",
 logout_cmd: ?[]const u8 = null,
-ly_log: []const u8 = "/var/log/ly.log",
 margin_box_h: u8 = 2,
 margin_box_v: u8 = 1,
 min_refresh_delta: u16 = 5,
 numlock: bool = false,
-path: ?[]const u8 = "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin",
+path: ?[:0]const u8 = "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin",
 restart_cmd: []const u8 = "/sbin/shutdown -r now",
 restart_key: []const u8 = "F2",
 save: bool = true,
 service_name: [:0]const u8 = "ly",
-session_log: ?[]const u8 = "ly-session.log",
+session_log: []const u8 = "ly-session.log",
 setup_cmd: []const u8 = build_options.config_directory ++ "/ly/setup.sh",
 shutdown_cmd: []const u8 = "/sbin/shutdown -a now",
 shutdown_key: []const u8 = "F1",
 sleep_cmd: ?[]const u8 = null,
 sleep_key: []const u8 = "F3",
-start_cmd: ?[]const u8 = null,
 text_in_center: bool = false,
+tty: u8 = build_options.tty,
 vi_default_mode: ViMode = .normal,
 vi_mode: bool = false,
 waylandsessions: []const u8 = build_options.prefix_directory ++ "/share/wayland-sessions",

src/config/Lang.zig

@@ -7,26 +7,17 @@ authenticating: []const u8 = "authenticating...",
 brightness_down: []const u8 = "decrease brightness",
 brightness_up: []const u8 = "increase brightness",
 capslock: []const u8 = "capslock",
-custom: []const u8 = "custom",
 err_alloc: []const u8 = "failed memory allocation",
-err_args: []const u8 = "unable to parse command line arguments",
-err_autologin_session: []const u8 = "autologin session not found",
 err_bounds: []const u8 = "out-of-bounds index",
 err_brightness_change: []const u8 = "failed to change brightness",
 err_chdir: []const u8 = "failed to open home folder",
-err_clock_too_long: []const u8 = "clock string too long",
 err_config: []const u8 = "unable to parse config file",
-err_crawl: []const u8 = "failed to crawl session directories",
+err_console_dev: []const u8 = "failed to access console",
 err_dgn_oob: []const u8 = "log message",
 err_domain: []const u8 = "invalid domain",
 err_empty_password: []const u8 = "empty password not allowed",
 err_envlist: []const u8 = "failed to get envlist",
-err_get_active_tty: []const u8 = "failed to get active tty",
-err_hibernate: []const u8 = "failed to execute hibernate command",
 err_hostname: []const u8 = "failed to get hostname",
-err_inactivity: []const u8 = "failed to execute inactivity command",
-err_lock_state: []const u8 = "failed to get lock state",
-err_log: []const u8 = "failed to open log file",
 err_mlock: []const u8 = "failed to lock password memory",
 err_null: []const u8 = "null pointer",
 err_numlock: []const u8 = "failed to set numlock",
@@ -52,12 +43,8 @@ err_perm_group: []const u8 = "failed to downgrade group permissions",
 err_perm_user: []const u8 = "failed to downgrade user permissions",
 err_pwnam: []const u8 = "failed to get user info",
 err_sleep: []const u8 = "failed to execute sleep command",
-err_start: []const u8 = "failed to execute start command",
-err_battery: []const u8 = "failed to load battery status",
-err_switch_tty: []const u8 = "failed to switch tty",
 err_tty_ctrl: []const u8 = "tty control transfer failed",
-err_no_users: []const u8 = "no users found",
+err_unknown: []const u8 = "an unknown error occurred",
-err_uid_range: []const u8 = "failed to dynamically get uid range",
 err_user_gid: []const u8 = "failed to set user GID",
 err_user_init: []const u8 = "failed to initialize user",
 err_user_uid: []const u8 = "failed to set user UID",
@@ -65,15 +52,14 @@ err_xauth: []const u8 = "xauth command failed",
 err_xcb_conn: []const u8 = "xcb connection failed",
 err_xsessions_dir: []const u8 = "failed to find sessions folder",
 err_xsessions_open: []const u8 = "failed to open sessions folder",
-hibernate: []const u8 = "hibernate",
 insert: []const u8 = "insert",
-login: []const u8 = "login",
+login: []const u8 = "login:",
 logout: []const u8 = "logged out",
 no_x11_support: []const u8 = "x11 support disabled at compile-time",
 normal: []const u8 = "normal",
 numlock: []const u8 = "numlock",
 other: []const u8 = "other",
-password: []const u8 = "password",
+password: []const u8 = "password:",
 restart: []const u8 = "reboot",
 shell: [:0]const u8 = "shell",
 shutdown: []const u8 = "shutdown",

src/config/SavedUsers.zig

@@ -1,28 +0,0 @@
-const std = @import("std");
-
-const SavedUsers = @This();
-
-const User = struct {
-    username: []const u8,
-    session_index: usize,
-    first_run: bool,
-    allocated_username: bool,
-};
-
-user_list: std.ArrayList(User),
-last_username_index: ?usize,
-
-pub fn init() SavedUsers {
-    return .{
-        .user_list = .empty,
-        .last_username_index = null,
-    };
-}
-
-pub fn deinit(self: *SavedUsers, allocator: std.mem.Allocator) void {
-    for (self.user_list.items) |user| {
-        if (user.allocated_username) allocator.free(user.username);
-    }
-
-    self.user_list.deinit(allocator);
-}

src/config/migrator.zig

@@ -1,16 +1,9 @@
-// The migrator ensures compatibility with older configuration files
+// The migrator ensures compatibility with <=0.6.0 configuration files
-// Properties removed or changed since 0.6.0
-// Color codes interpreted differently since 1.1.0
 
 const std = @import("std");
 const ini = @import("zigini");
-const Config = @import("Config.zig");
+const Save = @import("Save.zig");
-const OldSave = @import("OldSave.zig");
+const enums = @import("../enums.zig");
-const SavedUsers = @import("SavedUsers.zig");
-const TerminalBuffer = @import("../tui/TerminalBuffer.zig");
-
-const Color = TerminalBuffer.Color;
-const Styling = TerminalBuffer.Styling;
 
 const color_properties = [_][]const u8{
     "bg",
@@ -23,10 +16,6 @@ const color_properties = [_][]const u8{
     "error_fg",
     "fg",
 };
-
-var set_color_properties =
-    [_]bool{ false, false, false, false, false, false, false, false, false };
-
 const removed_properties = [_][]const u8{
     "wayland_specifier",
     "max_desktop_len",
@@ -37,22 +26,22 @@ const removed_properties = [_][]const u8{
     "term_restore_cursor_cmd",
     "x_cmd_setup",
     "wayland_cmd",
-    "console_dev",
-    "load",
 };
 
 var temporary_allocator = std.heap.page_allocator;
-
+var buffer = std.mem.zeroes([10 * color_properties.len]u8);
-pub var auto_eight_colors: bool = true;
 
 pub var maybe_animate: ?bool = null;
 pub var maybe_save_file: ?[]const u8 = null;
 
