Stop generating these files. They are currently only used by virt-v2v
-o qemu mode, and there are better ways to locate the UEFI files
there.
Update the common submodule to bring in:
Richard W.M. Jones (5):
mlcustomize: Add heuristic support for Windows Server 2025
mlcustomize/customize_run.ml: Move 'in' to new line
mlstdutils/guestfs_config: Define host_os
mlcustomize, mltools: Check guest OS is compatible before allowing --run
Remove mlv2v/ subdirectory
dhcpcd fails to update /etc/resolv.conf if is a dangling symlink, so remove it
if it is.
This happens on Arch Linux when systemd-resolved is enabled by symlinking
/etc/resolv.conf to /run/systemd/resolve/stub-resolv.conf. The symlink is copied
into the supermin appliance, but the target file is not and this causes dhcpcd to
fail when it tries to update /etc/resolv.conf.
The handling of /etc/resolv.conf could be improved in dhcpcd but it's not their
job to decide when to remove the symlink. We do have the authority to decide
whether or not to use systemd-resolved or resolvconf in the appliance, so we can
remove it.
After previous changes, this library is no longer used. We have
switched to json-c, for better compatibility with libvirt.
(cherry picked from
guestfs-tools commit e6dcf7e3a7e9170978e57ce6df1b34f92fac5ae3)
We tested for QEMU >= 2.10 support for mandatory locking. I believe
this is for all practical purposes always enabled now (and qemu 2.10
is ancient history) so simply assume it's true always.
Although we don't use JSON_parser in libguestfs, update the submodule
just to get rid of another Jansson dependency:
Richard W.M. Jones (1):
mltools: Replace jansson with json-c
This will eventually replace Jansson for all JSON parsing. However
this commit simply introduces the new dependency in the configure
script and documents it.
I chose json-c 0.14 as the baseline since that is the version in RHEL 9.
Probably earlier versions would work.
All recent compilers support this (except MS compilers which we don't
care about). Assume it is supported. We test it in ./configure and
hard fail if it doesn't work.
We still define HAVE_ATTRIBUTE_CLEANUP but you can now assume it is
always defined and don't have to check it.
The guest was found to have these inspection fields:
type: windows
distro: windows
product_name: Windows Server 2025 Standard
product_variant: Server
version: 10.0
arch: x86_64
hostname: WIN-84V4KKQ30SM
build ID: 26080
windows_systemroot: /Windows
windows_software_hive: /Windows/System32/config/SOFTWARE
windows_system_hive: /Windows/System32/config/SYSTEM
windows_current_control_set: ControlSet001
Reported-by: Ming Xie
Fixes: https://issues.redhat.com/browse/RHEL-62935
Add these two files from the common/ submodule:
common/mlcustomize/v2v-customize-options.pod
common/mlcustomize/v2v-customize-synopsis.pod
Updates: commit fe1ce09242
openEuler is simliar to CentOS, but the ID is not lower-case string,
as below:
NAME="openEuler"
VERSION="24.03 (LTS)"
ID="openEuler"
VERSION_ID="24.03"
PRETTY_NAME="openEuler 24.03 (LTS)"
ANSI_COLOR="0;31"
Signed-off-by: Wang Guoquan <wangguoquan03@foxmail.com>
Virt-v2v already includes facilities for injecting QEMU guest agent
etc. We shouldn't add the virt-customize options for this.
Update common submodule to include:
Richard W.M. Jones (2):
mlcustomize: Move virt-customize modules to mlcustomize/
mlcustomize: Update generated options for virt-v2v
Pull in some fixes from the common submodule. None of these should be
applicable to libguestfs, they apply only to guestfs-tools and
virt-v2v.
Richard W.M. Jones (13):
mlcustomize: Add Inject_virtio_win.inject_blnsvr implementation
mlcustomize: firstboot: Use Linux path for Powershell script path
mlcustomize: firstboot: Use powershell.exe instead of path
mlcustomize: firstboot: Use Powershell -NoProfile flag
mlcustomize: Revert delay installation of qemu-ga MSI
mldrivers/linux_kernels.ml: Prefix general information with ^info:
mlcustomize: Use Start-Process -Wait to run qemu-ga installer
mlcustomize: Add Firstboot.firstboot_dir function
mlcustomize: Place powershell scripts into <firstboot_dir>\Temp
mlcustomize: Inject qemu-ga & blnsvr into <firstboot_dir>/Temp
mlcustomize: Write qemu-ga log file name to log.txt
mlcustomize: Add some comments to firstboot batch file
mlcustomize: Reboot Windows between each firstboot script
Since RHEL 7.4, the noop scheduler is no longer a thing. Trying to
set it results in the error:
+ echo noop
/init: line 108: echo: write error: Invalid argument
The current recommendation (https://access.redhat.com/solutions/5427)
is to use mq-deadline, but that's also the default so we don't have to
do anything.