+pub var mapped_config_fields = false;
+
 pub fn configFieldHandler(_: std.mem.Allocator, field: ini.IniField) ?ini.IniField {
     if (std.mem.eql(u8, field.key, "animate")) {
         // The option doesn't exist anymore, but we save its value for "animation"
         maybe_animate = std.mem.eql(u8, field.value, "true");
 
+        mapped_config_fields = true;
         return null;
     }
 
@@ -68,29 +57,19 @@ pub fn configFieldHandler(_: std.mem.Allocator, field: ini.IniField) ?ini.IniFie
             else => "none",
         };
 
+        mapped_config_fields = true;
         return mapped_field;
     }
 
-    inline for (color_properties, &set_color_properties) |property, *status| {
+    inline for (color_properties) |property| {
         if (std.mem.eql(u8, field.key, property)) {
-            // Color has been set; it won't be overwritten if we default to eight-color output
-            status.* = true;
-
             // These options now uses a 32-bit RGB value instead of an arbitrary 16-bit integer
-            // If they're all using eight-color codes, we start in eight-color mode
+            const color = std.fmt.parseInt(u16, field.value, 0) catch return field;
-            const color = std.fmt.parseInt(u16, field.value, 0) catch {
+            var mapped_field = field;
-                auto_eight_colors = false;
-                return field;
-            };
 
-            const color_no_styling = color & 0x00FF;
+            mapped_field.value = mapColor(color) catch return field;
-            const styling_only = color & 0xFF00;
+            mapped_config_fields = true;
-
+            return mapped_field;
-            // If color is "greater" than TB_WHITE, or the styling is "greater" than TB_DIM,
-            // we have an invalid color, so do not use eight-color mode
-            if (color_no_styling > 0x0008 or styling_only > 0x8000) auto_eight_colors = false;
-
-            return field;
         }
     }
 
@@ -99,6 +78,7 @@ pub fn configFieldHandler(_: std.mem.Allocator, field: ini.IniField) ?ini.IniFie
         var mapped_field = field;
         mapped_field.key = "clear_password";
 
+        mapped_config_fields = true;
         return mapped_field;
     }
 
@@ -114,6 +94,7 @@ pub fn configFieldHandler(_: std.mem.Allocator, field: ini.IniField) ?ini.IniFie
             else => "login",
         };
 
+        mapped_config_fields = true;
         return mapped_field;
     }
 
@@ -121,12 +102,14 @@ pub fn configFieldHandler(_: std.mem.Allocator, field: ini.IniField) ?ini.IniFie
         // The option doesn't exist anymore, but we save its value for migration later on
         maybe_save_file = temporary_allocator.dupe(u8, field.value) catch return null;
 
+        mapped_config_fields = true;
         return null;
     }
 
     inline for (removed_properties) |property| {
         if (std.mem.eql(u8, field.key, property)) {
             // The options don't exist anymore
+            mapped_config_fields = true;
             return null;
         }
     }
@@ -138,57 +121,28 @@ pub fn configFieldHandler(_: std.mem.Allocator, field: ini.IniField) ?ini.IniFie
 
         if (std.mem.eql(u8, field.value, "true")) {
             mapped_field.value = "en";
+            mapped_config_fields = true;
         } else if (std.mem.eql(u8, field.value, "false")) {
             mapped_field.value = "none";
+            mapped_config_fields = true;
         }
 
         return mapped_field;
     }
 
-    if (std.mem.eql(u8, field.key, "full_color")) {
-        // If color mode is defined, definitely don't set it automatically
-        auto_eight_colors = false;
-        return field;
-    }
-
     return field;
 }
 
 // This is the stuff we only handle after reading the config.
 // For example, the "animate" field could come after "animation"
-pub fn lateConfigFieldHandler(config: *Config) void {
+pub fn lateConfigFieldHandler(animation: *enums.Animation) void {
     if (maybe_animate) |animate| {
-        if (!animate) config.*.animation = .none;
+        if (!animate) animation.* = .none;
-    }
-
-    if (auto_eight_colors) {
-        // Valid config file predates true-color mode
-        // Will use eight-color output instead
-        config.full_color = false;
-
-        // We cannot rely on Config defaults when in eight-color mode,
-        // because they will appear as undesired colors.
-        // Instead set color properties to matching eight-color codes
-        config.doom_top_color = Color.ECOL_RED;
-        config.doom_middle_color = Color.ECOL_YELLOW;
-        config.doom_bottom_color = Color.ECOL_WHITE;
-        config.cmatrix_head_col = Styling.BOLD | Color.ECOL_WHITE;
-
-        // These may be in the config, so only change those which were not set
-        if (!set_color_properties[0]) config.bg = Color.DEFAULT;
-        if (!set_color_properties[1]) config.border_fg = Color.ECOL_WHITE;
-        if (!set_color_properties[2]) config.cmatrix_fg = Color.ECOL_GREEN;
-        if (!set_color_properties[3]) config.colormix_col1 = Color.ECOL_RED;
-        if (!set_color_properties[4]) config.colormix_col2 = Color.ECOL_BLUE;
-        if (!set_color_properties[5]) config.colormix_col3 = Color.ECOL_BLACK;
-        if (!set_color_properties[6]) config.error_bg = Color.DEFAULT;
-        if (!set_color_properties[7]) config.error_fg = Styling.BOLD | Color.ECOL_RED;
-        if (!set_color_properties[8]) config.fg = Color.ECOL_WHITE;
     }
 }
 
-pub fn tryMigrateFirstSaveFile(user_buf: *[32]u8) OldSave {
+pub fn tryMigrateSaveFile(user_buf: *[32]u8) Save {
-    var save = OldSave{};
+    var save = Save{};
 
     if (maybe_save_file) |path| {
         defer temporary_allocator.free(path);
@@ -196,21 +150,21 @@ pub fn tryMigrateFirstSaveFile(user_buf: *[32]u8) OldSave {
         var file = std.fs.openFileAbsolute(path, .{}) catch return save;
         defer file.close();
 
-        var file_buffer: [64]u8 = undefined;
+        const reader = file.reader();
-        var file_reader = file.reader(&file_buffer);
-        var reader = &file_reader.interface;
 
-        var user_writer = std.Io.Writer.fixed(user_buf);
+        var user_fbs = std.io.fixedBufferStream(user_buf);
-        var written = reader.streamDelimiter(&user_writer, '\n') catch return save;
+        reader.streamUntilDelimiter(user_fbs.writer(), '\n', user_buf.len) catch return save;
-        if (written > 0) save.user = user_buf[0..written];
+        const user = user_fbs.getWritten();
+        if (user.len > 0) save.user = user;
 
         var session_buf: [20]u8 = undefined;
-        var session_writer = std.Io.Writer.fixed(&session_buf);
+        var session_fbs = std.io.fixedBufferStream(&session_buf);
-        written = reader.streamDelimiter(&session_writer, '\n') catch return save;
+        reader.streamUntilDelimiter(session_fbs.writer(), '\n', session_buf.len) catch return save;
 
+        const session_index_str = session_fbs.getWritten();
         var session_index: ?usize = null;
-        if (written > 0) {
+        if (session_index_str.len > 0) {
-            session_index = std.fmt.parseUnsigned(usize, session_buf[0..written], 10) catch return save;
+            session_index = std.fmt.parseUnsigned(usize, session_index_str, 10) catch return save;
         }
         save.session_index = session_index;
     }
@@ -218,33 +172,32 @@ pub fn tryMigrateFirstSaveFile(user_buf: *[32]u8) OldSave {
     return save;
 }
 
-pub fn tryMigrateIniSaveFile(allocator: std.mem.Allocator, save_ini: *ini.Ini(OldSave), path: []const u8, saved_users: *SavedUsers, usernames: [][]const u8) !bool {
+fn mapColor(color: u16) ![]const u8 {
-    var old_save_file_exists = true;
+    const color_no_styling = color & 0x00FF;
+    const styling_only = color & 0xFF00;
 
-    var user_buf: [32]u8 = undefined;
+    // If color is "greater" than TB_WHITE, or the styling is "greater" than TB_DIM,
-    const save = save_ini.readFileToStruct(path, .{
+    // we have an invalid color, so return an error
-        .fieldHandler = null,
+    if (color_no_styling > 0x0008 or styling_only > 0x8000) return error.InvalidColor;
-        .comment_characters = "#",
+
-    }) catch no_save_file: {
+    var new_color: u32 = switch (color_no_styling) {
-        old_save_file_exists = false;
+        0x0000 => 0x00000000, // Default
-        break :no_save_file tryMigrateFirstSaveFile(&user_buf);
+        0x0001 => 0x20000000, // "Hi-black" styling
+        0x0002 => 0x00FF0000, // Red
+        0x0003 => 0x0000FF00, // Green
+        0x0004 => 0x00FFFF00, // Yellow
+        0x0005 => 0x000000FF, // Blue
+        0x0006 => 0x00FF00FF, // Magenta
+        0x0007 => 0x0000FFFF, // Cyan
+        0x0008 => 0x00FFFFFF, // White
+        else => unreachable,
     };
 
-    if (!old_save_file_exists) return false;
+    // Only applying styling if color isn't black and styling isn't also black
-
+    if (!(new_color == 0x20000000 and styling_only == 0x20000000)) {
-    // Add all other users to the list
+        // Shift styling by 16 to the left to apply it to the new 32-bit color
-    for (usernames, 0..) |username, i| {
+        new_color |= @as(u32, @intCast(styling_only)) << 16;
-        if (save.user) |user| {
-            if (std.mem.eql(u8, user, username)) saved_users.last_username_index = i;
-        }
-
-        try saved_users.user_list.append(allocator, .{
-            .username = username,
-            .session_index = save.session_index orelse 0,
-            .first_run = false,
-            .allocated_username = false,
-        });
     }
 
-    return true;
+    return try std.fmt.bufPrint(&buffer, "0x{X}", .{new_color});
 }

src/enums.zig

@@ -1,11 +1,8 @@
-const std = @import("std");
 pub const Animation = enum {
     none,
     doom,
     matrix,
     colormix,
-    gameoflife,
-    dur_file,
 };
 
 pub const DisplayServer = enum {
@@ -13,7 +10,6 @@ pub const DisplayServer = enum {
     shell,
     xinitrc,
     x11,
-    custom,
 };
 
 pub const Input = enum {
@@ -21,26 +17,6 @@ pub const Input = enum {
     session,
     login,
     password,
-
-    /// Moves the current Input forwards by one entry. If `reverse`, then the Input
-    /// moves backwards. If `wrap` is true, then the entry will wrap back around
-    pub fn move(self: *Input, reverse: bool, wrap: bool) void {
-        const maxNum = @typeInfo(Input).@"enum".fields.len - 1;
-        const selfNum = @intFromEnum(self.*);
-        if (reverse) {
-            if (wrap) {
-                self.* = @enumFromInt(selfNum -% 1);
-            } else if (selfNum != 0) {
-                self.* = @enumFromInt(selfNum - 1);
-            }
-        } else {
-            if (wrap) {
-                self.* = @enumFromInt(selfNum +% 1);
-            } else if (selfNum != maxNum) {
-                self.* = @enumFromInt(selfNum + 1);
-            }
-        }
-    }
 };
 
 pub const ViMode = enum {

src/interop.zig

@@ -1,6 +1,6 @@
 const std = @import("std");
 const builtin = @import("builtin");
-const UidRange = @import("UidRange.zig");
+const Allocator = std.mem.Allocator;
 
 pub const termbox = @import("termbox2");
 
@@ -17,271 +17,53 @@ pub const xcb = @cImport({
     @cInclude("xcb/xcb.h");
 });
 
-const pwd = @cImport({
+pub const unistd = @cImport({
-    @cInclude("pwd.h");
-    // We include a FreeBSD-specific header here since login_cap.h references
-    // the passwd struct directly, so we can't import it separately
-    if (builtin.os.tag == .freebsd) {
-        @cInclude("sys/types.h");
-        @cInclude("login_cap.h");
-    }
-});
-
-const stdlib = @cImport({
-    @cInclude("stdlib.h");
-});
-
-const unistd = @cImport({
     @cInclude("unistd.h");
 });
 
-const grp = @cImport({
+pub const time = @cImport({
-    @cInclude("grp.h");
-});
-
-const system_time = @cImport({
-    @cInclude("sys/time.h");
-});
-
-const time = @cImport({
     @cInclude("time.h");
 });
 