A bigger reason to remove these lines is that kernel 6.11.0 has
introduced a hang where -- rarely -- the ext4 filesystem hangs if you
try to change the scheduler while handing a page fault, even if you're
setting a scheduler that doesn't exist. I couldn't get much detail
except for a couple of stack traces from different VMs:
crash> set 234
PID: 234
COMMAND: "modprobe"
TASK: ffff9f5ec3a22f40 [THREAD_INFO: ffff9f5ec3a22f40]
CPU: 0
STATE: TASK_UNINTERRUPTIBLE
crash> bt
PID: 234 TASK: ffff9f5ec3a22f40 CPU: 0 COMMAND: "modprobe"
#0 [ffffb21e002e7840] __schedule at ffffffffa718f6d0
#1 [ffffb21e002e78f8] schedule at ffffffffa7190a27
#2 [ffffb21e002e7908] __bio_queue_enter at ffffffffa67e121c
#3 [ffffb21e002e7968] blk_mq_submit_bio at ffffffffa67f358c
#4 [ffffb21e002e79f0] __submit_bio at ffffffffa67e1e3c
#5 [ffffb21e002e7a58] submit_bio_noacct_nocheck at ffffffffa67e2326
#6 [ffffb21e002e7ac0] ext4_mpage_readpages at ffffffffa65ceafc
#7 [ffffb21e002e7be0] read_pages at ffffffffa6381d17
#8 [ffffb21e002e7c40] page_cache_ra_unbounded at ffffffffa6381ff5
#9 [ffffb21e002e7ca8] filemap_fault at ffffffffa63761b5
#10 [ffffb21e002e7d48] __do_fault at ffffffffa63d1892
#11 [ffffb21e002e7d70] do_fault at ffffffffa63d2425
#12 [ffffb21e002e7da0] __handle_mm_fault at ffffffffa63d8c6b
#13 [ffffb21e002e7e88] handle_mm_fault at ffffffffa63d95c2
#14 [ffffb21e002e7ec8] do_user_addr_fault at ffffffffa60b34ea
#15 [ffffb21e002e7f28] exc_page_fault at ffffffffa7186e4e
#16 [ffffb21e002e7f50] asm_exc_page_fault at ffffffffa72012a6
RIP: 000055d16159f8d8 RSP: 00007ffdd4c1f340 RFLAGS: 00010206
RAX: 00000000000bec82 RBX: 00007ff2fd00dc82 RCX: 000055d1615b492a
RDX: 00007ffdd4c216b0 RSI: 00000000200bec82 RDI: 000055d185725960
RBP: 00007ffdd4c1f5a0 R8: 0000000000000000 R9: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00000000200bec82
R13: 000055d185725960 R14: 00007ffdd4c216b0 R15: 000055d1615b9708
ORIG_RAX: ffffffffffffffff CS: 0033 SS: 002b
crash> set 230
PID: 230
COMMAND: "modprobe"
TASK: ffff98ce03ca3040 [THREAD_INFO: ffff98ce03ca3040]
CPU: 0
STATE: TASK_UNINTERRUPTIBLE
crash> bt
PID: 230 TASK: ffff98ce03ca3040 CPU: 0 COMMAND: "modprobe"
#0 [ffffaf9940307840] __schedule at ffffffff9618f6d0
#1 [ffffaf99403078f8] schedule at ffffffff96190a27
#2 [ffffaf9940307908] __bio_queue_enter at ffffffff957e121c
#3 [ffffaf9940307968] blk_mq_submit_bio at ffffffff957f358c
#4 [ffffaf99403079f0] __submit_bio at ffffffff957e1e3c
#5 [ffffaf9940307a58] submit_bio_noacct_nocheck at ffffffff957e2326
#6 [ffffaf9940307ac0] ext4_mpage_readpages at ffffffff955ceafc
#7 [ffffaf9940307be0] read_pages at ffffffff95381d1a
#8 [ffffaf9940307c40] page_cache_ra_unbounded at ffffffff95381ff5
#9 [ffffaf9940307ca8] filemap_fault at ffffffff953761b5
#10 [ffffaf9940307d48] __do_fault at ffffffff953d1895
#11 [ffffaf9940307d70] do_fault at ffffffff953d2425
#12 [ffffaf9940307da0] __handle_mm_fault at ffffffff953d8c6b
#13 [ffffaf9940307e88] handle_mm_fault at ffffffff953d95c2
#14 [ffffaf9940307ec8] do_user_addr_fault at ffffffff950b34ea
#15 [ffffaf9940307f28] exc_page_fault at ffffffff96186e4e
#16 [ffffaf9940307f50] asm_exc_page_fault at ffffffff962012a6
RIP: 0000556b7a7468d8 RSP: 00007ffde2ffb560 RFLAGS: 00000206
RAX: 00000000000bec82 RBX: 00007f5331a0dc82 RCX: 0000556b7a75b92a
RDX: 00007ffde2ffd8d0 RSI: 00000000200bec82 RDI: 0000556ba8edf960
RBP: 00007ffde2ffb7c0 R8: 0000000000000000 R9: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00000000200bec82
R13: 0000556ba8edf960 R14: 00007ffde2ffd8d0 R15: 0000556b7a760708
ORIG_RAX: ffffffffffffffff CS: 0033 SS: 002b
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2303267
Add INSTALL_OCAMLLIB parameter for allowing ocaml install to a user
defined path. If not defined, fallback to `ocamlc -where`.
Signed-off-by: Antonio Caggiano <quic_acaggian@quicinc.com>