-pub const TimeOfDay = struct {
+pub const system_time = @cImport({
-    seconds: i64,
+    @cInclude("sys/time.h");
-    microseconds: i64,
+});
-};
 
-pub const UsernameEntry = struct {
+pub const stdlib = @cImport({
-    username: ?[]const u8,
+    @cInclude("stdlib.h");
-    uid: std.posix.uid_t,
+});
-    gid: std.posix.gid_t,
-    home: ?[]const u8,
-    shell: ?[]const u8,
-    passwd_struct: [*c]pwd.passwd,
-};
 
-// Contains the platform-specific code
+pub const pwd = @cImport({
-fn PlatformStruct() type {
+    @cInclude("pwd.h");
-    return switch (builtin.os.tag) {
+    // We include a FreeBSD-specific header here since login_cap.h references
-        .linux => struct {
+    // the passwd struct directly, so we can't import it separately'
-            pub const kd = @cImport({
+    if (builtin.os.tag == .freebsd) @cInclude("login_cap.h");
-                @cInclude("sys/kd.h");
+});
-            });
 
-            pub const vt = @cImport({
+pub const grp = @cImport({
-                @cInclude("sys/vt.h");
+    @cInclude("grp.h");
-            });
+});
 
-            pub const LedState = c_char;
+// BSD-specific headers
-            pub const get_led_state = kd.KDGKBLED;
+pub const kbio = @cImport({
-            pub const set_led_state = kd.KDSKBLED;
+    @cInclude("sys/kbio.h");
-            pub const numlock_led = kd.K_NUMLOCK;
+});
-            pub const capslock_led = kd.K_CAPSLOCK;
-            pub const vt_activate = vt.VT_ACTIVATE;
-            pub const vt_waitactive = vt.VT_WAITACTIVE;
 
-            const SYSTEMD_HOMED_UID_MIN = 60001;
+// Linux-specific headers
-            const SYSTEMD_HOMED_UID_MAX = 60513;
+pub const kd = @cImport({
+    @cInclude("sys/kd.h");
+});
 
-            pub fn setUserContextImpl(username: [*:0]const u8, entry: UsernameEntry) !void {
+pub const vt = @cImport({
-                const status = grp.initgroups(username, @intCast(entry.gid));
+    @cInclude("sys/vt.h");
-                if (status != 0) return error.GroupInitializationFailed;
+});
 
-                std.posix.setgid(@intCast(entry.gid)) catch return error.SetUserGidFailed;
+// Used for getting & setting the lock state
-                std.posix.setuid(@intCast(entry.uid)) catch return error.SetUserUidFailed;
+const LedState = if (builtin.os.tag.isBSD()) c_int else c_char;
-            }
+const get_led_state = if (builtin.os.tag.isBSD()) kbio.KDGETLED else kd.KDGKBLED;
-
+const set_led_state = if (builtin.os.tag.isBSD()) kbio.KDSETLED else kd.KDSKBLED;
-            // Procedure:
+const numlock_led = if (builtin.os.tag.isBSD()) kbio.LED_NUM else kd.K_NUMLOCK;
-            // 1. Open /proc/self/stat to retrieve the tty_nr field
+const capslock_led = if (builtin.os.tag.isBSD()) kbio.LED_CAP else kd.K_CAPSLOCK;
-            // 2. Parse the tty_nr field to extract the major and minor device
-            //    numbers
-            // 3. Then, read every /sys/class/tty/[dir]/dev, where [dir] is
-            //    every sub-directory
-            // 4. Finally, compare the major and minor device numbers with the
-            //    extracted values. If they correspond, parse [dir] to get the
-            //    TTY ID
-            pub fn getActiveTtyImpl(allocator: std.mem.Allocator) !u8 {
-                var file_buffer: [256]u8 = undefined;
-                var tty_major: u16 = undefined;
-                var tty_minor: u16 = undefined;
-
-                {
-                    var file = try std.fs.openFileAbsolute("/proc/self/stat", .{});
-                    defer file.close();
-
-                    var reader = file.reader(&file_buffer);
-                    var buffer: [1024]u8 = undefined;
-                    const read = try readBuffer(&reader.interface, &buffer);
-
-                    var iterator = std.mem.splitScalar(u8, buffer[0..read], ' ');
-                    var fields: [52][]const u8 = undefined;
-                    var index: usize = 0;
-
-                    while (iterator.next()) |field| {
-                        fields[index] = field;
-                        index += 1;
-                    }
-
-                    const tty_nr = try std.fmt.parseInt(u16, fields[6], 10);
-                    tty_major = tty_nr / 256;
-                    tty_minor = tty_nr % 256;
-                }
-
-                var directory = try std.fs.openDirAbsolute("/sys/class/tty", .{ .iterate = true });
-                defer directory.close();
-
-                var iterator = directory.iterate();
-                while (try iterator.next()) |entry| {
-                    const path = try std.fmt.allocPrint(allocator, "/sys/class/tty/{s}/dev", .{entry.name});
-                    defer allocator.free(path);
-
-                    var file = try std.fs.openFileAbsolute(path, .{});
-                    defer file.close();
-
-                    var reader = file.reader(&file_buffer);
-                    var buffer: [16]u8 = undefined;
-                    const read = try readBuffer(&reader.interface, &buffer);
-
-                    var device_iterator = std.mem.splitScalar(u8, buffer[0..(read - 1)], ':');
-                    const device_major_str = device_iterator.next() orelse continue;
-                    const device_minor_str = device_iterator.next() orelse continue;
-
-                    const device_major = try std.fmt.parseInt(u8, device_major_str, 10);
-                    const device_minor = try std.fmt.parseInt(u8, device_minor_str, 10);
-
-                    if (device_major == tty_major and device_minor == tty_minor) {
-                        const tty_id_str = entry.name["tty".len..];
-                        return try std.fmt.parseInt(u8, tty_id_str, 10);
-                    }
-                }
-
-                return error.NoTtyFound;
-            }
-
-            // This is very bad parsing, but we only need to get 2 values..
-            // and the format of the file seems to be standard? So this should
-            // be fine...
-            pub fn getUserIdRange(allocator: std.mem.Allocator, file_path: []const u8) !UidRange {
-                const login_defs_file = try std.fs.cwd().openFile(file_path, .{});
-                defer login_defs_file.close();
-
-                const login_defs_buffer = try login_defs_file.readToEndAlloc(allocator, std.math.maxInt(u16));
-                defer allocator.free(login_defs_buffer);
-
-                var iterator = std.mem.splitScalar(u8, login_defs_buffer, '\n');
-                var uid_range = UidRange{};
-                var nameFound = false;
-
-                while (iterator.next()) |line| {
-                    const trimmed_line = std.mem.trim(u8, line, " \n\r\t");
-
-                    if (std.mem.startsWith(u8, trimmed_line, "UID_MIN")) {
-                        uid_range.uid_min = try parseValue(std.posix.uid_t, "UID_MIN", trimmed_line);
-                        nameFound = true;
-                    } else if (std.mem.startsWith(u8, trimmed_line, "UID_MAX")) {
-                        uid_range.uid_max = try parseValue(std.posix.uid_t, "UID_MAX", trimmed_line);
-                        nameFound = true;
-                    }
-                }
-
-                if (!nameFound) return error.UidNameNotFound;
-
-                // This code assumes the OS has a login.defs file with UID_MIN
-                // and UID_MAX values defined in it, which should be the case
-                // for most systemd-based Linux distributions out there.
-                // This should be a good enough safeguard for now, as there's
-                // no reliable (and clean) way to check for systemd support
-                if (uid_range.uid_min > SYSTEMD_HOMED_UID_MIN) {
-                    uid_range.uid_min = SYSTEMD_HOMED_UID_MIN;
-                }
-
-                if (uid_range.uid_max < SYSTEMD_HOMED_UID_MAX) {
-                    uid_range.uid_max = SYSTEMD_HOMED_UID_MAX;
-                }
-
-                return uid_range;
-            }
-
-            fn parseValue(comptime T: type, name: []const u8, buffer: []const u8) !T {
-                var iterator = std.mem.splitAny(u8, buffer, " \t");
-                var maybe_value: ?T = null;
-
-                while (iterator.next()) |slice| {
-                    // Skip the slice if it's empty (whitespace) or is the name of the
-                    // property (e.g. UID_MIN or UID_MAX)
-                    if (slice.len == 0 or std.mem.eql(u8, slice, name)) continue;
-                    maybe_value = std.fmt.parseInt(T, slice, 10) catch continue;
-                }
-
-                return maybe_value orelse error.ValueNotFound;
-            }
-
-            fn readBuffer(reader: *std.Io.Reader, buffer: []u8) !usize {
-                var bytes_read: usize = 0;
-                var byte: u8 = try reader.takeByte();
-
-                while (byte != 0 and bytes_read < buffer.len) {
-                    buffer[bytes_read] = byte;
-                    bytes_read += 1;
-                    byte = reader.takeByte() catch break;
-                }
-
-                return bytes_read;
-            }
-        },
-        .freebsd => struct {
-            pub const kbio = @cImport({
-                @cInclude("sys/kbio.h");
-            });
-
-            pub const consio = @cImport({
-                @cInclude("sys/consio.h");
-            });
-
-            pub const LedState = c_int;
-            pub const get_led_state = kbio.KDGETLED;
-            pub const set_led_state = kbio.KDSETLED;
-            pub const numlock_led = kbio.LED_NUM;
-            pub const capslock_led = kbio.LED_CAP;
-            pub const vt_activate = consio.VT_ACTIVATE;
-            pub const vt_waitactive = consio.VT_WAITACTIVE;
-
-            const FREEBSD_UID_MIN = 1000;
-            const FREEBSD_UID_MAX = 32000;
-
-            pub fn setUserContextImpl(username: [*:0]const u8, entry: UsernameEntry) !void {
-                // FreeBSD has initgroups() in unistd
-                const status = unistd.initgroups(username, @intCast(entry.gid));
-                if (status != 0) return error.GroupInitializationFailed;
-
-                // FreeBSD sets the GID and UID with setusercontext()
-                const result = pwd.setusercontext(null, entry.passwd_struct, @intCast(entry.uid), pwd.LOGIN_SETALL);
-                if (result != 0) return error.SetUserUidFailed;
-            }
-
-            pub fn getActiveTtyImpl(_: std.mem.Allocator) !u8 {
-                return error.FeatureUnimplemented;
-            }
-
-            pub fn getUserIdRange(_: std.mem.Allocator, _: []const u8) !UidRange {
-                return .{
-                    // Hardcoded default values chosen from
-                    // /usr/src/usr.sbin/pw/pw_conf.c
-                    .uid_min = FREEBSD_UID_MIN,
-                    .uid_max = FREEBSD_UID_MAX,
-                };
-            }
-        },
-        else => @compileError("Unsupported target: " ++ builtin.os.tag),
-    };
-}
-
-const platform_struct = PlatformStruct();
-
-pub fn supportsUnicode() bool {
-    return builtin.os.tag == .linux or builtin.os.tag == .freebsd;
-}
 
 pub fn timeAsString(buf: [:0]u8, format: [:0]const u8) []u8 {
     const timer = std.time.timestamp();
@@ -291,122 +73,37 @@ pub fn timeAsString(buf: [:0]u8, format: [:0]const u8) []u8 {
     return buf[0..len];
 }
 
-pub fn getTimeOfDay() !TimeOfDay {
+pub fn switchTty(console_dev: []const u8, tty: u8) !void {
-    var tv: system_time.timeval = undefined;
+    const fd = try std.posix.open(console_dev, .{ .ACCMODE = .WRONLY }, 0);
-    const status = system_time.gettimeofday(&tv, null);
+    defer std.posix.close(fd);
 
-    if (status != 0) return error.FailedToGetTimeOfDay;
+    _ = std.c.ioctl(fd, vt.VT_ACTIVATE, tty);
-
+    _ = std.c.ioctl(fd, vt.VT_WAITACTIVE, tty);
-    return .{
-        .seconds = @intCast(tv.tv_sec),
-        .microseconds = @intCast(tv.tv_usec),
-    };
 }
 
-pub fn getActiveTty(allocator: std.mem.Allocator) !u8 {
+pub fn getLockState(console_dev: []const u8) !struct {
-    return platform_struct.getActiveTtyImpl(allocator);
-}
-
-pub fn switchTty(tty: u8) !void {
-    var status = std.c.ioctl(std.posix.STDIN_FILENO, platform_struct.vt_activate, tty);
-    if (status != 0) return error.FailedToActivateTty;
-
-    status = std.c.ioctl(std.posix.STDIN_FILENO, platform_struct.vt_waitactive, tty);
-    if (status != 0) return error.FailedToWaitForActiveTty;
-}
-
-pub fn getLockState() !struct {
     numlock: bool,
     capslock: bool,
 } {
-    var led: platform_struct.LedState = undefined;
+    const fd = try std.posix.open(console_dev, .{ .ACCMODE = .RDONLY }, 0);
-    const status = std.c.ioctl(std.posix.STDIN_FILENO, platform_struct.get_led_state, &led);
+    defer std.posix.close(fd);
-    if (status != 0) return error.FailedToGetLockState;
+
+    var led: LedState = undefined;
+    _ = std.c.ioctl(fd, get_led_state, &led);
 
     return .{
-        .numlock = (led & platform_struct.numlock_led) != 0,
+        .numlock = (led & numlock_led) != 0,
-        .capslock = (led & platform_struct.capslock_led) != 0,
+        .capslock = (led & capslock_led) != 0,
     };
 }
 
 pub fn setNumlock(val: bool) !void {
-    var led: platform_struct.LedState = undefined;
+    var led: LedState = undefined;
-    var status = std.c.ioctl(std.posix.STDIN_FILENO, platform_struct.get_led_state, &led);
+    _ = std.c.ioctl(0, get_led_state, &led);
-    if (status != 0) return error.FailedToGetNumlock;
 
-    const numlock = (led & platform_struct.numlock_led) != 0;
+    const numlock = (led & numlock_led) != 0;
     if (numlock != val) {
-        status = std.c.ioctl(std.posix.STDIN_FILENO, platform_struct.set_led_state, led ^ platform_struct.numlock_led);
+        const status = std.c.ioctl(std.posix.STDIN_FILENO, set_led_state, led ^ numlock_led);
         if (status != 0) return error.FailedToSetNumlock;
     }
 }
-
-pub fn setUserContext(allocator: std.mem.Allocator, entry: UsernameEntry) !void {
-    const username_z = try allocator.dupeZ(u8, entry.username.?);
-    defer allocator.free(username_z);
-
-    return platform_struct.setUserContextImpl(username_z.ptr, entry);
-}
-
-pub fn setUserShell(entry: *UsernameEntry) void {
-    unistd.setusershell();
-
-    const shell = unistd.getusershell();
-    entry.shell = std.mem.span(shell);
-
-    unistd.endusershell();
-}
-
-pub fn setEnvironmentVariable(allocator: std.mem.Allocator, name: []const u8, value: []const u8, replace: bool) !void {
-    const name_z = try allocator.dupeZ(u8, name);
-    defer allocator.free(name_z);
-
-    const value_z = try allocator.dupeZ(u8, value);
-    defer allocator.free(value_z);
-
-    const status = stdlib.setenv(name_z.ptr, value_z.ptr, @intFromBool(replace));
-    if (status != 0) return error.SetEnvironmentVariableFailed;
-}
-
-pub fn putEnvironmentVariable(name_and_value: [*c]u8) !void {
-    const status = stdlib.putenv(name_and_value);
-    if (status != 0) return error.PutEnvironmentVariableFailed;
-}
-
-pub fn getNextUsernameEntry() ?UsernameEntry {
-    const entry = pwd.getpwent();
-    if (entry == null) return null;
-
-    return .{
-        .username = if (entry.*.pw_name) |name| std.mem.span(name) else null,
-        .uid = @intCast(entry.*.pw_uid),
-        .gid = @intCast(entry.*.pw_gid),
-        .home = if (entry.*.pw_dir) |dir| std.mem.span(dir) else null,
-        .shell = if (entry.*.pw_shell) |shell| std.mem.span(shell) else null,
-        .passwd_struct = entry,
-    };
-}
-
-pub fn getUsernameEntry(username: [:0]const u8) ?UsernameEntry {
-    const entry = pwd.getpwnam(username);
-    if (entry == null) return null;
-
-    return .{
-        .username = if (entry.*.pw_name) |name| std.mem.span(name) else null,
-        .uid = @intCast(entry.*.pw_uid),
-        .gid = @intCast(entry.*.pw_gid),
-        .home = if (entry.*.pw_dir) |dir| std.mem.span(dir) else null,
-        .shell = if (entry.*.pw_shell) |shell| std.mem.span(shell) else null,
-        .passwd_struct = entry,
-    };
-}
-
-pub fn closePasswordDatabase() void {
-    pwd.endpwent();
-}
-
-// This is very bad parsing, but we only need to get 2 values... and the format
-// of the file doesn't seem to be standard? So this should be fine...
-pub fn getUserIdRange(allocator: std.mem.Allocator, file_path: []const u8) !UidRange {
-    return platform_struct.getUserIdRange(allocator, file_path);
-}

src/tui/TerminalBuffer.zig

@@ -1,4 +1,5 @@
 const std = @import("std");
+const builtin = @import("builtin");
 const interop = @import("../interop.zig");
 const Cell = @import("Cell.zig");
 
@@ -30,29 +31,14 @@ pub const Styling = struct {
 
 pub const Color = struct {
     pub const DEFAULT = 0x00000000;
-    pub const TRUE_BLACK = Styling.HI_BLACK;
+    pub const BLACK = Styling.HI_BLACK;
-    pub const TRUE_RED = 0x00FF0000;
+    pub const RED = 0x00FF0000;
-    pub const TRUE_GREEN = 0x0000FF00;
+    pub const GREEN = 0x0000FF00;
-    pub const TRUE_YELLOW = 0x00FFFF00;
+    pub const YELLOW = 0x00FFFF00;
-    pub const TRUE_BLUE = 0x000000FF;
+    pub const BLUE = 0x000000FF;
-    pub const TRUE_MAGENTA = 0x00FF00FF;
+    pub const MAGENTA = 0x00FF00FF;
-    pub const TRUE_CYAN = 0x0000FFFF;
+    pub const CYAN = 0x0000FFFF;
-    pub const TRUE_WHITE = 0x00FFFFFF;
+    pub const WHITE = 0x00FFFFFF;
-    pub const TRUE_DIM_RED = 0x00800000;
-    pub const TRUE_DIM_GREEN = 0x00008000;
-    pub const TRUE_DIM_YELLOW = 0x00808000;
-    pub const TRUE_DIM_BLUE = 0x00000080;
-    pub const TRUE_DIM_MAGENTA = 0x00800080;
-    pub const TRUE_DIM_CYAN = 0x00008080;
-    pub const TRUE_DIM_WHITE = 0x00C0C0C0;
-    pub const ECOL_BLACK = 1;
-    pub const ECOL_RED = 2;
-    pub const ECOL_GREEN = 3;
-    pub const ECOL_YELLOW = 4;
-    pub const ECOL_BLUE = 5;
-    pub const ECOL_MAGENTA = 6;
-    pub const ECOL_CYAN = 7;
-    pub const ECOL_WHITE = 8;
 };
 
 random: Random,
@@ -88,7 +74,7 @@ pub fn init(options: InitOptions, labels_max_length: usize, random: Random) Term
         .fg = options.fg,
         .bg = options.bg,
         .border_fg = options.border_fg,
-        .box_chars = if (interop.supportsUnicode()) .{
+        .box_chars = if (builtin.os.tag == .linux or builtin.os.tag.isBSD()) .{
             .left_up = 0x250C,
             .left_down = 0x2514,
             .right_up = 0x2510,
@@ -124,28 +110,24 @@ pub fn cascade(self: TerminalBuffer) bool {
 
     while (y > 0) : (y -= 1) {
         for (0..self.width) |x| {
-            var cell: ?*termbox.tb_cell = undefined;
+            var cell: termbox.tb_cell = undefined;
-            var cell_under: ?*termbox.tb_cell = undefined;
+            var cell_under: termbox.tb_cell = undefined;
 
             _ = termbox.tb_get_cell(@intCast(x), @intCast(y - 1), 1, &cell);
             _ = termbox.tb_get_cell(@intCast(x), @intCast(y), 1, &cell_under);
 
-            // This shouldn't happen under normal circumstances, but because
+            const char: u8 = @truncate(cell.ch);
-            // this is a *secret* animation, there's no need to care that much
-            if (cell == null or cell_under == null) continue;
-
-            const char: u8 = @truncate(cell.?.ch);
             if (std.ascii.isWhitespace(char)) continue;
 
-            const char_under: u8 = @truncate(cell_under.?.ch);
+            const char_under: u8 = @truncate(cell_under.ch);
             if (!std.ascii.isWhitespace(char_under)) continue;
 
             changed = true;
 
             if ((self.random.int(u16) % 10) > 7) continue;
 
-            _ = termbox.tb_set_cell(@intCast(x), @intCast(y), cell.?.ch, cell.?.fg, cell.?.bg);
+            _ = termbox.tb_set_cell(@intCast(x), @intCast(y), cell.ch, cell.fg, cell.bg);
-            _ = termbox.tb_set_cell(@intCast(x), @intCast(y - 1), ' ', cell_under.?.fg, cell_under.?.bg);
+            _ = termbox.tb_set_cell(@intCast(x), @intCast(y - 1), ' ', cell_under.fg, cell_under.bg);
         }
     }
 
@@ -238,7 +220,7 @@ pub fn drawConfinedLabel(self: TerminalBuffer, text: []const u8, x: usize, y: us
 
     var i: c_int = @intCast(x);
     while (utf8.nextCodepoint()) |codepoint| : (i += termbox.tb_wcwidth(codepoint)) {
-        if (i - @as(c_int, @intCast(x)) >= max_length) break;
+        if (i >= max_length) break;
         _ = termbox.tb_set_cell(i, yc, codepoint, self.fg, self.bg);
     }
 }
@@ -255,6 +237,5 @@ pub fn strWidth(str: []const u8) !u8 {
     var utf8 = utf8view.iterator();
     var i: c_int = 0;
     while (utf8.nextCodepoint()) |codepoint| i += termbox.tb_wcwidth(codepoint);
-
     return @intCast(i);
 }

src/tui/components/InfoLine.zig

@@ -4,7 +4,7 @@ const generic = @import("generic.zig");
 
 const Allocator = std.mem.Allocator;
 
-const MessageLabel = generic.CyclableLabel(Message, Message);
+const MessageLabel = generic.CyclableLabel(Message);
 
 const InfoLine = @This();
 
@@ -19,7 +19,7 @@ label: MessageLabel,
 
 pub fn init(allocator: Allocator, buffer: *TerminalBuffer) InfoLine {
     return .{
-        .label = MessageLabel.init(allocator, buffer, drawItem, null, null),
+        .label = MessageLabel.init(allocator, buffer, drawItem),
     };
 }
 

src/tui/components/Session.zig

@@ -1,66 +1,46 @@
 const std = @import("std");
 const TerminalBuffer = @import("../TerminalBuffer.zig");
 const enums = @import("../../enums.zig");
+const ini = @import("zigini");
 const Environment = @import("../../Environment.zig");
 const generic = @import("generic.zig");
-const UserList = @import("UserList.zig");
 
 const Allocator = std.mem.Allocator;
 const DisplayServer = enums.DisplayServer;
-
+const Ini = ini.Ini;
-const Env = struct {
+const EnvironmentLabel = generic.CyclableLabel(Environment);
-    environment: Environment,
-    index: usize,
-};
-const EnvironmentLabel = generic.CyclableLabel(Env, *UserList);
 
 const Session = @This();
 
 label: EnvironmentLabel,
-user_list: *UserList,
 
-pub fn init(allocator: Allocator, buffer: *TerminalBuffer, user_list: *UserList) Session {
+pub fn init(allocator: Allocator, buffer: *TerminalBuffer) Session {
     return .{
-        .label = EnvironmentLabel.init(allocator, buffer, drawItem, sessionChanged, user_list),
+        .label = EnvironmentLabel.init(allocator, buffer, drawItem),
-        .user_list = user_list,
     };
 }
 
 pub fn deinit(self: *Session) void {
-    for (self.label.list.items) |*env| {
+    for (self.label.list.items) |*environment| {
-        if (env.environment.entry_ini) |*entry_ini| entry_ini.deinit();
+        if (environment.entry_ini) |*entry_ini| entry_ini.deinit();
-        if (env.environment.xdg_session_desktop_owned) {
+        if (environment.xdg_session_desktop) |session_desktop| self.label.allocator.free(session_desktop);
-            self.label.allocator.free(env.environment.xdg_session_desktop.?);
-        }
     }
 
     self.label.deinit();
 }
 
 pub fn addEnvironment(self: *Session, environment: Environment) !void {
-    const env = Env{ .environment = environment, .index = self.label.list.items.len };
+    try self.label.addItem(environment);
-
-    try self.label.addItem(env);
-    sessionChanged(env, self.user_list);
 }
 
-fn sessionChanged(env: Env, maybe_user_list: ?*UserList) void {
+fn drawItem(label: *EnvironmentLabel, environment: Environment, x: usize, y: usize) bool {
-    if (maybe_user_list) |user_list| {
+    const length = @min(environment.name.len, label.visible_length - 3);
-        const user = user_list.label.list.items[user_list.label.current];
-        if (!user.first_run) return;
-
-        user.session_index.* = env.index;
-    }
-}
-
-fn drawItem(label: *EnvironmentLabel, env: Env, x: usize, y: usize) bool {
-    const length = @min(env.environment.name.len, label.visible_length - 3);
     if (length == 0) return false;
 
-    const nx = if (label.text_in_center) (label.x + (label.visible_length - env.environment.name.len) / 2) else (label.x + 2);
+    const nx = if (label.text_in_center) (label.x + (label.visible_length - environment.name.len) / 2) else (label.x + 2);
-    label.first_char_x = nx + env.environment.name.len;
+    label.first_char_x = nx + environment.name.len;
 
-    label.buffer.drawLabel(env.environment.specifier, x, y);
+    label.buffer.drawLabel(environment.specifier, x, y);
-    label.buffer.drawLabel(env.environment.name, nx, label.y);
+    label.buffer.drawLabel(environment.name, nx, label.y);
     return true;
 }

src/tui/components/UserList.zig

@@ -1,88 +0,0 @@
-const std = @import("std");
-const TerminalBuffer = @import("../TerminalBuffer.zig");
-const generic = @import("generic.zig");
-const Session = @import("Session.zig");
-const SavedUsers = @import("../../config/SavedUsers.zig");
-
-const StringList = std.ArrayListUnmanaged([]const u8);
-const Allocator = std.mem.Allocator;
-
-pub const User = struct {
-    name: []const u8,
-    session_index: *usize,
-    allocated_index: bool,
-    first_run: bool,
-};
-const UserLabel = generic.CyclableLabel(User, *Session);
-
-const UserList = @This();
-
-label: UserLabel,
-
-pub fn init(allocator: Allocator, buffer: *TerminalBuffer, usernames: StringList, saved_users: *SavedUsers, session: *Session) !UserList {
-    var userList = UserList{
-        .label = UserLabel.init(allocator, buffer, drawItem, usernameChanged, session),
-    };
-
-    for (usernames.items) |username| {
-        if (username.len == 0) continue;
-
-        var maybe_session_index: ?*usize = null;
-        var first_run = true;
-        for (saved_users.user_list.items) |*saved_user| {
-            if (std.mem.eql(u8, username, saved_user.username)) {
-                maybe_session_index = &saved_user.session_index;
-                first_run = saved_user.first_run;
-                break;
-            }
-        }
-
-        var allocated_index = false;
-        if (maybe_session_index == null) {
-            maybe_session_index = try allocator.create(usize);
-            maybe_session_index.?.* = 0;
-            allocated_index = true;
-        }
-
-        try userList.label.addItem(.{
-            .name = username,
-            .session_index = maybe_session_index.?,
-            .allocated_index = allocated_index,
-            .first_run = first_run,
-        });
-    }
-
-    return userList;
-}
-
-pub fn deinit(self: *UserList) void {
-    for (self.label.list.items) |user| {
-        if (user.allocated_index) {
-            self.label.allocator.destroy(user.session_index);
-        }
-    }
-
-    self.label.deinit();
-}
-
-pub fn getCurrentUsername(self: UserList) []const u8 {
-    return self.label.list.items[self.label.current].name;
-}
-
-fn usernameChanged(user: User, maybe_session: ?*Session) void {
-    if (maybe_session) |session| {
-        if (user.session_index.* >= session.label.list.items.len) return;
-        session.label.current = user.session_index.*;
-    }
-}
-
-fn drawItem(label: *UserLabel, user: User, _: usize, _: usize) bool {
-    const length = @min(user.name.len, label.visible_length - 3);
-    if (length == 0) return false;
-
-    const x = if (label.text_in_center) (label.x + (label.visible_length - user.name.len) / 2) else (label.x + 2);
-    label.first_char_x = x + user.name.len;
-
-    label.buffer.drawLabel(user.name, x, label.y);
-    return true;
-}

src/tui/components/generic.zig

@@ -2,12 +2,11 @@ const std = @import("std");
 const interop = @import("../../interop.zig");
 const TerminalBuffer = @import("../TerminalBuffer.zig");
 
-pub fn CyclableLabel(comptime ItemType: type, comptime ChangeItemType: type) type {
+pub fn CyclableLabel(comptime ItemType: type) type {
     return struct {
         const Allocator = std.mem.Allocator;
         const ItemList = std.ArrayListUnmanaged(ItemType);
         const DrawItemFn = *const fn (*Self, ItemType, usize, usize) bool;
-        const ChangeItemFn = *const fn (ItemType, ?ChangeItemType) void;
 
         const termbox = interop.termbox;
 
@@ -23,10 +22,8 @@ pub fn CyclableLabel(comptime ItemType: type, comptime ChangeItemType: type) typ
         first_char_x: usize,
         text_in_center: bool,
         draw_item_fn: DrawItemFn,
-        change_item_fn: ?ChangeItemFn,
-        change_item_arg: ?ChangeItemType,
 
-        pub fn init(allocator: Allocator, buffer: *TerminalBuffer, draw_item_fn: DrawItemFn, change_item_fn: ?ChangeItemFn, change_item_arg: ?ChangeItemType) Self {
+        pub fn init(allocator: Allocator, buffer: *TerminalBuffer, draw_item_fn: DrawItemFn) Self {
             return .{
                 .allocator = allocator,
                 .buffer = buffer,
@@ -38,8 +35,6 @@ pub fn CyclableLabel(comptime ItemType: type, comptime ChangeItemType: type) typ
                 .first_char_x = 0,
                 .text_in_center = false,
                 .draw_item_fn = draw_item_fn,
-                .change_item_fn = change_item_fn,
-                .change_item_arg = change_item_arg,
             };
         }
 
@@ -99,19 +94,21 @@ pub fn CyclableLabel(comptime ItemType: type, comptime ChangeItemType: type) typ
         }
 
         fn goLeft(self: *Self) void {
-            self.current = if (self.current == 0) self.list.items.len - 1 else self.current - 1;
+            if (self.current == 0) {
-
+                self.current = self.list.items.len - 1;
-            if (self.change_item_fn) |change_item_fn| {
+                return;
-                @call(.auto, change_item_fn, .{ self.list.items[self.current], self.change_item_arg });
             }
+
+            self.current -= 1;
         }
 
         fn goRight(self: *Self) void {
-            self.current = if (self.current == self.list.items.len - 1) 0 else self.current + 1;
+            if (self.current == self.list.items.len - 1) {
-
+                self.current = 0;
-            if (self.change_item_fn) |change_item_fn| {
+                return;
-                @call(.auto, change_item_fn, .{ self.list.items[self.current], self.change_item_arg });
             }
+
+            self.current += 1;
         }
     };
 }